Dental Excellence OP 3D Pro

KV_07_17_0043_REV1 © Copyright KaVo Dental GmbH.

in every area. The one for all your needs with
Low Dose Technology™ and five volume sizes.

Practice equipment
KaVo treatment units and lights, dental chairs, patient
communication systems, dental microscope and additional
operatory accessories.

Instruments
Dental straight and contra-angle handpieces, turbines, air
polishing systems and small equipment for all application
areas including diagnosis, prophylaxis, restorative, surgery,
endodontics and instrument care.

Imaging
Intraoral X-ray equipment, sensors and imaging plate systems,
panoramic and cephalometric in combination with CBCT, as well
as dedicated CBCT devices for every indication in dentistry.

CAD/CAM
Dental CAD/CAM solutions for premium aesthetic, natural-
looking and long-lasting restorative work, suitable for
dentists and dental technicians.

The products, features and services shown and described in this catalogue are not available in all countries. All
specifications were correct at the time of publication. KaVo Dental GmbH assumes no liability for deviations in
colour or form from the illustrations, mistakes or printing errors and reserves the right to make changes to the
brochures at any time. Reprinting, even just of excerpts, is only permitted with the consent of KaVo Dental GmbH.

ORTHOPANTOMOGRAPH™, OP™, Low Dose Technology™, CLINIVIEW™ and SmartView™ are either registered
trademarks or trademarks of KaVo Kerr Group Finland in the United States and/or other countries. KaVo™
is either registered trademark or trademark of Kaltenbach & Voigt GmbH in the United States and/or other
countries. All other trademarks are property of their respective owners.

Palodex Group OY | Nahkelantie 160 | FI-04300 Tuusula | Finland

www.kavokerr.com

KaVo Dental GmbH | Bismarckring 39 | 88400 Biberach | Germany

www.kavo.com
The one for all your needs: KaVo
ORTHOPANTOMOGRAPH™ OP 3D Pro.

The image quality of an ORTHOPANTOMOGRAPH™,

combined with KaVo product excellence and maximum
operating comfort: This is the KaVo OP 3D Pro.
High-precision 2D images with multilayer pan function
and V-Shape-Beam Technology. These features
combined with four individual image resolutions in 3D,
five volume sizes, Automatic Dose Control and the
innovative Low Dose Technology make the OP 3D Pro
the ultimate choice for every X-ray indication —
whether it is used as a standard 2D device or as a
3D device; with or without a cephalometric option.

OP 3D Vision

OP 3D Pro

OP 3D

OP 2D

Your benefits at a glance:

General dentists: Oral and maxillary surgery: • Very low radiation doses with
3-in-1 X-ray device for an excellent Tailored volume sizes for the entire Low Dose Technology™
and reliable investment. maxillofacial region. Comprehensive • Maximum flexibility with 5 volume sizes
analysis and planning functions in up to FOV 13x15 cm and 4 resolutions
Endodontists: the X-ray software. • Ability to compensate for incorrect patient
One volume with special endo positioning and difficult anatomies with
resolution and appropriate volume Implantologists: Multilayer feature providing five panoramic
size for the finest structures. 5 different Field of Views with images with only one scan
optimised image quality — from single • Automatically obtaining the most optimum
Orthodontists: implants to a complete set, including panoramic image layer with ORTHOfocus™
The highest image quality for pan- planning of surgical drilling templates. • Simple, intuitive operation thanks to the
oramic and cephalometric exposures. new touch panel user interface
Excellent and adjustable 3D quality • Proven modular concept for maximum
for retinated and impacted teeth. investment reliability

2 | KaVo KaVo | 3
Radiation reduction with Automatic adjustment of the
Low Dose Technology™. radiation dose in exposures.

The innovative Low Dose Technology™ (LDT ) of

the KaVo OP 3D Pro enables optimised quality
in 3D X-ray images with a lower dose of radiation.
For dose sensitive cases in particular, such as
follow-up exposures or exposures of children,
radiation reduction for protecting your patients
represents indispensable added value.

5:1 1:1 ADC for 2D and 3D:

Proprietary ADC technology automatically optimises panoramic and
3D exposure levels for each patient and every acquisition, resulting in
patient-specific dosage and enhanced workflow efficiency.

2D 3D 2D 3D ASC:
Automatic Spine Compensation optimises the image quality through
a dosage adjustment around the spine area.

Panoramic 5 x Ø 5 cm with LDT Panoramic 8 x Ø 15 cm with LDT AFC:

At cephalometric images the Automatic Facial Contour (AFC) decreases
80% less radiation dosage* for a 3D exposure Radiation dose for 3D panoramic 8 x Ø 15 cm exposure factors in the facial soft tissue region to provide improved visibility
(5 x Ø 5 cm, LDT) compared to a 2D panoramic as with 2D panoramic of soft tissue tracing points in addition to a reduction in patient dose.

ORTHOfocus™:
* Study by Ludlow, John B., "Report of Dosimetry of ORTHOPANTOMOGRAPH™ OP300 Maxio," For consistent panoranic image quality the ORTHOfocus™ feature obtains
North Carolina Oral Health Institute, Chapel Hill, NC, USA, February, 2014 optimum image layer automatically — enabling forgiving patient positioning.

4 | KaVo KaVo | 5
Five Field of Views —
multiple possibilities.

For all five volume sizes, you can choose from three image resolutions. 8 x ø 8 cm
For the 5 x Ø 5 cm (6 x Ø 4 cm*) volume, there is an endo resolution
Illustration of both dental arches
available. Each setting provides the perfect resolution in relation to and parts of the maxillary sinuses:
the relevant indication. The five different volume sizes ensure reliable • Planning multiple implants
in both jaws
3D diagnosis throughout the maxillofacial region.
• Drilling templates
• Sinus analysis in children

5 x ø 5 cm (6 x ø 4 cm*) 8 x ø 15 cm
Local diagnostics: Illustration of the upper
• Planning individual implants and lower jaw region:
• Wisdom tooth extractions • Illustration of the
• Retinated teeth sinusitis maxillaris
• With endo resolution for • TMJ diagnosis
high-precision imaging • Upper spinal column
of the canal structures and respiratory tracts
and of the periodontium • "The 3D panoramic"

6 x ø 8 cm 13 x ø 15 cm*
Illustration of one dental arch: Illustration of the entire
• Planning multiple implants maxillofacial region:
in one jaw • Maxillary surgery
• Drilling templates • Orthodontics
• TMJ diagnosis
• Trauma diagnosis
• ENT diagnosis

* In the small panel (SFOV) version of the OP 3D Pro,

only the two volume sizes 6 x Ø 4 cm and 6 x Ø 8 cm are available. * optional function

7 || KaVo
6 KaVo KaVo
KaVo || 87
Integrated programs for
optimised image quality.

Four resolutions. Clearer images Selected programs

with MAR technology. for exceptional diagnosis.

The standard panoramic program provides clear

definition of the dental anatomy including TMJs.
Endo High resolution
For children there is a height and width collimation
program for dosage reduction.

Standard Low-dose Without MAR With MAR

Individually selectable resolutions from low dose to The user-selectable metal artefact reduction (MAR) reduces
standard to high resolution. In the 5 x Ø 5 cm (6 x 4 cm*) the influence of scattered radiation, which emerge on
The Ortho Zone program provides a special geometry
volume, there is also an endo resolution for high-precision high-density structures in X-ray volumes. This optimises
with a broad anterior layer for patients with extreme
imaging of canal structures and the periodontium. the imaging of teeth with filled root canals in particular.
occlusive abnormalities.

Homogeneous images Because 5 is better than 1:

with V-Shape-Beam Technology. Multilayer pan function.
Imaging Programs for lateral and frontal temporomandibular joint
of the sharp
layer (TMJ) exposures with open or closed mouths.

Standard beam V-shaped beam PAN layer selection Normal position Malocclusion

Special program for bite wing-like imaging with specific

A V-shaped beam better considers the different The multilayer pan function supplies five layers with one
segmentation and collimation.
absorption of the human anatomy than a standard beam, exposure with the same scan time and dosage as a single
thus ensuring a homogeneous image presentation. panoramic exposure. The focus area enlarged through
As a result, the structures of the upper jaw are better the five layers reduces the risk of retakes; e.g. in cases
penetrated and the sharply presented layer in the lower with malocclusion.
jaw is significantly broader.

* In the small panel (SFOV) version of the OP 3D Pro,

only the two volume sizes 6 x Ø 4 cm and 6 x Ø 8 cm are available.

8 | KaVo KaVo | 9
From easy to simply self-explanatory. With SMARTVIEW™, you can see before
The new 10.4 inch touch panel. what will be recorded later in 3D.

The operation of the KaVo OP 3D Pro is designed so that all workflows With SMARTVIEW™ functionality FOV positioning accuracy can be verified
are performed intuitively and in a matter of seconds. The clear structure or adjusted if needed before CBCT examination. Furthermore, the FOV
and easy-to-understand symbols make the settings self-explanatory. can be positioned freely to the region of interest, both in horizontal and
Whether it is used for 2D or 3D exposures, the 10.4-inch touch panel vertical directions — with ease and confidence.
enables simple and clear operation, affording operational reliability
and impressive savings in terms of time.

Perfect, free positioning of the volume on the region of SMARTVIEW™ generates two 2D preview
interest is performed directly through the touch panel. images of the region under analysis.

The 10.4-inch touch panel, with its elegant, clear user interface,
supports easy and reliable use.

10 | KaVo KaVo | 11
5-point patient positioining Cephalometric option
for less movement artefacts. for all your clinical needs.

Position exactly and restfully maintain this position: Correct The cephalometric option*, which can be attached on the right or
positioning is confirmed by automatically-operated positioning left hand side of the KaVo OP 3D Pro offers you numerous, varying
laser lights. A rigid 5-point positioning system reduces patient projections: cranial-lateral, AP / PA, cranial-eccentric and Carpus**.
movement. The open product design allows easy viewing and The freely collimatable exposure area reduces the radiation field
positioning of the patient. to the diagnostic requirement of each individual case.

Lateral cephalometric exposures can be generated Posterior/anterior cephalometric image. The

at two different heights and with free width colli- device's earpieces contain markings to ensure
mation between 17 and 26 cm. central positioning.

The secure 5-point positioning system with chin rest, bite block and
headrest, with a forehead and two temple points, reduces patient
movement. Furthermore, the open product design offers you a
first-class overview and enables you to freely position the patient
from either the left or right side.

3-in-1 for maximum flexibility.

The OP 3D Pro is perfectly future-proof owing to its flexible 6 x Ø 8 cm) or medium/large volumes (5 x Ø 5 to 8 x Ø 15 or
configuration options. Purely as a 2D panoramic device, it even 13 x Ø 15 cm). In addition, the cephalometric option can
is ideally suited to general dentistry. In addition, it can be be positioned on either side for optimum use of space and
expanded with small/medium-sized volumes (6 x Ø 4 and enhanced user-experience.

* optional function with one or two sensors

** optional function

12 | KaVo KaVo | 13
The present: full diagnostics. Technical
The future: integrated workflow. specifications.
Focal Spot 0.5 mm, IEC 336 Minimum System Requirements
Tube Voltage 57-90 kV for 3D Acquisition Workstation

Tube Current 3.2-16 mA CPU (processor) Intel Core i5, i7 or Xeon, 4-cores or more
The comprehensive X-ray software CLINIVIEW™ will be installed HU Capacity 35 kJ, 49 000 HU GPU (graphics NVIDIA Quadro M2000 4GB or GeForce

with your new device. For 3D imaging you can choose between Minimum Total Filtration 3.2 mm AI
processing unit) GTX 1050 Ti 4GB
RAM (memory) 8 GB or more
Wheelchair accessible Yes
the 3D diagnostic software OnDemand3D™ or InVivo™ or another. Storage (hard disk) 1 TB or more
RAID 1 or RAID 5 recommended for data
In addition you are already prepared to use the new DTX Studio™* 2D Panoramic Cephalometric
redundancy, plus backup
unifying software platform for 2D and 3D diagnostics, opening Image Detector CMOS CMOS
Network Gigabit Ethernet 1000 Mb/s
Sensor Pixel Size 100 µm 100 µm
Operating System W indows 10 Pro or Enterprise, 64-bit
up a whole new era of digital workflow integration. Image Pixel Size 100 µm 100 µm Windows 8.1 Pro or Enterprise, 64-bit
Scan/Exposure Time 8.6-16.1 s 10-20 s Windows 7 Professional, Ultimate or
Image Field Height 148 mm 170 mm–260 mm Enterprise, 64-bit, with SP1

The proven and well known CLINIVIEW™ software Windows and Mac operating systems, the DTX Studio™ Imaging Programs Standard, Paediatric, Ortho Zone, Orthological, Wide Display 1920 x 1080 resolution (Full HD) or
Arch, Lat TMJ, PA TMJ, Maxillary Sinus, Bitewing higher, at least 300 cd/m2 brightness
already stores its data compatible to the new DTX Studio™ platform will integrate both existing and future devices
for typical room lighting, native
Weight 200 kg/440 lbs 250 kg/551 lbs
software platform. Your office will already be prepared as well as current software provisions into one unified contrast ratio 100:1 or better, 8-bit
to take advantage of a future constant stream of new working process. CLINIVIEW™ is prepared to support a panel strongly recommended
3D OP 3D Pro small panel OP 3D Pro
enhancements that will cover all fields of modern smooth transition into the new future and step by step Other OpenCL 1.1 support
Image Detector CMOS CMOS DVD-ROM drive
dentistry and dental technology. Compatible with opens new possibilities you may never had expected.
Image Voxel Size 85 µm-330 µm 85 µm-420 µm Anti-virus software
Scan Time 11-21 s 11-42 s
Exposure Time 1.2-12.6 s 1.2-8.7 s
CLINIVIEW™. OnDemand3D™. DTX Studio™. Image Volume Sizes 61x41, 61x78 mm 50 x 50, 61 x 78, 78 x 78,
(HxW) 78 x 150, 130 x 150 mm
2D X-ray software. 3D X-ray software. Uniform workflow. DICOM* Support Yes Yes

* DICOM is the registered trademark of the National Electrical Manufacturers Association

for their standard publications on the digital exchange of medical data.

Dimensions.
79˝(200.5 cm)
(cephalometric can be installed on the left or right)
min. 21.7˝ (55 cm) min. 21.7˝ (55 cm)
recommended recommended
Screen with panoramic image. Screen with Dental view. Screen with tooth workspace.
(GUI can be installed
on the left or right
side as shown.)
CLINIVIEW™. InVivo™. DTX Studio™.

54.5˝ - 56.1˝ (138.5 – 142.5 cm)

2D X-ray software. 3D X-ray software. Flexible integration.

Chin rest 35.4˝ - 69.2˝ (89.8 – 175.8 cm)

Min. room height: 80.1˝ - 96.5˝

63.4˝ - 95˝ (161.0 – 241.0 cm)

(205 – 245 cm)

38˝ (96.5 cm)
Screen with intraoral images. Screen with MPR view. Screen with intraoral workspace.

* Installations possible as soon as DTX Studio™ platform is available in your region. 38˝ (96.5 cm)

14 | KaVo KaVo | 15