Scribd
Upload
5 views2 pages

DoReMi ENG

The DoReMi seismograph is a modular digital telemetry system designed for seismology, allowing for flexible configuration and easy transport. It features advanced noise reduction, digital transmission, and a range of software tools for data management, making it suitable for various seismic surveys. The system is fully customizable, offers robust customer support, and has been proven reliable over 15 years of operation.

Uploaded by

Luis Caraballo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views2 pages

DoReMi ENG

The DoReMi seismograph is a modular digital telemetry system designed for seismology, allowing for flexible configuration and easy transport. It features advanced noise reduction, digital transmission, and a range of software tools for data management, making it suitable for various seismic surveys. The system is fully customizable, offers robust customer support, and has been proven reliable over 15 years of operation.

Uploaded by

Luis Caraballo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

©

DoReMi
Technologies for seismology, engineering and geophysics

The DoReMi© seismograph is a digital telemetry system with the


recording electronics embedded in the cable.This architecture
has several benefits, especially in the modularity and possibility
to operate in any position of the seismic line.

Each channel works as a single seismograph, and when linked


with other elements, creates a network that is easy to transport
using its cable wheeler. The system is fully modular, allowing you
to purchase the exact number of channels you need, ranging
from 1 to 255.

A lightweight and durable rechargeable battery is built in the


main interface. When not used, the system enters standby mode
to preserve battery power.

By having the A/D converter very close to the geophone, most


of the electromagnetic noise that affects other instruments is
eliminated. Digital transmission prevents signal loss and
crosstalk along the cable. The system architecture offers also
other benefits:
• add cable extensions
• overcome obstacles
• replace individual channels
• share channels with working partners
• roll-along procedures can be strongly simplified

The software, available in Italian, English, and Chinese, is


flexible and providing a lot of tools to simplify the on-site data
quality checks, some of them are:
• Pre-shot noise monitoring
• Downhole data acquisition management
• Surface acquisition management
• SH shots signal inversion and overlapping
• Data interlacing and roll-along acquisition
• Refraction and HVSR preview
• Filtering, frequency spectrum, FK and FV spectrums
• Compatability of data output with any processing software

Typically used for MASW surveys, it can be used for any other
seismic survey:
• Refraction (GRM and Tomography)
• Reflection (1D and 2D)
• ESAC/SPAC, ReMi and HVSR
• Water search (SSV)
• Downhole / Crosshole (with SS-BH-5C)

Entirely designed and produced in-house, our company


guarantees fast customer service, training, customization, and
consultation. With over 15 years of heavy operation and
hundreds of clients worldwide, the system has proven to
be one of the most reliable and practical systems on
the market.

DV02_DoReMi_ENG
©
DoReMi
Technologies for seismology, engineering and geophysics
Specifications:
No. of bits 16 24 No. of bits 16 24

AD converter type: SAR SIGMA DELTA Connector: XLR 4 poles XLR 4 poles

Converter input span: 5V 5V Geophones


connector: Split spring Split spring
S/N ratio @ 500 SPS: 96 dB (@ 27db gain) 140 dB
Diagnosis: Memory Memory + Vdc
S/N ratio @ 5000 SPS: 94 db (@ 27 db gain) 130 dB
BUS
S/N ratio @ 20000 SPS: 92 db (@ 27db gain) 105 dB communication: 115 kbps 115-300kbps

Input type: For geophones For geophones DATA transfer to PC: USB USB

Input impedance: >20 kΩ >20 kΩ Data Format: .drm, SEG-2, SEG- .drm, SEG-2, SEG-
Y, .saf, .csv Y, .saf, .csv
Common mode Operating
rejection: > 80 dB > 80 dB temperature: -20 / +70 °C -20 / +70 °C

Band pass: 2 - 200 Hz DC - 400 Hz Storage


temperature: -40 / +90 °C -40 / +90 °C
Filters (IIR o 0 Phase): Low pass, High pass, Low pass, High pass,
notch and notch and Maximum number
customizable customizable of power booster: 8 8
Max sampling lag
between Ch.: < 30 ppm < 30 ppm Humidity: 0 - 100 % 0 - 100 %

Max error between Certifications: CE CE


trigger Ch.: < 0.2 us < 0.2 us

Maximum samples: 30000 40000

Sampling rates: 200Hz to 50000 Hz 200 Hz to 20000 Hz

Maximum connectable
channels: 255 255

Power supply: 18Vdc embedded 18Vdc embedded


NiMh battery NiMh battery

Power consumption: ≈ 0.3 W per Ch. ≈ 0.3 W per Ch.

Nominal battery
worktime (24ch): 300 shots @ 300 shots @
0.5ms / 2s 0.5ms / 2s
Instrument chain max
length: 1000 m 1000m

Best results
geophones: 4.5 Hz High Gain 4.5 Hz High Gain
80 V/m/s 80 V/m/s
Interdistance
geophones: 5m (customizable at 5m (customizable at
order) order)

Notice! This paper is an information leaflet only; it is published without programmed updates. All
specifications, features and prices are subjected to changes without any prior notice. In the event
of any discrepancies between this document and a commercial offer or bidding document, these
latter will take precedence.

SARA electronic instruments s.r.l.


Registered office - Via A. Mercuri, 4 – 06129, Perugia – Operations: – Via A.Morettini, 11 – 06128, Perugia - ITALY
Phone: +39 075 5051014 - +39 075 9370309 - +39 075 3726002 - +39 328 4165648 – www.sara.pg.it – [email protected]

You might also like