Scribd
Upload
5 views1 page

10 - Válvula Hidráulica 4030200192 Ce LSV Swhps

ISET S.r.l. has issued a certificate to Northman Co. Ltd. for safety valves with positioning switches, allowing the use of the ISET Mark on their products. The certificate outlines the responsibilities for CE marking and compliance with relevant EU directives and standards. It is valid from December 21, 2020, to December 20, 2025, but does not imply any assessment of product safety or compliance.

Uploaded by

Fernando Spanholi Teles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views1 page

10 - Válvula Hidráulica 4030200192 Ce LSV Swhps

ISET S.r.l. has issued a certificate to Northman Co. Ltd. for safety valves with positioning switches, allowing the use of the ISET Mark on their products. The certificate outlines the responsibilities for CE marking and compliance with relevant EU directives and standards. It is valid from December 21, 2020, to December 20, 2025, but does not imply any assessment of product safety or compliance.

Uploaded by

Fernando Spanholi Teles
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ISET S.r.l.

Unipersonale
Sede Legale e Uffici Cap. soc. i.v. € 10.200,00

Via Donatori di sangue, 9 - 46024 Moglia (MN) Cod. Fisc. e P.IVA Reg. Imprese 02 332 750 369

Tel. e fax +39 (0)376 598963 REA 02 332 750 369

www.iset-italia.com [email protected] Cap. soc. i.v. MN 0221098

CERTIFICATE
Certificat - Certificado- Сертификат - Zertifikat - 證書

1) APPLICANT: (who finally puts the product on the market)


Northman.Co.ltd.
No. 73, Dong Hou Industrial Park, Xin Hui District, Jiangmen City, Guangdong Province, P.R. China
2) CERTIFICATE NO.: ISETC.003320201221
TECHNICAL REFERENCE: STUEMO020120820300HS
3) ISET MARK:

4) CAUTION ABOUT CE MARKING (Instruction for the Applicant who puts the product on the EU market):
The label of the CE Marking on the left side should be not less than 5mm height. CE Marking and
EC Declaration of Conformity are duties for the manufacturer or its applicant who puts the product
on the market. This one is responsible to start the CE marking and certification procedure as required
by the legislation in force. Only for the products which are compulsorily included into specific Directives or Regulations
will be necessary to appoint a Notified Body.
5) TYPE OF PRODUCT: Safety valves with Positiong swich
MODEL(S): LSV-16A, LSV-16H, LSV-16E, LSV-16D, LSV-25A, LSV-25H, LSV-25E,
LSV-25D, LSV-32A, LSV-32H, LSV-32E, LSV-32D, LSV-40A, LSV-40H,
LSV-40E, LSV-40D, LSV-50A, LSV-50H, LSV-50E, LSV-50D,
SWHPS-G02, SWHPS-G03, SWHPS-G04, SWHPS-G06
6) LIST OF DIRECTIVES / REGULATIONS /STANDARDS (as declared by the manufacturer itself)
Electromagnetic Compatibility 2014/30/EU
EN IEC 61000-6-1:2019, EN 61000-6-3:2007+A1:2011
7) NOTE: This document is not referred to any evaluation that could be considered as included in the scope of the
activities covered by the standard BS EN ISO/IEC 17065:2012 or European Regulation 765/2008.
8) REMARK: Certificate is issued on voluntary application from the Client and it gives to the applicant the right to
use and affix the ISET Mark on their products, even if it doesn’t imply any assessment on the safety and compliance
of the product. ISET declares that the only scope of the assessment is to verify the existence of the declaration issued
by the manufacturer or an applicant under its own responsibilities.
9) DATE OF ISSUE: 21/12/2020 EXPIRY DATE: 20/12/2025
10) SIGNATURE: Xiao Ming
(On behalf of the Legal representative)

You might also like