Scribd
Upload
556 views4 pages

Concentrating Table Wifley-1

Wilfley Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials. The tried and true concentrators provide for efficient beneficiation and cleanerstage processing in many industries such as mineral sands, precious and base metals. Wilfley Tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication.

Uploaded by

felixsamuelalvarado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
556 views4 pages

Concentrating Table Wifley-1

Wilfley Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials. The tried and true concentrators provide for efficient beneficiation and cleanerstage processing in many industries such as mineral sands, precious and base metals. Wilfley Tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication.

Uploaded by

felixsamuelalvarado
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Wilfley Concentrating Tables

Your Process Benefits


Gravity Separation Shaking Devices


The Wilfley Table method of gravity concentration was developed 70 years ago and has been an important factor in the success of many metallurgical processes. There are many applications where the Wilfley Table is of particular value and cannot be equaled for economical and efficient performance. Wilfley Concentrating Tables are designed to wet gravity-based separation of minerals and other granular materials. The tried and true concentrators, now made with durable modern day materials, are an industry standard that provide for efficient beneficiation and cleanerstage processing in many industries such as mineral sands, precious and base metals.

Precise separation Ability to make a sharp cut High recovery Close control of product grade Riffles and deck form a common surface Adjustable stroke length and speed

Construction and mechanical features

Head Motion
Wilfley Tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication. This feature protects the anti-friction roller bearings, reducing operating and maintenance costs to a minimum. Within this housing is a pitman carried on a forged steel crankshaft and connected through toggles to a yoke. Connected to the yoke are two cold rolled steel bars carried through the housing on brass bushings. This arrangement imparts horizontal motion to the table deck. The entire mechanism is held together by a heavy coil spring under compression, adjustable to compensate for wear of the moving parts.

Decks
Wilfley Table Decks can be supplied in the following composites: 1. Redwood laid diagonally on pine frame 2. Marine ply wood (3/4) on pine frame Both 1 and 2 are supported by steel longitudinal st r i nger s, st r uc t u r a l ste el braces and trusses. Flat steel braces distribute the drawbar pull equally to all parts of the deck minimizing the danger of warping or buckling. 3. Fiberglass decks with gel-coat finish are available for laboratory models.

13B table with sump pump system

Riffles
Riffles are furnished either of selected mahogany or hardwood for wood decks. Many types of riffles have been developed to meet specific problems. Recommendations will be made for your concentration application. Riffles are builtin on fiberglass decks.

Stroke adjustment
By raising or lowering one end of the toggle with an adjusting screw, a variance in stroke length from to 1 can be obtained. Where a shorter stroke is required, a special offset crankshaft can be supplied.

Model 6A 6A 12 13A 13B

Table Description Industrial (Standard) Industrial (Oversized) Half Size Laboratory Pilot Plant

Configurations Available Single X X X X X Double X X Triple x X

Self-locking tilting mechanism


The deck is supported on four bearings carried in rocker pockets that are a part of the tilting beams. A rod with handwheel makes a screw connection with the lower part of the yoke. Through miter gears and shafts, the tilting motion is transmitted evenly through the entire length of the table. The inclination may be varied from zero to one inch per foot.

Feed and Water Box


A wooden feed distributing box with hopper and a long water box are attached to the side of the deck giving a very even distribution of feed and water. Optional fiberglass units are available for the laboratory tables.

Table 1. Model deck configurations

Drives
Available constant speed V-belt motor drive or variable speed motor drive. Special gasoline engine drives can be furnished.

Deck Surface Cover


Option 1 & 2 above: Rubber Option 1 & 2 above: Linoleum Option 3 above: Fiberglass with gel-coat finish. (Lab units only)

Launders
Available in steel with rubber lining for 6A and 12 sizes. Fiberglass for lab units.

Wilfley tables ready to ship

Operating data

Concentrates

Concentrates

No. 10 Finishing Riffle

Tailings Water Water

Standard Riffle

Feed

Feed

General Purpose Riffle

Left-Hand

Right-Hand

Tables are offered in left or right-hand.

Table riffle configurations

Coarse Feed Model 6A (STD) 6A (Oversize) 12 (1/2 Size) 13A (Lab) 13B (Pilot Scale) Stroke Length Range Ins. (mm) 3/4-1 (19-25) 3/4-1 (19-25) 3/8-5/8 (10-16) 1/4-1/2 (6-13) 1/4-1/2 (6-13) Stroke RPM 260-280 260-280 260-300 250-350 250-350 Max. Capacity Lbs/Hr (Kg/Hr) 4000 (1800) 4200 (1900) 1000 (450) 150 70) 250 (115) Stroke Length Range Ins. (mm) 1/2-3/4 (13-19) 1/2-3/4 (13-19) 3/6-5/8 (10-16) 1/4-1/2 6-13) 1/4-1/2 (6-13)

Fine Feed Stroke RPM 300 300 260-300 250-350 250-350 Max. Capacity Lbs/hr (Kg/Hr) 1600 (750) 1800 (800) 400 (180) 100 (45) 200 (90)

Note: Above capacities and operating data apply for most industrial minerals. The capacity of any Wilfley Table varies with the character of the ore, amount of mineral contained, dilution of the feed, and the fineness of the feed. Exclusions are coal and non-mineral reclamation applications such as chopped circuit boards. Table 2. Capacity and operating data

Type of Material Recycled Metals/ Plastics Gold (Free or with Pyrite) Heavy Minerals (Zircon, Rutile, Monazite, etc.) Copper (Sulphides) Zinc (Sulphides) Lead (Sulphides) Tungsten Potash Talc

Recommended Size of Feed 3/8 -35 mesh -20 mesh -28 mesh -20 mesh -48 mesh -20 mesh -1/16 -200 mesh

Suggested Feed % Solids 20 30 25 30-40 17 30 22 Brine Solution 20

Maximum Capacity Tons/Hr 7.0 1.25 1.25 2.0 1.0 1.25 1.0 1.5 0.5

Note: The table lists several types of ores and shows the approximate capacity under average operating conditions when making a final concentrate. For scalping work, the capacities would be considerable increased. Table 3 Applications for single deck tables

I F C H B D G

A
Wilfley table aerial and side view Dimensional Information Ins. (mm) A 144 (3658) 232 (5893) 144 (3658) 70 (1778) 81 (2057) B 60 (1524) 72 (1829) 40 (1016) 14 (356) 20 (508) C 177 (4496) 177 (4496) 92 (2337) 40 (1016) 50 (1270) D 72 (1829) 84 (2134) 46 (1168) 18 (457) 24 (610) E 38 (965) 38 (965) 27 (686) 14 (356) 14 (356) F 108 (2743) 108 (2743) 87 (2210) G 61 (1549) 61 (1549) H 35 (889) 41 (1041) 22 (559) 9 (229) 11 (279) I 29 (737) 29 (737) 27 (686) -

Model

Water Requirements GPM (Liters/Min) 5-20 (19-76) 5-20 (19-76) 3-15 (11-57) 1-4 (4-15) 1-6 (4-23)

HP (KW) 2 (1.5) 2 (1.5) 2 (1.5) 1/3 (0.25) 1/3 (0.25)

Shipping Weight Shipping Volume Lbs. Cu. Ft. (Kgs.) (Cu. M) 3800 (1724) 3980 (1805) 2100 (953) 330 (150) 350 (159) 156 (4.4) 170 (4.8) 97 (2.8) 24 (0.7) 25 (0.7)

6A (Standard) 6A (Oversize) 12 13A 13B

Table 4. Wilfley table specifications and operating requirements

Email: [email protected]

www.outotec.com

Copyright 2007 Outotec Oyj. All rights reserved. Outotec and More out of ore! are registered trademarks of Outotec Oyj.

You might also like