Data Sheet

Jan 3, 2025

SIZE WEIGHT GRADE COUP FF

Imperial Metric
Pipe Body Wall 0.254 in 6.45 mm
Pipe ID 2.992 in 76.00 mm
Drift Diameter 2.867 in 72.82 mm
1,671 mm
Pipe Cross Section 2.59 in2 2
PIPE
10,540 ps
Collapse Pressure 72.67 MPa
i
10,160 ps
Internal Yield Pressure 70.05 MPa
i
Pipe Body Yield Strengt
207 kip 922 kN
h
80,000 ps
Min Yield Strength 552 MPa
i
95,000 ps
MATERIAL Max Yield Strength
i
655 MPa

95,000 ps
Min Tensile Strength 655 MPa
i
Coupling OD 3.883 in 98.63 mm
Coupling ID 2.963 in 75.26 mm
Graph Signature Tensile Efficiency 100% 100%
COUPLING 180.09 m
Coupling Length 7.090 in
m
Make-up Loss Length 3.1350 in 79.63 mm
Bearing Face Load 89 kip 397.78 kN
10,540 ps
Collapse Pressure 72.67 MPa
i
10,160 ps
Internal Yield Pressure 70.05 MPa
i
CONNECTION PERFORMA Joint Strength 207 kip 922 kN
NCE
Joint Tensile Efficiency 100% 100%
Compression Rating 166 kip 737 kN
Max Bending w/ Sealab
20°/100ft
ility
Min Torque 3,500 ft-lb 4,745 Nm
Opt Torque 3,870 ft-lb 5,247 Nm
FIELD MAKE-UP TORQUE Max Torque 4,240 ft-lb 5,749 Nm
Min Shoulder 581 ft-lb 788 Nm
Max Shoulder 3,096 ft-lb 4,198 Nm

JFE has performed and continues to perform connection and qualification testing according to the most rigorous industry and customer standards.
Performance ratings are uniaxial ratings based on specified pipe minimum performance properties.
The use of this information is at the reader's risk and no warranty is implied or expressed by JFE Steel Corporation with respect to the use of
information contained herein. The information in this publication is subject to change or modification without notice. Please contact the JFE Steel
office. For questions regarding the data, please email [email protected].