Scribd
Upload
1 views1 page

SAE螺纹标准

The document provides specifications for SAE straight thread ports, referencing SAE Standards J1926 and J518. It includes detailed dimensions for various nominal sizes, tube sizes, and thread sizes, along with machining recommendations. Additionally, it notes that sizes –40 and –48 require a bottom tap and are not SAE standards.

Uploaded by

Kelvin Xie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1 views1 page

SAE螺纹标准

The document provides specifications for SAE straight thread ports, referencing SAE Standards J1926 and J518. It includes detailed dimensions for various nominal sizes, tube sizes, and thread sizes, along with machining recommendations. Additionally, it notes that sizes –40 and –48 require a bottom tap and are not SAE standards.

Uploaded by

Kelvin Xie
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

® ®

SAE STRAIGHT SAE information is provided as an aid to designers. For com-


plete specifications refer to SAE Standards J1926 for straight
THREAD PORT thread ports and J518 JUN93 for 4-Bolt flange ports.
DIMENSIONS

FOR BEST RESULTS USE A FORM TOOL TO MACHINE CAVITY


NOMINAL C F
SIZE TUBE THREAD A B* +.015 D E +.005 G H
CODE SIZE SIZE MIN MIN –.000 MIN MAX –.000 MIN ±1°
–2 1/8 5/16-24 .062 .390 .074 .468 .062 .358 .672 12
–3 3/16 3/8-24 .125 .390 .074 .468 .062 .421 .750 12
–4 1/4 7/16-20 .172 .454 .093 .547 .062 .487 .828 12
–5 5/16 1/2-20 .234 .454 .093 .547 .062 .550 .906 12
–6 3/8 9/16-18 .297 .500 .097 .609 .062 .616 .969 12
–8 1/2 3/4-16 .391 .562 .100 .688 .094 .811 1.188 15
– 10 5/8 7/8-14 .484 .656 .100 .781 .094 .942 1.344 15
– 12 3/4 1 1/16-12 .609 .750 .130 .906 .094 1.148 1.625 15
– 14 7/8 1 3/16-12 .719 .750 .130 .906 .094 1.273 1.765 15
– 16 1 1 5/16-12 .844 .750 .130 .906 .125 1.398 1.910 15
– 20 1 1/4 1 5/8-12 1.078 .750 .132 .906 .125 1.713 2.270 15
– 24 1 1/2 1 7/8-12 1.312 .750 .132 .906 .125 1.962 2.560 15
– 32 2 2 1/2-12 1.781 .750 .132 .906 .125 2.587 3.480 15
– 40 ** 2 1/2 3-12 2.344 .750 .132 1.250 .094 3.088 3.875 15
– 48 ** 3 3 1/2-12 2.844 .750 .132 1.250 .094 3.588 4.438 15
**REQUIRES USING A BOTTOM TAP ®
**NOT AN SAE STANDARD. INSERTATM PRODUCTS, ®I STANDARD.

® ® SAE STRAIGHT
THREAD PORT
Blue Bell, Pa. 19422 DIMENSIONS
© 2002 ADACONN® + INSERTA® All rights reserved. Printed in USA www.adaconn.com / www.inserta.com

You might also like