PROPOSED SATELLITE DISPENSARY AT KAPDENING ESTATE - ELDAMA RAVINE

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO 01
SUB-STRUCTURES(ALL
PROVISIONAL)
Excavations and earthworks
Site Preparations
Clearing site vegetation,grubbing up roots
and filling up voids left with selected
excavated materials.
Bushes,shrubs,undergrowth or the like and cart
A 150 SM
away from site.

Excavations.
Excavating vegetable soil for
presevation,evarage 200mm thick.

Load up and store on site,later level and spread

B as directed on site and cart away surplus 150 SM
excavated materials.
Excavating trenches; to receive foundations
starting from reduced level.
C Not exceeding 1.50m deep. 82 CM

Breaking out existing material; extra over

all kinds of excavations irrespective of deep.

D Rock irrespective of class. 5 CM

Excavate pit for column bases starting from

E 44 CM
stripped level not exceeding 1.50m deep.
Carried forward to Collection

SDK /1
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
Disposal

Excavated materials; backfilling depositing and

A 45 CM
compacting in layers maximum 150mm thick.

B Surplus excavated material removing from site. 64 CM

Disposal of water
Labour and materials,keeping excavations free
C ITEM
from general waters.

Planking and Strutting

Labour and materials. To uphold sides of
D ITEM
excavation generally.

Filling.
Harcore.
300mm thick depositing and compacting layer
E 150 SM
maximum 150mm thick in making up levels.

Murram
F Blinding surfaces of fill 50mm thick. 150 SM
Anti-termite and HerbicideTreatment
Apply "Termidor 25EC" solution or other
equal and approved sprayed evenly.

G To surface of fill and tops of foundation walls. 150 SM

Concrete works.
Insitu concrete,reinforcement.
Plain mix 1:4:8 in foundation strip blinding
H 70 SM
50mm thick.

J Ditto in column bases. 42 SM

Carried forward to Collection

SDK /2
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Reinforced concrete classs 1:2:4 in:-

A Foundation strips irrespective of depth. 11 CM

B Column bases. 13 CM
C Ramp Starter 1 CM
D Columns generally. 3 CM

F Floor beds 150mm thick. 150 SM

Reinforcement.
Bars: high tensile steel;cold worked;B.S.
4461 including bends, hooks,tying wire
distance blocks and spacers.
G 16 mm diameter bars. 1,420 KGS
H 12 mm diameter bars. 40 KGS
I 10mm diameter bars. 300 KGS
J 8mm diameter bars. 140 KGS
Fabric B.S 4483
Reference A142; mesh 200x200mm weight
2.22kg per square metre(measured net-no
K allowance made for laps); including 150 SM
bends,tying wire and distance blocks in any
location.
Sawn formwork to insitu concrete.
L Edges of floor bed 75to 150mm wide. 53 LM
M Sides of vertical columns. 51 SM
O Edges of foundation bases. - SM
Walling
225mm thick approved local stone,roughly
squared; bedding and jointing in cement mortar
P 116 SM
(1;4); reinforced with hoop iron gauge 500 in
every alternate course.

Carried forward to Collection

SDK /3
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
Damp proof membranes.
Polythene,500 guage, 150mm laps-no
allawance made for laps.
A Horizontal, 1 no.of layer(s)over300mm wide. 116 SM
Plinth finishes

Render,cement and sand (1:4), wood floated

12mm thick 2 no.coatwork,to concrete or

B 32 SM
masonry base(m/s),generally external.

C Ditto 20mm paving in steps finished smooth - SM

12mm thick in two coats render(1:6) to plinth

D - SM
area.

Painting:3 coats black bituminous paint to:-

E Rendered surfaces externally. 32 SM

Paving slabs.
Precast concrete, class 20/20
600x600x50mm thick slabs laid on and
including 50mm(consolidated) bed of sand;
F 31 SM
jointed and pointed in cement sand (1:3)
mortar, V-joints.

Carried forward to Collection

Brought forward from page no. SDK/1

Brought forward from page no. SDK/2

Brought forward from page no. SDK/3

Brought forward from SDK/4 above

Carried forward to summary

SDK /4
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO. 02.

GROUND FLOOR FRAME
Vibrated reinforced insitu concrete (1:2:4)
in
A Columns. 6 CM
B Main and intermediate beams. 6 CM
C 150mm thick suspended slab. 118 SM
D Ramp 30 SM
Reinforcement, as described, (ALL
PROVISIONAL)
Bars: high tensile steel;cold worked;B.S.
4461 including bends, hooks,tying wire
distance blocks and spacers.
E 16mm diameter bars. 1,650 KG

F 12mm diameter bars. 600 KG

G 10mm diameter bars 1,240 KG

H 8mm diameter bars. 400 KG

Sawn formwork to:-
I Vertical sides of the column. 102 SM

K Soffites of Slab and Ramp 144 SM

Sides and soffites of main and intermediate
L 93 SM
beams.
M Edges of floor bed 75to 150mm wide. 50 LM
Expansion joint
20mm thick "Flexcell" or other equal and
N approved expansion joint filler between - SM
concrete surfaces
Carried forward to Collection
COLLECTION

Brought forward from SDK/5 above

Total for Ground Floor Frame Element No
2 Carried forward to summary.

SDK /5
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO. 03

WALLING.

Masonry.

200mm thick chisel-dressed on one side

approved natural stone walling bedded and
jointed in cement sand (1:3) mortar,reinforced
A at every alternate course,with neat horizontally 178 SM
raked joints and flush vertical externally as
work proceeds,internal left plain in readiness
for plastering.

B 150mm Ditto 10 SM
Damp proof courses.
B.S 743,type A , bitumen hessian base
150mm laps,no allowances made for laps.

200mm wide,bedded in cement sand

C 89 LM
mortar(1:3).

D 150mm Ditto 4 LM

Carried forward to Collection

SDK /6
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
ELEMENT NO.04
WINDOWS.
Precast concrete,normal, class 20/20mm
vibrated.
Sills 175x75mm thick,once sunk
weathered,once throated,reinforced as
A 14 LM
necessary for handling,bedding,jointed and
pointing in cement sand mortar(1:4).
Accessories.
Metal work .
Purpose made units.
Casement window standard metal casement
sections,permanent ventilators comprising T-
bar gauze and metal hood to full width of
window,one coat primer by manufacturer
complete with all necessary
ironmongery,steel cutting and pinning to
concrete or blockwork, fixing to head and
sill with screws and plugging.

B Overall size 1500x1500 mm high. 5 No.

C Overall size 900x1500 mm high. 4 No.
D Ditto but Size 610 x 610mm high 4 No.

Welded metal grill burglar proofing in

25mm SHS bars with openable lower half,
one coat primer including cutting and
pinning to concrete or masonry fixing head
and sill with screws and plugging
E Overall size 1500x1500 mm high. 5 No.
F Overall size 900x1500 mm high. 4 No.

Carried forward to Collection

SDK /7
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
Glazing.
4mm thick clear sheet glass to metal with putty
A 18 SM
1.00 to 1.50 square metres.

Painting and decorating.

One undercoat two finishing coats oil paint
full gloss finish to Crown Paints or equal
and approved.
B Metal window surfaces over 300mm girth. 5 SM

Concrete surfaces 200 to 300mm girth

C 9 LM
external.

Carried forward to Collection

COLLECTION
Brought forward from page no. SDK/7

Brought forward from SDK/8 above

Total for Ground floor windows Element

No 04 Carried to summary

SDK /8
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO.05
DOORS.
Joinery.
Frames,wrot mahogany or equivalent
hardwood.
A 150x50mm rebated. 68 LM

B 150x50mm transom. 11 LM

C 20x25mm glazing beads. 58 LM

D Ditto quadrant. 72 LM

E 45x25mm architraves. 79 LM

Flush doors, B.S. 459,part 2.

Single solid core door 45mm
F thick,850x2055mm high mahogany veneered 12 No.
facing and hardwood lipping all edges.
Metal doors
1200mm wide x 2550mm high overall mild steel
G panelled door in two equal leaves each size
750mm x 2550mmhigh comprising of 75 x 50
x 6mm thick mild steel framing all round ,1.6mm
thick mild steel sheet welded to 75 x 50 x6 mm thick
angle bracings top and middle rails complete
with handles purpose made hinges and all
necessary accessories including priming with one
coat of red oxide primer before delivery to site
and all welds ground smooth

Carried forward to Collection

SDK /9
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Glazing.
4mm thick clear sheet glass to casement with
A 4 SM
putty 0.10 to 0.5 square metres.
Ironmongery.
Supply and fix the following.
B Steel brass coated butt hinges 100mm. 36 pr

225x25x3mm thick door fixing cramps one end

C bent and twice screwed to frame and the other 12 No.
end fanged and built in to blockwork.

3-lever mortice lock catalogue No.2237

D 12 No.
complete with set lever handle furniture.

Painting and decorating.

One coat aluminium hardwood primer to
Crown Paints or equal and approved.

Wood surfaces before fixing not exceeding 100

E 79 LM
to 200mm girth internal.

Carried forward to Collection

SDK /10
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
One undercoat two finishing coats
polyuratheane laquer to Crown Paints or
equal and approved.

Wood surfaces over 300mm girth external /

A 68 SM
internal.

B Wood surfaces 200 to 300mm girth external. 11 LM

C Ditto surfaces not exceeding 100mm girth. 151 LM

D Ditto metal surface of the door 23 SM

E Ditto transom. 1 SM

Carried forward to Collection

COLLECTION

Brought forward from page No. SDK/9

Brought forward from page No.SDK/10

Brought forward from SDK/11 above.

Total forElement No. 05 Ground Floor

Doors Carried to Summary

SDK /11
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
ELEMENT NO.06.
FINISHES.
FLOORS.

30mm thick cement and sand (1:4) paving

A 150 SM
screed finished with wood float to Terrazzo

C 30mm thick terrazzo paving machine polished 150 SM

20 x 100m high polished terrazzo skirting,

D rounded junction with wall finish and coved 131 LM
junction with floo

Dividing strips PVC 3 x 25mm setting in

E 100 LM
terrazzo (Provisional)

WALLS.
15mm thick,2No.coat work plaster 1:1:6 to
G masonry/concrete surfaces internal steel 106 SM
trowelled.

12mm thick,2No.coat work plaster 1:1:6 to

H - SM
masonry surfaces internal to receive wall tiles.

15mm thick,2No.coat work plaster 1:3 to

J concrete surfaces externally finished with 27 SM
wood float.
Key pointing of dressed natural stone external
K 82 SM
walling along horizontal joints.
Carried forward to Collection

SDK /12
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
CEILINGS.
12mm thick cement lime sand (1:1:6) plaster
A 118 SM
on ceiling .
Painting and decorating.
three coats PCA based emulsion paint to
Crown Paint or equal and approved.
Plastered wall surfaces over 300mm girth
B 106 SM
internal.

C Ditto soffits of suspended ceiling. 118 SM

Rendered wall surfaces over 300mm girth

D 27 SM
external.
Carried forward to Collection

Brought forward from SDK/12 above

Brought forward from SDK/13 above

Total for element no 06 ground floor

finishes carried to summary

SDK /13
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

SUMMARY

GROUND FLOOR WORKS

1 SUBSTRUCTURE FROM SDK/4

2 GROUND FLOOR FRAME FROM SDK/5

3 GROUND FLOOR WALLING FROM SDK/6

4 GOUND FLOOR WINDOWS SDK/8

5 GROUND FLOOR DOORS SDK/11

6 GROUND FLOOR FINISHES SDK/13

TOTAL FOR GROUND FLOOR WORKS

CARRIED TO MAIN SUMMARY

SDK /14
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO. 01.

FIRST FLOOR FRAME

Vibrated reinforced insitu concrete (1:2:4) in

A Columns. 6 CM
B Ring beam 5 CM
Reinforcement, as described, (ALL
PROVISIONAL)
Bars: high tensile steel;cold worked;B.S. 4461
including bends, hooks,tying wire distance blocks
and spacers.
C 16mm diameter bars. 800 KG
D 12mm diameter bars. 160 KG

F 8mm diameter bars. 450 KG

Sawn formwork to:-
G Vertical sides of the column. 102 SM

L Vertical sides of slab of girth 75 to 150mm high. - SM

M Sides and soffites of Ring beams. 66 SM

Expansion joint
20mm thick "Flexcell" or other equal and
N approved expansion joint filler between concrete - SM
surfaces
Carried forward to Collection
COLLECTION
Brought forward from SDK/15 above
Total for First Floor Frame Element No 1 Carried
forward to summary.
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO.02.

BALCONY BALUSTRADE.

(PROVISIONAL).

Concrete Sundries.

Form pocket not exceeding 100mm deep for fish-tailled

A end of 40x40mm square hollow section,and later make 38 No.
good with cement and sand (1:2) grout.

The following in the mild steel balustrading

including grinding all welds smooth. Rectangular
hollow sections.

25x25x3.0mm baluster 985mm high,one end welded to

B 281 No.
the bottom rail and other end welded to the middle rail

40x40x3.0mm baluster 1200mm long,one end fish-

C tailled and cast into mortice in concrete(m/s) and other 38 No.
end welded to hand-rail.

50x25x3mm hand rail. 56 LM

D
50x25x3mm middle rail. 56 LM
E
F 50x25x3mm lower rail . 56 LM

G welded end. 88 No.

Carried forward to Collection

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Painting and decorating on metalwork.

Touch up primer,prepare and apply two undecoats
and one gloss finishing coat oil paint on the
following steel surfaces internally.

490 LM
A Surfaces not exceeding 100mm girth.

B - LM
Surfaces over 100 but not exceeding 200mm girth.

Carried forward to Collection

COLLECTION

Brought forward from page No.SDK/16

Brought forward from SDK/17 above.

Total for Element No. 02 Balcony Balustrade

Carried to Summary.
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO. 03

WALLING.

Masonry.

200mm thick chisel-dressed on one side approved

natural stone walling bedded and jointed in cement sand
(1:3) mortar,reinforced at every alternate course,with
A 178 SM
neat horizontally raked joints and flush vertical
externally as work proceeds,internal left plain in
readiness for plastering.

B 150mm Ditto but for closing eaves 25 SM

Damp proof courses.

B.S 743,type A , bitumen hessian base 150mm

laps,no allowances made for laps.

C 200mm wide,bedded in cement sand mortar(1:3). 89 LM

D 150mm Ditto 4 LM

Carried forward to Collection

ITEM DESCRIPTION QUANTITY UNIT RATE KSHS

ELEMENT NO. 4

ROOFING

Construction

All timber to be sawn cypress of G.S.

grade seasoned to an equilibrium
moisture content of between 9% and 15%
and to the requirement of K.S. 02 771 of
1991 treated with approved wood
preservative

A. 100 x 50mm Wall plate on and including

10mm cement and sand (1:4) mortar bed
secured to reinforced concrete ringbeam(m.s.)
by black mild steel anchor bolts (m.s.) 105 LM

The following in 18 No. Nailed timber

trusses spanning clear 10150mm (average)
height 2330mm including hoisting and
placing 2700mm above first floor slab level

B. 100 x 50mm Trussed rafter 196 LM

C. 100 x 50mm Tie beam/king post 130 LM

D. 100 x 50mm Strut/tie 160 LM

Carried to collection
SDK/18
ITEM DESCRIPTION QUANTITY UNIT RATE KSHS

Independent members

A 75x 50mm purlins 210 LM

Covering

B Gauge 28"GCI" Pre-painted

sheet roofing fixed on purlins(m.s.) 198 SM

C Gauge 28 Ridge capping to match covering 18 LM

Wrot cypress

D 25 x 225mm Fascia board fixed to end of

rafters(m.s) 36 LM

E 25 x 225mm Barge board fixed to end of

battens 22 LM

Sundries

F 12mm Diameter x 250mm long black mild steel

anchor bolt embedded 180mm deep in
ringbeam at 1200mm centres including drilling
holes in timber 14 NO

G 100 x 100 x 6mm Thick galvanized mild steel

nailing cleat once bent to form angle ; ten
times drilled ; one flange nailed to foot of rafter
(m.s.) other nailed to top of wallplate (m.s.) 14 NO

Painting

Prime only back of wood before fixing

H. Surfaces 100-200mm girth 36 LM

Knot prime stop and apply one under coat

and two finishing coats gloss oil paint to;

J. General surfaces of wood 200 - 300mm girth 22 LM

Carried to collection
SDK19
 COLLECTION

Brought forward from page SDK 18

Brought forward from page SDK 19

TOTAL FOR ELEMENT NO.4

ROOFING
CARRIED TO SUMMARY SDK/20 -
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
ELEMENT NO.04

WINDOWS.

Precast concrete,normal, class 20/20mm vibrated.

Sills 175x75mm thick,once sunk weathered,once

throated,reinforced as necessary for
A 14 LM
handling,bedding,jointed and pointing in cement sand
mortar(1:4).

Accessories.
Metal work .
Purpose made units.

Casement window standard metal casement

sections,permanent ventilators comprising T-bar
gauze and metal hood to full width of window,one
coat primer by manufacturer complete with all
necessary ironmongery,steel cutting and pinning to
concrete or blockwork, fixing to head and sill with
screws and plugging.

B Overall size 1500x1500 mm high. 5 No.

C Overall size 900x1500 mm high. 4 No.

D Ditto but Size 610 x 610mm high 4 No.

Welded metal grill burglar proofing in 25mm SHS

bars with openable lower half, one coat primer
including cutting and pinning to concrete or
masonry fixing head and sill with screws and
plugging

E Overall size 1500x1500 mm high. 5 No.

F Overall size 900x1500 mm high. 4 No.

Carried forward to Collection

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Glazing.
4mm thick clear sheet glass to metal with putty 1.00 to
A 18 SM
1.50 square metres.

Painting and decorating.

One undercoat two finishing coats oil paint full gloss

finish to Crown Paints or equal and approved.

B Metal window surfaces over 300mm girth. 5 SM

C Concrete surfaces 200 to 300mm girth external. 9 LM

Carried forward to Collection -

COLLECTION
Brought forward from page no. SDK/21 -

Brought forward from SDK/22 above -

Total for First floor windows Element No 04
-
Carried to summary
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
ELEMENT NO.05
DOORS.
Joinery.

Frames,wrot mahogany or equivalent hardwood.

A 150x50mm rebated. 68 LM

B 150x50mm transom. 11 LM

C 20x25mm glazing beads. 58 LM

D Ditto quadrant. 72 LM

E 45x25mm architraves. 79 LM

Flush doors, B.S. 459,part 2.

Single solid core door 45mm thick,850x2055mm high

F mahogany veneered facing and hardwood lipping all 12 No.
edges.
Metal doors -

1200mm wide x 2550mm high overall mild steel

panelled door in two equal leaves each size 750mm x
2550mmhigh comprising of 75 x 50 x 6mm thick mild
steel framing all round ,1.6mm thick mild steel sheet
G welded to 75 x 50 x6 mm thick angle bracings top and - No. -
middle rails complete with handles purpose made
hinges and all necessary accessories including priming
with one coat of red oxide primer before delivery to site
and all welds ground smooth

Carried forward to Collection -

ITEM DESCRIPTION QTY UNIT RATE AMOUNT
Glazing.
4mm thick clear sheet glass to casement with putty 0.10
A 4 SM
to 0.5 square metres.
Ironmongery.
Supply and fix the following.
B Steel brass coated butt hinges 100mm. 36 pr

225x25x3mm thick door fixing cramps one end bent

C and twice screwed to frame and the other end fanged 12 No.
and built in to blockwork.

3-lever mortice lock catalogue No.2237 complete with

D 12 No.
set lever handle furniture.

Painting and decorating.

One coat aluminium hardwood primer to Crown

Paints or equal and approved.

Wood surfaces before fixing not exceeding 100 to

E 79 LM
200mm girth internal.

Carried forward to Collection

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

Prepare and apply One undercoat two finishing

coats polyuratheane laquer to Crown Paints or
equal and approved.
A Wood surfaces over 300mm girth external / internal. 68 SM

B Wood surfaces 200 to 300mm girth external. 11 LM

C Ditto surfaces not exceeding 100mm girth. 151 LM

D Ditto metal surface of the door 23 SM

E Ditto transom. 1 SM
Total WH/23
COLLECTION
Brought forward from page No. SDK/21
Brought forward from page No. SDK/22 -
Brought forward from SDK/23 above. -

Total forElement No. 05 First Floor Doors Carried

SDK/ 24
to Summary
-
ITEM DESCRIPTION QTY UNIT RATE AMOUNT

ELEMENT NO.06.
FINISHES.
FLOORS.
30mm thick cement and sand (1:4) paving screed
A 148 SM
finished with wood float to Terrazzo
C 30mm thick terrazzo paving machine polished 148 SM

20 x 100m high polished terrazzo skirting, rounded

D 177 LM
junction with wall finish and coved junction with floo

Dividing strips PVC 3 x 25mm setting in terrazzo

E 150 LM
(Provisional)

WALLS.

15mm thick,2No.coat work plaster 1:1:6 to

G 106 SM
masonry/concrete surfaces internal steel trowelled.

12mm thick,2No.coat work plaster 1:1:6 to masonry

H - SM
surfaces internal to receive wall tiles.

15mm thick,2No.coat work plaster 1:3 to concrete

J 27 SM
surfaces externally finished with wood float.

Key pointing of dressed natural stone external walling

K 82 SM
along horizontal joints.

Carried forward to Collection

ITEM DESCRIPTION QTY UNIT RATE AMOUNT

CEILINGS.
CEILING FINISHES
Lining
12mm Thick Chipboard ceiling lining on
A 150 SM
brandering(m.s) and set in symmetrical V- joints

B Extra over for trap door size 600 x 600mm

complete 1 NO

Prime grade wrot cypress timber selected and

kept clean

C 75x25mm Cornice with two labours 165 LM

Sawn Cypress

50x50mm sawn cypress brandering nailed to rafters

D 450 LM
(provisional)

E 75 x 50mm Ditto, plugged 150 LM

Painting and decorating Knot, Prime, Stop and

Prepare and apply three coats first quality
emulsion paint

F Surfaces of Softboard 150 SM

G Timber surfaces not exceeding 100mm girth 165 LM

Painting and decorating.

three coats PCA based emulsion paint to Crown
Paint or equal and approved.

B Plastered wall surfaces over 300mm girth internal. 106 SM

D Rendered wall surfaces over 300mm girth external. 27 SM

Carried forward to Collection

Brought forward from SDK/25 above

Brought forward from SDK/26 above
Total for element no 06 first floor finishes carried to
SDK/ 27
summary
ITEM DESCRIPTION QTY UNIT RATE AMOUNT
SUMMARY

FIRST FLOOR WORKS

FIRST FLOOR FRAME FROM SDK/15

FIRST FLOOR BALCONY BALUSTRADES FROM

SDK/16-SDK14 Collection 02

FIRST FLOOR WALLING FROM Element 03

ROOF WORKS SDK/20

FIRST FLOOR WINDOWS FROM SDK 21-SDK/22

FIRST FLOOR DOORS FROM SDK/24

FIRST FLOOR FINISHES FROM SDK/27

TOTAL FOR FIRST FLOOR WORKS CARRIED

TO SUMMARY
ITEM DESCRIPTION QTY UNIT RATE KSHS

PC AND PROVISIONAL SUMS

A. Allow a provisional sum of Kenya Shillings

Four Hundred and FiftyThousand
(450,000.00)
for Mechanical Plumbing internal and
SUM
External icluding worktops and Shelves

B. Allow a provisional sum of Kenya Shillings

Two Hundred and Fifty Thousand
SUM
(250,000.00) for Electrical Works

Allow a Provisional Sum of Kenya Shillings

Three Hundred and Fifty Five Thousand
C for Costruction of Septic Tank to design SUM
and specifications of the Engineer. Kshs.
355,000

Carried to collection

Brought Down from Page No. PC/ 1 Above

TOTAL FOR PC AND PROVISIONAL SUMS

CARRIED TO GRAND SUMMARY

PS/ 1
ITEM DESCRIPTION AMOUNT
GRAND SUMMARY

1 SUB-TOTAL FOR GROUND FLOOR SDK/14 -

3 SUB - TOTAL FOR FIRST FLOOR SDK/27 -

5 PROVISIONAL SUMS PS/1 -

SUB TOTAL -

6 ADD VAT 16% -

TOTAL FOR PROPOSED CONSTRUCTION OF

SATELITE DISPENSARY FOR KAPDENING -
ESTATE - ELDAMA RAVINE SUB COUNTY

NAME OF TENDERER…………………………………………………………….

ADDRESS…………………………………………………………………………….

SIGNATURE…………………………………………………………………………

DATE………………………………………………………………………………….

NAME OF WITNESS………………………………………………………………….

ADDRESS……………………………………………………………………………….

SIGNATURE……………………………………………………………………………

DATE………………………………………………………………………………….
Page No. GS/ 1