Cyber Security 110
Cyber Security 110
1) What is cybersecurity?
Information security
Network security
Operational security
Application security
End-user education
Business continuity planning
4) Define Cryptography.
6) What is CIA?
7) What is a Firewall?
It is a security system designed for the network. A firewall is set on the boundaries of
any system or network which monitors and controls network traffic. Firewalls are
mostly used to protect the system or network from malware, worms, and viruses.
Firewalls can also prevent content filtering and remote access.
8) Explain Traceroute
It is a tool that shows the packet path. It lists all the points that the packet passes
through. Traceroute is used mostly when the packet does not reach the destination.
Traceroute is used to check where the connection breaks or stops or to identify the
failure.
Usage HIDS is used to detect the intrusions. NIDS is used for the
network.
Data leakage is an unauthorized transfer of data to the outside world. Data leakage
occurs via email, optical media, laptops, and USB keys.
It is the technique for identifying open ports and service available on a specific host.
Hackers use port scanning technique to find information for malicious purposes.
1. Physical Layer
2. Data Link Layer
3. Network Layer
4. Transport Layer
5. Session Layer
6. Presentation Layer
7. Application Layer
VPN stands for Virtual Private Network. It is a network connection method for
creating an encrypted and safe connection. This method protects data from
interference, snooping, censorship.
Black hat hackers are people who have a good knowledge of breaching network
security. These hackers can generate malware for personal financial gain or other
malicious reasons. They break into a secure network to modify, steal, or destroy
data so that the network can not be used by authorized network users.
White hat hackers or security specialist are specialized in penetration testing. They
protect the information system of an organization.
Grey hat hackers are computer hacker who sometimes violate ethical standards, but
they do not have malicious intent.
There are various ways to reset BIOS password. Some of them are as follows:
It is a protocol used for finding MAC address associated with IPv4 address. This
protocol work as an interface between the OSI network and OSI link layer.
It's a number of internet-connected devices like servers, mobile devices, IoT devices,
and PCs that are infected and controlled by malware.
The main difference between these two is that SSL verifies the identity of the sender.
SSL helps you to track the person you are communicating to. TLS offers a secure
channel between two clients.
TFA stands for Two Factor Authentication. It is a security process to identify the
person who is accessing an online account. The user is granted access only after
presenting evidence to the authentication device.
Symmetric encryption requires the same key for encryption and decryption. On the
other hand, asymmetric encryption needs different keys for encryption and
decryption.
WAF stands for Web Application Firewall. WAF is used to protect the application by
filtering and monitoring incoming and outgoing traffic between web application and
the internet.
A Hacker is a person who finds and exploits the weakness in computer systems,
smartphones, tablets, or networks to gain access. Hackers are well experienced
computer programmers with knowledge of computer security.
Network sniffing is a tool used for analyzing data packets sent over a network. This
can be done by the specialized software program or hardware equipment. Sniffing
can be used to:
Yong domains are easily infected with malicious software. You need to use DNS
monitoring tools to identify malware.
SSH stands for Secure Socket Shell or Secure Shell. It is a utility suite that provides
system administrators secure way to access the data on a network.
SSL verifies the sender's identity, but it does not provide security once the data is
transferred to the server. It is good to use server-side encryption and hashing to
protect the server against a data breach.
Black box testing: It is a software testing method in which the internal structure
or program code is hidden.
White box testing: A software testing method in which internal structure or
program is known by tester.
Vulnerabilities refer to the weak point in software code which can be exploited by a
threat actor. They are most commonly found in an application like SaaS (Software
as a service) software.
39) Define the term residual risk. What are three ways to deal with risk?
It is a threat that balances risk exposure after finding and eliminating threats.
1. Reduce it
2. Avoid it
3. Accept it.
Data exfiltration refers to the unauthorized transfer of data from a computer system.
This transmission may be manual and carried out by anyone having physical access
to a computer.
Following are the common cyber-attacks which can be used by hackers to damage
network:
Malware
Phishing
Password attacks
DDoS
Man in the middle
Drive-by downloads
Malvertising
Rogue software
In order to authenticate users, they have to provide their identity. The ID and Key
can be used to confirm the user's identity. This is an ideal way how the system
should authorize the user. Page: 6 of 17
can be used to confirm the user's identity. This is an ideal way how the system
should authorize the user.
46) Name the protocol that broadcast the information across all the
devices.
Use cipher algorithm to protect email, credit card information, and corporate data.
Public Wi-Fi has many security issues. Wi-Fi attacks include karma attack, sniffing,
war-driving, brute force attack, etc.
Public Wi-Fi may identify data that is passed through a network device like emails,
browsing history, passwords, and credit card data.
Data encryption is a technique in which the sender converts the message into a
code. It allows only authorized user to gain access.
Diffie-Hellman is a protocol used while exchanging key between two parties while
RSA is an algorithm that works on the basis two keys called private and public key.
The user uses RDP client software to serve this purpose while other device must run
RDP server software. This protocol is specifically designed for remote management
and to access virtual PCs, applications, and terminal server.
Forward Secrecy is a security measure that ensures the integrity of unique session
key in event that long term key is compromised.
IV stands for the initial vector is an arbitrary number that is used to ensures that
identical text encrypted to different ciphertexts. Encryption program uses this
number only once per session.
54) Explain the difference between stream cipher and block cipher. Page: 7 of 17
number only once per session.
54) Explain the difference between stream cipher and block cipher.
How does it Stream cipher operates on small Block cipher works on large
work? plaintext units data blocks.
RCx
Blowfish
Rijndael (AES)
DES
The full form of ECB is Electronic Codebook, and the full form of CBC is Cipher Block
Chaining.
Buffer overflow attack is an attack that takes advantage of a process that attempts
to write more data to a fixed-length memory block.
Spyware is a malware that aims to steal data about the organization or person. This
malware can damage the organization's computer system.
SRM stands for Security Reference Monitor provides routines for computer drivers to
grant access rights to object.
A virus is a malicious software that is executed without the user's consent. Viruses
can consume computer resources, such as CPU time and memory. Sometimes, the
virus makes changes in other computer programs and insert its own code to harm
the computer system.
Human-based attack: They may pretend like a genuine user who requests higher
authority to reveal private and confidential information of the organization.
Computer-based attack: In this attack, attackers send fake emails to harm the
computer. They ask people to forward such email.
Mobile-based attack: Attacker may send SMS to others and collect important
information. If any user downloads a malicious app, then it can be misused to
access authentication information.
MAC Address is the acronym for Media Access Control address. MAC addresses are
used to uniquely identify network interfaces for communication at the physical layer
of the network.
How they infect It inserts malicious code into a Generate it's copy and spread
a computer? specific file or program. using email client.
Dependency Virus need a host program to They do not require any host
work to function correctly.
Linked with files It is linked with .com, .xls, .exe, It is linked with any file on a
.doc, etc. network.
Tcpdump
Kismet
Wireshark
NetworkMiner
Dsniff
Antivirus is software tool that is used to identify, prevent, or remove the viruses
present in the computer. They perform system checks and increase the security of
the computer regularly.
Protocol Sniffing
Web password sniffing
Application-level sniffing
TCP Session stealing
LAN Sniffing
ARP Sniffing
TCP session hijacking is the misuse of a valid computer session. IP spoofing is the
most common method of session hijacking. In this method, attackers use IP packets
to insert a command between two nodes of the network.
Hacking Tools are computer programs and scripts that help you find and exploit
weaknesses in computer systems, web applications, servers, and networks. There
are varieties of such tools available on the market. Some of them are open source,
while others are a commercial solution.
RSA
Twofish
AES
Triple DES
It is not right to send login credentials through email because if you send someone
userid and password in the mail, chances of email attacks are high.
This rule is based on the percentage of network traffic, in which 80% of all network
traffic should remain local while the rest of the traffic should be routed towards a
permanent VPN.
It is a method used for a security breach in wireless networks. There are two types of
WEP cracking: 1) Active cracking and 2) Passive cracking.
Aircrack
WebDecrypt
Kismet
WEPCrack
It is a technique used to obtain a username, password, and credit card details from
other users.
Nano encryption is a research area which provides robust security to computers and
prevents them from hacking.
Security scanning involves identifying network and system weaknesses and later
provides solutions for reducing these risks. This scanning can be performed for both
Manual as well as Automated scanning.
Acunetix
WebInspect
Probably
Netsparker
Angry IP scanner:
Burp Suite
Savvius Page: 12 of 17
Burp Suite
Savvius
Financial sectors like stock trading exchanges, investment banking, want their
data to be secured, and penetration testing is essential to ensure security.
In case if the software system is already hacked and the organization would like
to determine whether any threats are still present in the system to avoid future
hacks.
Security threat is defined as a risk which can steal confidential data and harm
computer systems as well as organization.
98) List security vulnerabilities as per Open Web Application Security Page: 13 of 17
98) List security vulnerabilities as per Open Web Application Security
Project (OWASP).
Security vulnerabilities as per open web application security project are as follows:
SQL Injection
Cross-site request forgery
Insecure cryptographic storage
Broken authentication and session management
Insufficient transport layer protection
Unvalidated redirects and forwards
Failure to restrict URL access
An access token is a credential which is used by the system to check whether the
API should be granted to a particular object or not.
ARP poisoning is sending fake addresses to the switch so that it can associate the
fake addresses with the IP address of a genuine computer on a network and hijack
the traffic.
Trojans
Adware
Worms
Spyware
Denial of Service Attacks
Distributed Denial of Service Attacks
Virus
Key loggers
Unauthorized access to computer systems resources
Phishing
Hybrid attack is a blend of dictionary method and brute force attack. This attack is
used to crack passwords by making a change of a dictionary word with symbols and
numbers.
Nmap is a tool which is used for finding networks and in security auditing. Page: 14 of 17
104) What is Nmap?
Nmap is a tool which is used for finding networks and in security auditing.
EtterPeak is a network analysis tool that is used for sniffing packets of network
traffic.
There are two types of cyberattacks: 1) Web-based attacks, 2) System based attacks.
Some web-based attacks are: 1) SQL Injection attacks, 2) Phishing, 3) Brute Force, 4)
DNS Spoofing, 4) Denial of Service, and 5) Dictionary attacks.
Virus
Backdoors
Bots
Worm
There are four types of cyber attackers. They are: 1) cybercriminals, 2) hacktivists, 3)
insider threats, 4) state-sponsored attackers.
They are threats that are accidently done by organization employees. In these
threats, an employee unintentionally deletes any file or share confidential data with
outsiders or a business partner going beyond the policy of the company.
Report a Bug
Prev Next
Top Tutorials
About
About Us
Advertise with Us
Write For Us
Selenium Testing Hacking
Contact Us
Career Suggestion
SAP Career Suggestion Tool
Software Testing as a
Career
Interesting
eBook SAP Java Python
Blog
Quiz
SAP eBook
Execute online
Execute Java Online
Execute Javascript
Execute HTML
Jmeter Informatica JIRA
Execute Python
Page: 16 of 17
© Copyright - Guru99 2020 Privacy Policy | Affiliate Disclaimer | ToS
Page: 17 of 17