[A3zz1UV PRINTER]

catalogues

●Tips......................................................................................................................................-1-

●Safety warning.....................................................................................................................-2-

●Packing List.........................................................................................................................-3-

●Introduce the UV Printer A3ZZ1UV...............................................................................-4~5-

●What should you do before turn on the printer first time......................................................-6-

●How do operate software to print.........................................................................................-7~8-

●How do add ink for the printer..............................................................................................-8-

●What should you do before print first picture ......................................................................-9~10-

●Precautions and Daily maintenance...................................................................................-10~11-

●Guarantee Range and Customer Registration....................................................................-12-

 TIPS

Thanks for you bought “A3ZZ1UV”printer！

Thanks for your recognition and support to us, please read this operation document, it will help you to use the
equipment more successfully

statement：
As the performance of the product increases, the contents of this instruction manual are subject to change
without notice. No part, any modification, or translation of this manual may be reproduced by any unit,
organization, otherwise the company will not be held liable.

Any loss or personal injury caused by the operator's violation of one of the following terms shall be borne by the
user.
1. The operator did not perform all the losses caused by the operation of “warning”, “attention” and
“important matters” as emphasized in the operating instructions;
2. All losses and personal injuries caused by the operation of minors;
3. Loss and personal injury caused by improper placement of the equipment, falling sideways;
4. The operator will improperly place the consumables and cause loss and personal injury;
5. Fire and personal injury caused by all illegal power and circuit connections;
6. This product is not guaranteed to be compatible with all types of computers and operating systems, and may
cause losses when using this device for this reason;

-1-
 Safety Warning
Safety Precautions：Please read this instruction manual carefully.，Must follow the instructions carefully to
operate universal printer for prevent the machine damage and people damage,If you haven't followed the steps
in operation manual to cause the machine damage and we will not provide warranty
【！】警告
Failure to follow these instructions may result in personal injury or equipment damage due to incorrect operation.
In order to make better use of this printer, please be aware of these warnings.
【！】注意
Failure to follow these instructions may result in personal injury or equipment damage due to incorrect
operation. In order to operate safely and use a universal printer, be sure to pay attention to these notes.
Important matters
Failure to follow these instructions may result in personal injury or equipment damage due to incorrect operation.
In order to operate safely and use a universal printer, be sure to pay attention to these important matters.

【！】警告
Where is the printer position?
□ Avoid placing it where the temperature and humidity are subject to drastic changes. Also, the printer should
be protected from direct sunlight, glare, or heat. Direct light exposure can cause loss of function of the printer
sensor.
□ Avoid places where dust is easily contaminated, causing electric shock and vibration.
□ Place enough space around the printer to ensure adequate ventilation and to ensure proper operation of the
front and back of the printing platform.
□ Place the printer on a stable, stable work surface that extends beyond the printer's base in all directions.
□ If the printer is placed at an angle or at an angle, the printer will not work properly.
□ Place the printer close to the power outlet and make sure the power plug is easily removed.
□ Do not place the printer near magnets or devices that contain magnets.

【！】注意
How do choose the power supply
□Use only the type of power supply described in the relevant parameters of this manual. An incorrect power
supply voltage can cause a fire or electric shock.。
□Use only the power cord that came with your printer. Using other power cords may cause fire or electric shock。
□Do not use a broken power cord. Otherwise, machine damage or casualties will occur.。
□Do not plug or unplug the power cord with wet hands.。
□The plug must be fully inserted into the power outlet。
□The power outlet to which the printer is connected has a qualified ground wire configuration. If the user's area
does not have a qualified bottom line configuration, please connect the ground wire manually.
Important matters
When using the printer
□Do not put your hand into the printer or touch other moving parts while the printer is working。
□Do not attempt to repair the printer yourself without the guidance of a professional。
□Be careful not to spill liquid on the printer, especially on accessories that have electrical and signal
transmission。
□Make sure the interface is connected correctly when using a cable to connect the printer to the computer。
□Do not perform any operations on the printer while the printer is booting to perform a self-test.。

-2-
 □Please do not plug or unplug the printer cable (USB) while the printer power is on.。
Thanks for your recognition and support to us, please read this operation document, it will help you to use the
equipment more successfully

(一) Packing List

Please open the packing cases after you received machine,clean up the protective film, check the
machine whether have road damage, whether have ink spillover, and make an inventory according to the
packing list

1. One set RF-A3zz1 Flatbed Printer

2. One set CISS(already installed on the printer)
3. Two ink sac（spare parts）
4. One USB and one USB key [ Rip dog](for printer driver, softwa re and so on )
5. Five sets syringes, it is used for filling ink, also used to suction the air of the pipeline after the
machine used a while
6. ONE network line（function: connect the computer and printer）
7. A number of screw
8. one power line
9. Two sensor(spare parts)
10. One set ink
11. two screwdriver
12. Two tube

-3-
 (二)Introduce the UV Printer-RF-A3ZZ1UV
The Flatbed Printer is a kind of ink-jet printing type high-tech digital printing equipment which works object
non-contact , its application field is very wide, it is a technical innovation in hand painting, all kinds of transfer
printing, screen printing technology. Use UV ink,except T-shirt, applicable nearly all kinds of material and picture
can be directly color printed by this machine, such as:Phone shell、Leather、Glass、Label 、Metal、Crystal、
KT Board、Acrylic、PVC、ABS、EVA、Plastic、Mobile Power、Stone、U disk、Silica gel and the other materials,
after printing , the printout is very resistance to wear、scrape、alcohol scrub、waterproof、fade-resistant. It really
realize the true sense of one piece print up, no plate-making, namely spray is dry, full color image completely

Limit indutor
The print head

UV water-cooled box Print tray

Display screen

Printer Power switch

UV LED switch 升降平台

up/down platform

Display screen

Check nozzle in the platform

Print stop Up the platform

Clean nozzle
the print head to
The print head to right left
Down the platform
-4-

Out the platform Homing the print head

 Total power switch：Give printer power
Print power switch：Used to start the printer(Press in an emergency)
Print tray：Used to place the materials that need printed
Infrared ray (Limiting stopper) ：The print objects can’t is higher than limiting stopper ,just pass is no
problem ，when the print tray just can pass the infrared ray ,also don’t far between the nozzle and print material ,
otherwise the picture will fuzzy
Ink bottle holder：fix the waste bottle here
UV Ink tube：Please insert each pipeline to the corresponding ink bottle according to the label of the pipeline
Waste ink pipe ：There will be ink overflow while the printer do head cleaning
Cartridge Holder：used to put the ink bottle.
UV Ink tube

Network line interface Cartridge Holder

Waste ink tube Total power switch

Power interface

Ink bottle holder USB interface：

Used for connecting printer and
computer
Power interface：
Up/down platform
Used to connect the power cord
power switch：
Network interface Used to turn on or turn off the total
machine
Up/Down switch：
Used to adjust the height of the print
tray，the max height is 20cm
Technical parameters：
UV LED switch：
Printer type：RF-A3ZZ1UV
Turn on the button when printing
Equipment size：860*780*640mm Packing size：890*800*760mm
UV water-cooled box：
Gross /Net Weigh：83KG 78KG
Use pure water to lower UV lamp
Image size：33*600mm
temperature
Max Print DPI：720*1440dpi Ink Consumption：15-2 ㎡
Object thickness：20cm
Ink Color：Y/K/LC/LM/M/C
Height adjustment：Electric adjust, limited height

Characteristic as following：
● Applicable nearly all kinds of material and picture can be directly spray printed
● Without plate-making, with the characteristics of time saving and economy, fast proofing and high efficency

-5-
● The biggest spray printing thickness of the material is about 8cm., you can adjust the thickness freely
● Uneven materials (uneven within 2mm) can also directly spray printing
●Stable performance, repeat print does not shift, humanized appearance design , simple operation and easy
maintenance
● Use UV ink, except T-shirt, applicable nearly all kinds of material and picture can be directly color printed by
this machine
● It is very suitable color printing on Phone shell、Leather、Glass、Lables、Metal、 Crystal、KT Board、Acrylic、
PVC、ABS、EVA、Plastic、Mobile Power、Stone、U disk、Silica gel and the other materials
● UV INK has white ink, it can print on dark color materials, it makes up the disadvantage that ordinary machine
with solvent ink can only printing light color materials
Some UV Print Sample：

plastic metal glass leather tile golf CD wood

(三) What should you do before turn on the printer first time
一、Check the parts according to the packing list
After you receive the goods,please open the packing cases, clean up the winding protective-film,check if
there is damage during long distance transport, and whether have ink spillover。
一、Machine Self-Checking
Check if the print tray is located in the rear position of the machine(where there is power jack), turn on the
“Total power switch” and “Printer power switch”, the printer will be in self-checking process, this moment the
Printer Power switch light will flash red, print head move right and left, self-checking be finished while it is in
long red light state, the machine is in normal state
Add full of water for the
water box

enough space

Insert the power line and then turn After press the printer power
Check whether there is enough space.
on the total power button button ,the printer will be
the enough space is used to moving
checked automatucall,it need
the tray
some time
Note: 1、every day, you must make the machine be self-checking before it start working, then it can begin printing
normally

三.Install the printer driver

Find the driver for RF-A3ZZ1UV printer(Printer diver)(print software)，install the corresponding program
according to the hints， then use USB to connect computer and printer, the computer will identify the
printer automatically.Insert the rip dog ，open the software。（please see the video to install the
driver and software）
-6-
 Attention:

Make sure the starting printer

was compelete before you

1.connect the computer and operate the printer

2.insert the network line to
printer with USB line and port
insert the key

（四）How to use software to print picture

一. Operate the RIPrint software(The software only recognize TIF and JPG format So the picture
must be converted to TIF format）
1.How to print the picture

2.Click“import”“open the 3..Click (Original size) and then

1.Click“new”
TIF picture click OK,(you will see pop-up the
window after import the picture )

4. you can adjust size and 5.Click (spot color) and then 6.Click“print ”“Select
direction for picture from here select none in data source type (720x1440-16pass- 单 头
and select single dot mode in 4C-2Bit) in solution and
halftoning type Select (TCPIP) in send type
and then Click “finish”

-7-
 二.How to operate the printexp software：
1.Open the printExp software

1.The X margin and the Y margin is to 2.The “normal” means is that together jet white 3.if you have adjusted it, Click
adjust the original printing position ink and color ink “save”
The “only color” means is that only jet color
ink
The “only white” mean is that only jet white ink

attention：
when you used the machine first time, Please note the height between the nozzle and something
you need to print,

（五）How to add ink for the printer

1.Get all the ink 2.Put these tubes in 3.see if the ink tube at 4. Find the "Clean 5.See whether
bottle. Make two in all bottles and put the bottom , if the ink strong" in the clean the waste bottle

holes for each them on according tube is not at the bottom and click it , the have ink come in

bottle but only bottle ,note: the two the air will go to the steps needs repeat after you clicked

white ink bottle white tube just need tube, twice. “Clean strong”,if
makes three holes one white bottle. nothing you need
click again

Remarks:
If you need to transport the machine, please take out the ink sac, and lift it up, then take out the waste ink pipe
from the waste ink bottle , using syringe to draw the ink sac and ink pipe out, then make the end of the pipe bend, in
order to avoid the ink spillover and dirty the machine
You must make sure the ink sac and ink pipe empty, if you don’t suction it empty, the ink will back flow, the
machine will be very dirty in this condition transport
-8-
 (六) What shoul you do before print first picture

一．The RF-A3ZZ2UV machine nozzle self-clean and check

1、Nozzle cleaning
first time added ink for the new printer and it will has had phenomena of color mixture，first need to clean for
nozzle then the ink will been corrected in the nozzle, when you have do nozzle check how to check picture:
（After you used the machine a long time，if the printout/nozzle check picture is brake line phenomenon，the
means is lack color and need clean the nozzle. ）
Clean nozzle：Open the PrintExp software and like below the picture：

Select“Clean”-“2 head all” When the printer is self-clean and

“clean weak” the waste ink that was used
The nozzle will be cleaned .
to clean the nozzle will come
attention: in the waste ink from waste
you must have finished the fifth step tube while the printer is
before do this step cleaning.
二、Nozzle/printout check picture：
1、Move the tray to the front，Stick A4 paper in lower right corner of the tray later ,and then adjust the height of the
tray(When you add ink to the new printer , the nozzle checking maybe have a result that each color ink is
mixed，so you need to clean the nozzle, you can see below the content that how to clean the nozzle:），In the
end,print a calibration chart，（see below the picture）

Here
托盘

1. Stick paper on the tray with 2. move the something you need to 3. move the print head above the
some tape，(the paper must keep print below the nozzle (like above something you need to print(like
2、
flat for prevent collision accident) the picture) above picture)

5.The best distance is about

2-3mm between the nozzle and 6.After have adjusted the distance,please
4.Adjust the tray goes up
something you need
- 9to
- print press the "homing print head"button
 7.as soon as press the “nozzle” 8. The printing has was finish and 9. Check whether the nozzle was
button,the nozzle will print a the tray will be removed out mixture color or lack of line
checking picture.

attention：
Please note the height between the noozle and the something you
need to print while you use the printer, if the checking picture is break
you can press the clean to clean the nozzle , then print a nozzle checking
again.

（七）Precautions and Daily maintenance

一、UVprinter can print almost everything except T-shirt, you need do pre-coating first when print glass、metal
二、After the machine use a while,if the print color is not normal, at this point, it is ne cessary for you to
do print nozzle test to see if the nozzle test is normal, if not, please do head cleaning.
三、CISS Ink bottle must be putted on the “Cartridge Holder”,too high or too low position is not good,it
will cause high pressure.the level of the ink must lower than the print head,otherwise the ink will leak out
from the print head

Please cleaning waste ink regularly

四、Special attention matters when printing

(A) Make sure the print tray is located in the rear position before printing, let the machine be ready for printing
(B) When the Print tray is in processing, please don’t drag, otherwise, it will can't normally print.
(C) After finish printing task, make sure there is no any other printing task, then you can take out the material
(D) Make sure the flat surface of the print tray don’t touch the “Limit board”
五、 Every time we only can release one print command,if the machine don’t print correctly, you need to cancel
the print task and release the new print command.
五、 Adjust the height of the print tray
六、 Different material has different thickness,we should adjust the height of the print tray by press”up/down
Switch”. The best print quality is that the distance between the material and the head is 2mm, must avoid too
high, otherwise it will damage print head, nor less than 3mm, too low position will affect the image. We had
helped you adjust the limited board before we send the cargo out. It is the best height to be printed objects from
the nozzle, when the print tray just can pass the limit board

You can adjust the print height of the print tray by “up/down button” freely, the scope of the height

- 10 -
 adjustment is between 0-20cm

七、 In order to reduce resistance, you had better add sewing machine oil on the track that the print head move
back and forth,otherwise it will happen flash red when start the machine ;
What’s more,we should add oil on the track that to make the print tray go through, if the track resistance is
big,the tray will not move, it will affect the print precision too

八、Because the white ink is easy to precipitate,it is best for customer to shake the white ink for several minutes
before using the machine everyday. If you don’t use the machine for a long time ,please shake the white ink for
several minutes and suction the white ink from the ink sac again(the way please see “Suction Ink”),the ink that
suction out can put back into the bottle and continue use,after suction the ink,you should do head cleaning again.

九、The UV ink will curing when come across the UV-light, so please don’t lay the machine on the place where
can be shined directory.

十、 Attention of choosing picture

1、 No matter the pictures download from the Internet or the customer offer, you must make sure the clarity of the
picture, poor clarity will cause poor print quality. Generally speaking,it is only more than 300dpi can you get good
quality.
2、 When we need to print pictures,it is best for us to design the picture the same size as material printed by
Photoshop (or AI), please don’t directly modify the size in the RIPrint, otherwise the picture will widen or
lengthen, the picture will be disproportionately.
3、 You can learn the basic operation of PS software on the Internet
PS study website:http://www.duote.com/tech/photoshop/

十一、 Check the water tank regularly: please check wheter the water is enough in the water box once a month,:
十二、

1. Check the boxt 3: add the water in the 4：you can use syringe to 6：put the cap back on
2. take off the cap
water box add water, the added
water is about 90% of
water box

（八） Guarantee Range and Customer

Registration
- 11 -
 guarantee range:
1、 Because the machine in the application must use special ink, so the print head only guarantee in good
condition when you buy. After using the machine,all man-made damage and the following terms and conditions
such as the nozzle blocking, pumps and accessories corrosive or cleaning nozzle in a wrong way lead to the
main board burned are outside the scope of free warranty.

2、The Scope of the warranty: One year warranty except CISS, cleaning unit, printer head or damage by
human,the cost of double-way transportation will be responsible by yourself.

3、 When you receive the goods,please read the instructions carefully(be familiar with the product’s part
name),so that we can communicate more easily in time when you come across problems.

After read the operate manual, please contact the seller for guidance immediately if something you don’t
understand.

Our company will not deal with it if customers call seller directory but didn’t read the instructions or don’t
familiar with the name of the product components first.

If because of buyers don’t understand and do not contact seller first but mishandled, or unauthorized
disassembling machines, the buyer will assume all the Consequences hims

Please enter information to blank space ,so that we can track the information and provide
good after-sales service.
Equipment purchase date
Equipment type
Ink type
Name of purchaser
Shipping address
Contact phone
Contact QQ
Contact Wechat / Whatsapp
Machine Malfunction

- 12 -