PLUMBING BOQ

For, Hotel The Raj Place Jaipur

Rate Amount
S.No. Description Unit
Total Qty. (Rs.) (Rs.)

1 Sanitary Fixtures & C.P. Fittings (Fixing only)

Note:-
Sizes of all Sanitary fixtures given are for identification purpose only and may vary
depending on the makes & models as per final approval of Architect / Client. No
extra cost shall be paid for the same. All Vitreous china sanitary wares, Accessories,
Bath tubs, Kitchen sinks, C.P. brass fittings & accessories as per Annexure I will be
supplied free of cost to the contractor at site. The supply will be made by the
manufacturer/ Vendors as standard supply. Contractor will include providing and
fixing of all other accessories like extension piece, fixing copper pipe for fixtures
connection, any other device / accessories to complete the work under respective
items for the same in the tender. No extra payment on this account shall be made as
per Annexure 1.

1.01 Fixing wall hung type white vitreous china European water closet with concealed `P'
or ‘S’ trap, seat & lid (heavy duty) C.P. brass hinges, including C.I. chair, with chair
grouting, rubber buffers, C.P. nuts, bolts, etc. including accessories CI / Chair
brackets painted with two coats of approved shade over a coat of primer, C.P. Brass
screws and wooden cleats, including cutting and making good the walls & floors
wherever required. Each 19 -

1.02 Fixing of concealed in wall flushing cisterns with dual flushing actuator plate ( plastic
body in approved finish ), flush stop function noise less float valve and fast filling
action with all component parts of high quality complete in all respects. Each 19 -

1.03 Fixing of white viterous china wall mounting / floor mounting type bidet with single
tap hole and CP bolts, nuts and (including providing & fixing hanging arrangements),
32 mm dia CP brass waste, 32 mm dia CP cast brass bottle flange and rubber adapter
for waste connection complete including cutting and making good the walls, floors
wherever required. Each 2

1.04 Fixing white glazed vitreous China wash basin (under / over the counter) with 32
mm dia C.P brass waste of standard pattern, 32 mm dia C.P cast brass bottle trap
and union, 32 mm dia C.P brass pipe to wall and CP wall flange, and rubber acceptors
for waste connection, R.S. or C.I. painted brackets bolts, nuts etc. cutting & making
good the wall and floor wherever required. Gap shall be filled with silicon sealant
where ever required.
a) Oval / round wash basin Each 39 -
b) Flat back wash basin Each 0 -

1.05 Fixing of C.P. Brass single lever basin mixer without poping water with 450 mm long
copper pipe and brass nuts complete including & making good the walls / Floors
wherever required. Each 39 -

1.06 Fixing of 15mm dia C.P. pillar tap for wash basin complete including cutting and
making good the walls wherever required. Each 0 -

1.07 Fixing Stainless steel kitchen sink with R.S. or CI bracket (painted white), 40 mm dia
C.P. brass waste of standard pattern, C.P. brass chain and rubber, 40 mm dia caste
brass bottle trap with necessary union, C.P. pipe to wall & CP wall flange complete
with cutting and making good the walls where required.
a) Double bowl with single drain board. Each 0 -
b) Single bowl without drainboard for Janitor sink Each 6 -

Page 1 of 4
1.08 Fixing Wall Mounted C.P. Brass Sink Mixer single hole / single lever with swinging
casted spout of required size including cutting and making good the wall wherever
required. Each 6 -

1.09 Fixing 6 mm thick bevelled edge plate glass mirror of approved quality with 6 mm
thick marine ply backing fixed to wooden cleats with CP brass screws and washers.
Sq.m 29 -

1.10 Fixing of C. P. Brass single lever concealed mixer 15 mm C.P brass spout & wall
flange (for shower) including necessary fittings/ accessories, cutting & making good
the wall wherever required. Each 14 -

1.11 Fixing of revolving type head shower & shower arm (discharging multiple type of
sets) including cutting and making good the walls / floors wherever required.
a) 1 No. Shower Head Each 14 -
b) 1 No. shower arm including, necessary fittings/accessories, cutting and making good
the wall . Each 14 -

1.12 Fixing recessed type stainless steel toilet paper holder of approved makes. Including
cutting hole in the masonry/R.C.C wall and making good with cement mortar.

a) Size 150 mm x 150 mm Each 19 -

1.13 Fixing CP brass coat hooks (double) of approved make. Including providing & fixing
C.P brass screws, washers, rawl plug etc. Each 19 -

1.14 Fixing liquid soap dispenser of approved make. Including screws, washers and rawl
plug etc. Each 14 -

1.15 Fixing recessed type stainless steel soap tray of approved makes. Including cutting
hole in the masonry/R.C.C wall and making good with cement mortar.
a) Size 150 mm x 150 mm Each 14 -
1.16 Fixing CP brass short body bib cock including, necessary flange, cutting and making
good he walls / floors wherever required complete. Each 0 -

1.17 Fixing CP brass long body bib cock including, necessary flange, cutting and making
good he walls / floors wherever required complete. Each 0 -

1.18 Fixing 15 mm dia C. P. Brass angle valve with C.P. copper connecting pipe , 450 mm
long and nuts & washer with C.P. Brass flange complete including cutting and
making good the Walls / Floors wherever required. Each 0 -

1.19 Fixing CP brass towel ring of size 150 mm dia with screw and rawl plug etc, including
cutting and making good the Walls / Floors wherever required. Each 14 -

1.20 Fixing CP brass air purifier holder fixed to PVC rubber plug with C.P brass screw
complete each. Each 19 -

1.21 Fixing CP towel rod with CP brass bracket of approved make fixed to PVC rawl plug
with CP brass screws, making holes in walls & making good the same. Each 14 -

1.22 Fixing C.P. brass Ablution health faucet assembly comprising hand held shower with
8 mm dia flexible tube with mounting bracket fixed on wall complete. Each 19 -

1.23 Fixing of Cast Iron / Pressed Steel / Acrylic bath tub of standard / large size including
all water supply and waste overflow connections, Cast Brass p/s trap, legs complete
in all respects. Each 14 -

1.24 Fixing , Testing and Commissioning of Bathing faucet for bath tub complete in all
respects :
a) Single lever wall waste assembly
b) Bath Tub spout
c) Overhead shower with arms and wall flanges, complete in all respects. Each 14 -

Page 2 of 4
1.25 Fixing fully automatic "NO TOUCH" stainless steel finish hand drier suitable to
operate on 220 volts, single phase 50 hz, A.C. power supply and directly plugged to
power point complete. Each 14 -

Sub of Total subhead above CO to Summary 0

2 Internal Drainage (Soil, Waste, Vent, Rain water Pipe & Fittings):

2.01 Providing, fixing & testing uPVC SWR pipes confirming to IS 13592 (Type B)
alongwith all required fittings like tees, bends, crosses, Vent Vent Cowel, 'Y' with
or without access doors jointed with approved solvent cement as per
manufacturer's recommendations, fixed to ceilings or Wall with clamps complete
including cutting and making good the floors and walls where required complete
of outer diameter - For Vertical Soil, Waste, Vent and Rainwater

uPVC Pipe & Fitting Type-B/6kg = Applicable as per site requirment

(Ashirvad/Astral/Supreme make)
a) 75 mm dia RM 110 -
b) 110 mm dia RM 180 -
c) 160 mm dia RM 0 -

2.02 Toilet Indirect waste.

a) 40 mm OD RM 60 -
b) 50 mm OD RM 50 -
c) 63 mm OD RM 42 -

2.03 Providing & Fixing of PVC injection moulded SWR floor trap inline with top tile &
strainer having 50 mm water seal as per IS : 14735, including cost of PVC SWR height
raiser to be fixed over floor trap with one inlet of 110 mm. Including cutting &
making good the walls & floors. The jointing shall be done with complete with PVC
solvent cement.
uPVC P-Trap
a) 110 mm inlet & 110 mm outlet Each 3 -

2.04 Providing & Fixing of PVC injection moulded SWR Nani Trap
a) 110 mm dia. Each 34 -

2.05 Providing, fixing, testing & commissioning of uPVC inlet fitting with maximum 3
inlets 40, 50 & 63 OD size, fixed to UPVC traps including jointing complete with all
civil work. Each 3 -

2.06 Providing and fixing floor drain points formed out of Upvc 75mm / 75mm dia elbow
with suitable extension piece, setting in 1:2:4 mix cement concrete block or clamping
to the wall or suspending with the ceiling including cutting and making good the
walls and floors wherever required.
a) 110 mm OD x 75 mm OD Each 16 -
a) 110 mm OD x 50 mm OD Each 29 -

2.07 Providing & fixing 4 mm thick stainless steel grating with rim of approved design
including setting in floor with cement mortar. (For Trap and Floor Drain)
a) 125 mm dia Each 82 -

Sub of Total subhead above CO to Summary 0

Domestic / Flushing / Hot water supply (Internal)

3

Page 3 of 4
3.01 Providing and fixing CPVC (Chlorinated Poly Vinyl Chloride) water supply pipes as per
CTS SDR - 11 at a working pressure of 28 kg/sqcm at 23 deg C and 7 kg/sqcm at 82
deg C, for jointing, using solvent welded CPVC fittings i.e. Tees, Elbows, Couplers,
Unions, Reducers, brushings etc. including transition fittings connection between
CPVC & metal pipe/GI) i.e. Brass Adaptors (both Male & Female threaded)
conforming to ASTM D-2846 with only CPVC solvent cement conforming to ASTM F-
493. All termination points for installation of faucets shall have brass termination
fittings with galvanised angles, channels, clamp, hangers etc, as per specification.
The item include cutting hole in wall, floor, slab and making 7.5 x 7.5 cm chasing in
wall and floors with cutter for GI / Copper / MS / CPVC pipes and fittings & making
good the same by using 1:1 cement mortar. (Concealed or exposed internal exc. in
shaft )

a) 15mm OD RM 0 -
b) 20mm OD RM 840 -
c) 25mm OD RM 260 -
d) 32mm OD RM 40 -
e) 40mm OD RM 0 -
f) 50mm OD RM 0 -
g) 65mm OD RM 0
h) 80mm OD RM RO

3.02 Providing & fixing thermal insulation on hot water pipes a flexible elastomeric foam
of closed cells structure having thermal conductivity of 0.038 W/M.K at 40o C, water
vapour permeability fire propagation including all accessories e.g. adhesive and ape
on joint complete as per specification. All joints shall be sealed with adhesive &
cotton tape.(For concealed pipe)
a) 15 mm [6mm thick insulation] RM 0 -
b) 20 mm [6mm thick insulation] RM 450 -
c) 25 mm [6mm thick insulation] RM 130 -

3.03 Providing & fixing thermal insulation on hot water pipes, a flexible elastomeric foam
of closed cells structure having thermal conductivity of 0.038 W/M.K at 40o C, water
vapour permeability fire propagation including all accessories complete as per
specification. All joints shall be sealed with adhesive & cotton tape, shall be applied
to give uniform appearance & finished with polished protective coating.(For exposed
pipe)
a) 25 mm [9 mm thick insulation] RM 36 -
b) 32 mm [9 mm thick insulation] RM 36 -
c) 40 mm [9 mm thick insulation] RM 0 -
d) 50 mm [9 mm thick insulation] RM 0 -

3.04 Providing and fixing forged brass nickel plated lever operated ball valve of full flow
with forged brass hard chrome plated ball with min. working pressure of 15 Kg/cm2
Lever should be anti rust coating, complete in all respects (For Domestic CWS/FWS
Application).
a) 15 mm dia Each 0 -
b) 20 mm dia Each 25 -
c) 25 mm dia Each 25 -
d) 32 mm dia Each 0 -
e) 40 mm dia Each 0 -
f) 50 mm dia Each 0 -

Sub of Total subhead above CO to Summary 0

Page 4 of 4