DATASHEET - ZB12-12

Overload relay, ZB12, Ir= 9 - 12 A, 1 N/O, 1 N/C, Direct mounting, IP20

Part no. ZB12-12

Catalog No. 278441
Alternate Catalog XTOB012BC1
No.
EL-Nummer 4131836
(Norway)
Similar to illustration

Delivery program
Product range Overload relay ZB up to 150 A

Product range Accessories

Accessories Overload relays

Frame size ZB12

Phase-failure sensitivity IEC/EN 60947, VDE 0660 Part 102

Description Test/off button

Reset pushbutton manual/auto
Trip-free release

Mounting type Direct mounting

Ir A 9 - 12

Contact sequence

Auxiliary contacts
N/O = Normally open 1 N/O

N/C = Normally closed 1 N/C

For use with DILM7, DILM9, DILM12, DILM15,

DIULM7, DIULM9, DIULM12,
SDAINLM12,
SDAINLM16,
SDAINLM22
DS7-34…SX012…

Short-circuit protection
Type “1” coordination gG/gL A 50

Type “2” coordination gG/gL A 25

Notes

Overload release: tripping class 10 A

short-circuit protective device: Observe the maximum permissible fuse of the contactor with direct device mounting.

Suitable for protection of Ex e-motors.

II(2)G [Ex d] [Ex e] [Ex px], II(2)D [Ex p] [Ex t]

PTB 10 ATEX 3010

Observe manual MN03407005Z-DE/EN.

Notes
Fitted directly to the contactor

11/24/2022 Eaton 278441 ED2022 V93.0 EN 1/6

1 Contactor

Technical data
General
Standards IEC/EN 60947, VDE 0660, UL, CSA

Climatic proofing Damp heat, constant, to IEC 60068-2-78

Damp heat, cyclic, to IEC 60068-2-30

Ambient temperature

Operating range to IEC/EN 60947

PTB: -5 °C - +55 °C

Open °C -25 - +55

Enclosed °C - 25 - 40

Temperature compensation Continuous

Weight kg 0.145

Mechanical shock resistance g 10

Sinusoidal
Shock duration 10 ms

Degree of Protection IP20

Protection against direct contact when actuated from front (EN 50274) Finger and back-of-hand proof

Altitude m Max. 2000

Main conducting paths
Rated impulse withstand voltage Uimp V AC 6000

Overvoltage category/pollution degree III/3

Rated insulation voltage Ui V 690

Rated operational voltage Ue V AC 690

Safe isolation to EN 61140

Between auxiliary contacts and main contacts V AC 440

Between main circuits V AC 440

Temperatur compensation residual error > 40 ºC ≦ 0.25 %/K

Current heat loss (3 conductors)

Lower value of the setting range W 3.9

Maximum setting W 6.9

Terminal capacities mm
2

Solid mm
2 1 x (1 - 6)
2 x (1 - 6)

Flexible with ferrule mm

2 1 x (1 - 4)
2 x (1 - 4)

Solid or stranded AWG 18 - 8

Terminal screw M4

Tightening torque Nm 1.8

Stripping length mm 10

Tools

Pozidriv screwdriver Size 2

Standard screwdriver mm 1x6

Auxiliary and control circuits
Rated impulse withstand voltage Uimp V 4000

Overvoltage category/pollution degree III/3

Terminal capacities mm
2

Solid mm
2 1 x (0.75 - 4)

11/24/2022 Eaton 278441 ED2022 V93.0 EN 2/6

 2 x (0.75 - 4)

Flexible with ferrule mm

2 1 x (0.75 - 2.5)
2 x (0.75 - 2.5)

Solid or stranded AWG 2 x (18 - 14)

Terminal screw M3.5

Tightening torque Nm 1.2

Stripping length mm 8

Tools

Pozidriv screwdriver Size 2

Standard screwdriver mm 1x6

Rated insulation voltage Ui V AC 500

Rated operational voltage Ue V AC 500

Safe isolation to EN 61140

between the auxiliary contacts V AC 240

Conventional thermal current Ith A 6

Rated operational current Ie A

AC-15

Make contact

120 V Ie A 1.5

220 V 230 V 240 V Ie A 1.5

380 V 400 V 415 V Ie A 0.5

500 V Ie A 0.5

Break contact

120 V Ie A 1.5

220 V 230 V 240 V Ie A 1.5

380 V 400 V 415 V Ie A 0.9

500 V Ie A 0.8

DC L/R ≦ 15 ms

Switch-on and switch-off conditions based on DC-13, time constant as specified.

24 V Ie A 0.9

60 V Ie A 0.75

110 V Ie A 0.4

220 V Ie A 0.2

Short-circuit rating without welding

max. fuse A gG/gL 6

Notes
Notes Ambient air temperature: Operating range to IEC/EN 60947, PTB: -5°C to +55°C
Main circuits terminal capacity solid and flexible conductors with ferrules: When using 2 conductors use equal cross-sections.
Rating data for approved types
Auxiliary contacts

Pilot Duty

AC operated B300 at opposite polarity

B600 at same polarity

DC operated R300

Short Circuit Current Rating SCCR

600 V High Fault

SCCR (fuse) kA 100

max. Fuse A 15 Class J/CC

Design verification as per IEC/EN 61439

Technical data for design verification

Rated operational current for specified heat dissipation In A 12

Heat dissipation per pole, current-dependent Pvid W 2.3

Equipment heat dissipation, current-dependent Pvid W 6.9

Static heat dissipation, non-current-dependent Pvs W 0

11/24/2022 Eaton 278441 ED2022 V93.0 EN 3/6

 Heat dissipation capacity Pdiss W 0

Operating ambient temperature min. °C -25

Operating ambient temperature max. °C 55

IEC/EN 61439 design verification

10.2 Strength of materials and parts

10.2.2 Corrosion resistance Meets the product standard's requirements.

10.2.3.1 Verification of thermal stability of enclosures Meets the product standard's requirements.

10.2.3.2 Verification of resistance of insulating materials to normal heat Meets the product standard's requirements.

10.2.3.3 Verification of resistance of insulating materials to abnormal heat Meets the product standard's requirements.
and fire due to internal electric effects

10.2.4 Resistance to ultra-violet (UV) radiation Meets the product standard's requirements.

10.2.5 Lifting Does not apply, since the entire switchgear needs to be evaluated.

10.2.6 Mechanical impact Does not apply, since the entire switchgear needs to be evaluated.

10.2.7 Inscriptions Meets the product standard's requirements.

10.3 Degree of protection of ASSEMBLIES Does not apply, since the entire switchgear needs to be evaluated.

10.4 Clearances and creepage distances Meets the product standard's requirements.

10.5 Protection against electric shock Does not apply, since the entire switchgear needs to be evaluated.

10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.

10.7 Internal electrical circuits and connections Is the panel builder's responsibility.

10.8 Connections for external conductors Is the panel builder's responsibility.

10.9 Insulation properties

10.9.2 Power-frequency electric strength Is the panel builder's responsibility.

10.9.3 Impulse withstand voltage Is the panel builder's responsibility.

10.9.4 Testing of enclosures made of insulating material Is the panel builder's responsibility.

10.10 Temperature rise The panel builder is responsible for the temperature rise calculation. Eaton will
provide heat dissipation data for the devices.

10.11 Short-circuit rating Is the panel builder's responsibility. The specifications for the switchgear must be
observed.

10.12 Electromagnetic compatibility Is the panel builder's responsibility. The specifications for the switchgear must be
observed.

10.13 Mechanical function The device meets the requirements, provided the information in the instruction
leaflet (IL) is observed.

Technical data ETIM 8.0

Low-voltage industrial components (EG000017) / Thermal overload relay (EC000106)

Electric engineering, automation, process control engineering / Low-voltage switch technology / Overload protection device / Thermal overload relay ([email protected] [AKF075014])

Adjustable current range A 9 - 12

Max. rated operation voltage Ue V 690

Mounting method Direct attachment

Type of electrical connection of main circuit Screw connection

Number of auxiliary contacts as normally closed contact 1

Number of auxiliary contacts as normally open contact 1

Number of auxiliary contacts as change-over contact 0

Release class CLASS 10 A

Reset function input No

Reset function automatic Yes

Reset function push-button Yes

Approvals
Product Standards IEC/EN 60947-4-1; UL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CE marking

UL File No. E29184

UL Category Control No. NKCR

CSA File No. 12528

CSA Class No. 3211-03

North America Certification UL listed, CSA certified

Specially designed for North America No

Suitable for Branch circuits

11/24/2022 Eaton 278441 ED2022 V93.0 EN 4/6

Max. Voltage Rating 600 V AC

Degree of Protection IEC: IP20, UL/CSA Type: -

Characteristics

These tripping characteristics are mean values of the spreads at 20 °C ambient air temperature in a cold state.
Tripping time depends on response current.
When the devices are at operational temperature the tripping time of the overload relay falls to approx. 25 % of the read off value.
1: Minimum level, 3-phase
2: Maximum level, 3-phase
3: Minimum marker, 2-phase
4: Highest marker, 2-phase

11/24/2022 Eaton 278441 ED2022 V93.0 EN 5/6

Dimensions

① OFF
② Reset/ON

Additional product information (links)

IL03407015Z (AWA2300-2114) Overload relay

IL03407015Z (AWA2300-2114) Overload relay https://es-assets.eaton.com/DOCUMENTATION/AWA_INSTRUCTIONS/IL03407015Z2021_11.pdf

IL03407195Z Sealable shroud

IL03407195Z Sealable shroud https://es-assets.eaton.com/DOCUMENTATION/AWA_INSTRUCTIONS/IL03407195Z2021_10.pdf

MN03407004Z (AWB2300-1527D/GB) ZB12/XTOB...BC1 and ZB32/XTOB...CC1 overload relays, overload monitoring of Ex e motors

MN03407004Z (AWB2300-1527D/GB) ZB12/ https://es-assets.eaton.com/DOCUMENTATION/AWB_MANUALS/MN03407004Z_DE_EN.pdf

XTOB...BC1 and ZB32/XTOB...CC1 overload
relays, overload monitoring of Ex e motors -
Deutsch / English

11/24/2022 Eaton Industries GmbH 6/6

http://www.eaton.eu
© 07/2022 by Eaton Industries GmbH
Eaton 278441 ED2022 V93.0 EN