(6001CJA10102123012) *6001CJA10102123012*

(Academic Session : 2023 - 2024)

TARGET : JEE (M + A) : 2024

ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2

Time : 3 Hours Maximum Marks : 300

Student's Form No. : ..................................................................... Batch : ..........................................

Student's Name : .........................................................................................................................................

Important Instructions :
1. Immediately fill in the form number on this page of the Test Booklet with Blue/Black Ball Point Pen. Use of pencil is strictly prohibited.
2. The candidates should not write their Form Number anywhere else (except in the specified space) on the Test Booklet/Answer Sheet.
3. The test is of 3 hours duration.
4. The Test Booklet consists of 90 questions. The maximum marks are 300.
5. There are three parts in the question paper 1, 2, 3 consisting of Physics, Chemistry and Mathematics having 30 questions in each subject
and each subject having Two sections.
(i) Section-I contains 20 multiple choice questions with only one correct option.
Marking scheme : +4 for correct answer, 0 if not attempted and –1 in all other cases.
(ii) Section-II contains 10 Numerical Value Type questions. Attempt any 5 questions. First 5 attempted questions
will be considered for marking.
Marking scheme : +4 for correct answer, 0 if not attempted and –1 in all other cases.
6. Use Blue/Black Ball Point Pen only for writting particulars/marking responses on Side–1 and Side–2 of the Answer Sheet. Use of pencil is strictly
prohibited.
7. No candidate is allowed to carry any textual material, printed or written, bits of papers, mobile phone any electronic device etc, except
the Identity Card inside the examination hall/room.
8. Rough work is to be done on the space provided for this purpose in the Test Booklet only.
9. On completion of the test, the candidate must hand over the Answer Sheet to the invigilator on duty in the Room/Hall. However, the candidate
are allowed to take away this Test Booklet with them.
10. Do not fold or make any stray marks on the Answer Sheet.
Topic :
Magnetism + Terrestrial Magnetism Electromagnetic Induction (1.0 To 11.0)
PHYSICS
SECTION-I : (Maximum Marks: 80) 3. A cylindrical space of radius R is filled with a
This section contains 20 questions. Each question has 4 uniform magnetic induction B parallel to the axis of
options for correct answer. Multiple-Choice Questions the cylinder. If B changes at a constant rate, the
(MCQs) Only one option is correct. For each question, graph showing the variation of induced electric
marks will be awarded as follows: field with distance r from the axis of cylinder is
Full Marks : +4 If correct answer is selected.
Zero Marks : 0 If none of the option is selected.
Negative Marks : –1 If wrong option is selected.
1. Two long conducting, fixed, parallel rails are lying
in a region having uniform magnetic field,
perpendicular to the plane of the rails. Two (A) (B)
identical sliders of mass m and resistance R each
(initially at rest) can slide over the rails. If one of
the slider is given velocity v0, the velocity of the
other slider after considerably long time will be
(C) (D)
(Ignore friction):

4. A long conductor AB lies along the axis of a

circular loop of radius R. If the current in the
conductor AB varies at the rate of I ampere/second,
v0 v0 then the induced emf in the loop is
(A) v0 (B) zero (C) (D)
2 4
2. A metallic rod of length ℓ is rotated in a horizontal
plane with angular velocity ω where no magnetic
field exists. The EMF induced in the rod is (mass
of e – is m and charge of electron is e)

2 2 2 (A) μ 0 IR (B) μ 0 IR (C) μ 0 π /R (D) Zero

(A) mℓ ω2 (B) mω ℓ (C) mω ℓ (D) mω2 ℓ2 2 4 2
e 2e 2e e
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 1/15

5. Small loop of side length ‘b’ is placed at the centre 7. Figure shows a uniform magnetic field B confined
of a big square loop, of side a (a >> b) then mutual to a cylindrical volume and is increasing at a
inductance of system is: constant rate. The instantaneous acceleration
experienced by an proton placed at P is

(A) zero (B) towards right

2
(A) μ 0 2√2b2 (B) μ 0 4b (C) towards left (D) upwards
πa πa
2 μ 0 b2 8. There exists a uniform but time varying magnetic
(C) μ 0 2b (D) field B = a + bt normal to plane of paper in a
2πa √ 2πa
6. Four identical long solenoids A, B, C and D are cylindrical region of radius ‘R’ as shown. A
connected to each other as shown in the figure. If rectangular conducting loop is placed as shown.
the magnetic field at the center of A is 3T, the field Induced emf in branches AB and BC are :
at the center of C would be : (Assume that the
magnetic field is confined with in the volume of
respective solenoid).

(A) π R2b/2, 0 (B) 2R2b, 0

(A) 12T (B) 6T
(C) 0, π R2b/8 (D) 0, π R2b/4
(C) 9T (D) 1T

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 2/15 Space for Rough Work English / 13092023

9. A line charge ( λ per unit length) is in the form of 11. In a coil of resistance 100 Ω , a current is induced
circular wheel of radius 'a' and moment of inertia by changing magnetic flux through it as shown in
is I, initial at rest. It is free to rotate in a horizontal figure. The magnitude of change in flux through
plane. There is a coaxial magnetic field B = B0 k^ coil is
extending upto a radius b(b < a). If the magnetic
field is switched off, the angular velocity ' ω ' of the
wheel is given by :

2
(A) π a b λ B clockwise as seen from above (A) 200 Wb (B) 225 Wb
I
(C) 250 Wb (D) 275 Wb
(B) π ab2 λ B
clockwise as seen from above
I 12. A bar magnet having a magnetic moment of 1.0 × 104
(C) π ab2 λ B J/T is free to rotate in a horizontal plane. A horizontal
anticlockwise as seen from above
2I magnetic field B = 4 × 10 – 5 T exists in the space. The
(D) π ab2 λ B work done in rotating the magnet slowly from a
anticlockwise as seen from above
I direction parallel to the magnetic field to a direction
10. The loop of wire shown in figure rotates with 60° from the field will be :-
constant angular speed ω about the x-axis. A
(A) 0.2 J (B) 0.1 J
uniform magnetic field B→ whose direction is along
+ve y – axis. At t = 0 the plane of loop is in xz plane (C) 0.4 J (D) 0.3 J
as shown. In which time interval the induced
current in the loop is from P to Q?

(A) π to
π
(B) 0to
π
2ω ω 2ω
(C) π to 2 π (D) never
ω ω
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 3/15

13. Four small identical bar magnets each of magnetic 15. The real angle of dip, if a compass needle is kept in
dipole moment M are placed on vertices of a square a vertical plane at an angle of 30° to the magnetic
of side a such that diagonals of the square coincide meridian and in this plane, needle makes an angle
with perpendicular bisectors of respectively magnets. of 45° with horizontal, is
The net magnetic field at the centre of the square is :- √3
(A) tan−1 ( ) (B) tan−1 (√3)
2

√ 3 2
(C) tan−1 ( ) (D) tan−1 ( )
√ 2 √ 3
16. The magnitude of the earth's magnetic field at a place
is B0 and the angle of dip is δ . A thin horizontal
conductor of length ℓ lying along the magnetic
μ0 M north-south moves eastwards with a velocity v. The
(A) 0 (B) 3 emf induced across the conductor is :
√ 2π a
(A) Zero (B) B0 ℓ v sin δ
(C) 2 √2 μ 0 M
. (D) μ 0 . M
π a3 π a3 (C) B0 ℓ v (D) B0 ℓ v cos δ
14. If the B-H curves of two samples of P and Q of iron
17. A bar magnet is dropped along the axis of a
are as shown below, then which one of the following
conducting coil kept in horizontal plane. What
statements is correct ?
would be its acceleration ?
(A) g downwards
(B) Greater than g downwards
(C) Less than g downwards
(D) Bar will be stationary
(A) Both P and Q are suitable for making
18. The magnetic susceptibility of a paramagnetic
permanent magnet
substance is 3 × 10−4 . It is placed in a magnetising
(B) P is suitable for making permanent magnet field of 4 × 104 A/m. The intensity of magnetisation
and Q for making electromagnet will be :-
(C) P is suitable for making electromagnet and Q (A) 3 × 108 A/m (B) 12 × 108 A/m
is suitable for permanent magnet
(C) 12 A/m (D) 24 A/m
(D) Both P and Q are suitable for making
electromagnets
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 4/15 Space for Rough Work English / 13092023

19. The reduction factor of tangent galvanometer is 'K'. SECTION-II : (Maximum Marks: 20)
If the radius of coil is made half and number of This section contains 10 questions Candidates have to
turns is doubled, then its value of reduction factor attempt any 5 questions out of 10. If more than 5
becomes :- questions are attempted, then only first 5 attempted
K (B) K questions will be evaluated.
(A)
2 4 The answer to each question is a NUMERICAL VALUE.
(C) 2K (D) 4K For each question, enter the correct numerical value (If
20. Needles N1, N2 and N3 are made of a the numerical value has more than two decimal places,
ferromagnetic, a paramagnetic and a diamagnetic truncate/round-off the value to TWO decimal places; e.g.
substance respectively. A magnet when brought 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is
close to them will 11.36777..... then both 11.36 and 11.37 will be correct)
by darken the corresponding bubbles in the ORS.
(A) Attract N1 and N2 strongly but repel N3 For Example : If answer is –77.25, 5.2 then fill the
(B) Attract N1 strongly, N2 weakly and repel N3 bubbles as follows.
weakly
(C) Attract N1 strongly, but repel N2 and N3
weakly
(D) Attract all three of them

Answer to each question will be evaluated according to

the following marking scheme:
Full Marks : +4 If correct answer is selected.
Zero Marks : 0 If none of the option is selected.
Negative Marks : –1 If wrong option is selected.

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 5/15

1. If earth's magnetic field is assumed due to a short 3. The square loop has sides of length 2cm. A
bar magnet placed at its center, then angle of dip magnetic field points out of the page and its
can be measured with direction of magnetic field magnitude is given by B = (4t2y) T. Emf induced in
with surface. Then angle of dip at latitude loop is given by x μ V at t = 2.5 s. Find the value
10
λ = tan−1 (0.5) is π . Find value of α . of x.
α

4. A loop of area 0.04 m2 with 100 turns is kept in a

magnetic field perpendicular to plane of coil
depending on time as B = 4 sin2t. What is value of
2. In the given figure the magnetic flux through the loop maximum emf induced in the loop ? (B is in tesla
increases according to the relation ϕ B(t) = 10t2 + 20t, and give your answer in M.K.S)
where ϕ B is in milliwebers and t is in seconds. The 5. A circular loop of area 10 cm2 and resistance 4 Ω is
magnitude of current through R = 2 Ω resistor at t = 5 s rotated in a magnetic field B = 2T through 180° in
is ____ mA. 20s as shown in figure.

If magnitude of amount of charge flown in circular

loop in that interval is x µC then find value of x.
6. A semicircular loop of radius r is placed on the axis of
a current carrying circular ring of radius R (R >> r), at
a distance 3 R from the centre of the ring. The plane
√

of the loop is making an angle of 53° with the plane of

the ring. If the coefficient of mutual induction
3 μ 0 π r2
between them is , find n.
16 × nR

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 6/15 Space for Rough Work English / 13092023

7. A circular coil of radius 8.0 cm and 20 turns is 9. Relation between permeability μ and magnetising field
rotated about its vertical diameter with an angular 0.4
H for a sample of iron is μ = ( + 12 × 10−4 )
speed of 50 rad s – 1 in a uniform horizontal H
magnetic field of 3.0 × 10 – 2 T. The maximum emf Henry/meter, where unit of H is A/m. Find value of H
induced the coil will be ............. × 10 – 2 volt for which magnetic induction of 1.0 Wb/m2 can be
(rounded off to the nearest integer). produced
8. An iron rod of volume 10-4m3 and magnetic 10. The magnetic moment produced in a substance of
susceptibility 1000 is placed inside a long solenoid 1g is 6 × 10−7 Am2 . If its density is 5 g/cm3, then
wound with 5 turns/cm. If a current of 0.5 A is the intensity of magnetisation (in A/m) will be :
passed through the solenoid, then the magnetic
moment of the rod in (Am2) is :

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 7/15

Topic : Solid States,Liquid Solutions
CHEMISTRY
SECTION-I : (Maximum Marks: 80) 5. The number of atoms in 100 g of a FCC crystal
This section contains 20 questions. Each question has 4 with density = 10.0 g/cm3 and cell edge equal to
options for correct answer. Multiple-Choice Questions 200 pm is equal to :
(MCQs) Only one option is correct. For each question, (A) 5 × 1024 (B) 5 × 1025
marks will be awarded as follows:
(C) 6 × 1023 (D) 2 × 1025
Full Marks : +4 If correct answer is selected.
Zero Marks : 0 If none of the option is selected. 6. Lithium forms body centred cubic structure. The
Negative Marks : –1 If wrong option is selected. length of the side of its unit cell is 351 pm.
Atomic radius of the lithium will be :
1. In a lattice of X and Y atoms, if X atoms are present
at corners and Y atoms at the body centre & one (A) 75 pm (B) 300 pm
X atom is removed from a corner from each unit (C) 240 pm (D) 152 pm
cell, then the formula of the compound will be :
7. A metal crystallises in a face centred cubic
(A) X7Y (B) X8Y7 structure. If the edge length of its unit cell is 'a', the
(C) X7Y8 (D) X7Y7 closest approach between two atoms in metallic
crystal will be :
2. If x = radius of Na+ & y = radius of CI – & a is the
unit cell edge length for NaCI crystal, then which (A) 2 √2 a (B) √ 2a
of the given relation is correct ? (C) a
(D) 2a
(A) x + y = a (B) 2x + 2y = a √ 2
8. Which type of 'defect' has the presence of cations
(C) x + y = 2a (D) x + y = √2a
in the interstitial sites ?
3. An ionic compound is expected to have tetrahedral (A) Frenkel defect
r+
structure if lies in the range of: (B) Metal deficiency defect
r−
(A) 0.155 to 0.225 (B) 0.732 to 0.414 (C) Schottky defect
(C) 0.414 to 0.732 (D) 0.225 to 0.414 (D) Vacancy defect
4. In face-centred cubic unit cell, edge length is :
4 4
(A) r (B) r
√ 3 √ 2
(C) 2r (D) √ 3
r
2
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 8/15 Space for Rough Work English / 13092023

9. In a face centered lattice of X and Y, X atoms are 12. Mole fraction of C3H5(OH)3 in a solution of 36 g
present at the corners while Y atoms are at face of water and 46 g of glycerine is :
centers. Then the formula of the compound would (A) 0.46 (B) 0.36
be if one of the X atoms is missing from a corner in
each unit cell (C) 0.20 (D) 0.40
(A) X7Y24 (B) X24Y7 (C) XY24 (D) X24​Y​ 13. Insulin (C2 H10 O5 )n is dissolved in a suitable
solvent and the osmotic pressure of the solution of
10. Given an alloy of Cu, Ag and Au in which Cu various concentration (in kg/m3) is measured at
atoms constitute the CCP arrangement.If the 20°C. The slope of a plot of π against c is found to
hypothetical formula of the alloy is Cu4Ag3Au. be 8.314 × 10−3 (SI units) The molecular weight of
What are the probable locations of Ag and Au the insulin (in kg/mol) is :
atoms.
(A) 4.8 × 105 (B) 9 × 105
(A) Ag - All tetrahedral voids; Au - all octahedral
voids (C) 293 × 103 (D) 8.314 × 105

(B) Ag - 3/8th tetrahedral voids; Au - 1/4lh 14. Density of 1M solution of a non-electrolyte C6H12O6
octahedral voids is 1.18 g/mL. If Kf (H2 O) is 1.86∘ mol−1 kg, solution
freezes at :
(C) Ag -1/2 octahedral voids; Au -1/2 tetrahedral
voids (A) −1.58∘ C (B) −1.86∘ C

(D) Ag - all octahedral voids; Au - all tetrahedral (C) −3.16∘ C (D) 1.86°C
voids 15. Mole fraction of a non-electrolyte in aqueous
11. Zinc sulphide exists in two different forms-zinc solution is 0.07. If Kf is 1.86∘ mol−1 kg, depression
blende and wurtzite. Both occur as 4:4 co- in freezing point., Δ Tf is :
ordination compounds. Choose the correct option (A) 0.26° (B) 1.86°
from among the following :
(C) 0.13° (D) 7.78°
(A) Zinc blende has a bcc structure and wurtzite
an FCC structure 16. Which has maximum freezing point ?

(B) Zinc blende has an fee structure and wurtzite (A) 6g urea solution in 100 g H2O
an hcp structure (B) 6g acetic acid solution in 100g H2O
(C) Zinc blende as well as wurtzite have a hcp (C) 6g sodium chloride in 100 g H2O
structure (D) All have equal freezing point
(D) Zinc blende as well as wurtzite have a
FCC structure
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 9/15

17. The vapour pressure of a pure liquid A is 40 mmHg SECTION-II : (Maximum Marks: 20)
at 310 K. The vapour pressure of this liquid in a This section contains 10 questions Candidates have to
solution with liquid B is 32 mmHg. Mole fraction attempt any 5 questions out of 10. If more than 5
of A in the solution, if it obeys Raoult's law is : questions are attempted, then only first 5 attempted
(A) 0.8 (B) 0.5 questions will be evaluated.
The answer to each question is a NUMERICAL VALUE.
(C) 0.2 (D) 0.4
For each question, enter the correct numerical value (If
18. What will be the molecular weight of NaCI the numerical value has more than two decimal places,
determined experimentally from elevation in the truncate/round-off the value to TWO decimal places; e.g.
boiling point or depression in freezing point 6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is
method ? 11.36777..... then both 11.36 and 11.37 will be correct)
(A) < 58.5 (B) > 58.5 by darken the corresponding bubbles in the ORS.
For Example : If answer is –77.25, 5.2 then fill the
(C) = 58.5 (D) None of these
bubbles as follows.
19. Azeotropes are :
(A) Liquid mixtures which distil unchanged in
composition
(B) Liquids which can mix with each other in all
proportions
(C) Solids which form solid solutions of definite
compositions
(D) Gases which can be separated Answer to each question will be evaluated according to
the following marking scheme:
20. The vapour pressure of two pure liquids A and B, Full Marks : +4 If correct answer is selected.
that form an ideal solution are 100 and 900 torr Zero Marks : 0 If none of the option is selected.
respectively at temperature T. This liquid solution Negative Marks : –1 If wrong option is selected.
of A and B is composed of 1 mole of A and 1 mole
of B. What will be the pressure, when 1 mole of
mixture has been vapourized ?
(A) 800 torr (B) 500 torr
(C) 300 torr (D) None of these

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 10/15 Space for Rough Work English / 13092023

1. In aqueous solution of 1 × 10−3 molal Kx F e(CN)6
[ ] 5. The co-ordination number of calcium fluoride
depression in freezing point 7.2 × 10−3 K . Determine (CaF2) type structure is a & b. Find a + b
sum of primary and secondary valency of complex 6. How many nearest neighbours surround each ion in
(Kf of H2 O = 1.8 K Kg/mole . (Assume that %
)
rock salt type ionic crystal ?
ionisation of complex is 100%)
7. Body-centred cubic lattice has a coordination
2. How many of the following solutions show number of:
negative deviation from Raoult's Law ?
Liquid A + Liquid B 8. How many number of tetrahedral voids are
completely inside the HCP unit cell.
(i) (CH3 )2 CO + CS2
9. 8 × 10−x moles of gas A is dissolved in 36 ml of
(ii) CCl4 + C 6 H6 water when pressure of gaseous mixture above
water is 4 atm. Mole percentage of gas A in
(iii) CCl4 + CHCl3
mixture is 25. Henry constant for gas A in water is
(iv) H2 O + C2 H5 OH 2.5 × 103 atm. Find x.

(v) (C2 H5 )2 O + (CH3 )2 CO

10. Calculate molarity of final solution obtained by
mixing I and II HNO3 solution.
(vi) CH3 COOH + C5 H5 N (pyridine) I II

(vii) C6 H5 NH2 + (CH3 )2 CO %w

w 12.6 6.3

(viii) C6 H5 Cl + C6 H5 Br d (in g/mL) 1.5 1

(ix) Cyclohexane + Ethanol V olume (in L) 5 5

3. The % vacant space in B.C.C. unit cell is :
4. In 3D close packed structures, for every 100 atoms,
number of octahedral voids will be:

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 11/15

Topic : Application Of Derivative
MATHEMATICS
SECTION : I : (Maximum Marks: 80) 5. The function x2 log x in the interval (1, e) has
This section contains 20 questions. Each question has 4 (A) A point of maximum
options for correct answer. Multiple-Choice Questions
(B) A point of minimum
(MCQs) Only one option is correct. For each question,
marks will be awarded as follows: (C) Points of maximum as well as of minimum
Full Marks : +4 If correct answer is selected. (D) Neither a point of maximum nor minimum
Zero Marks : 0 If none of the option is selected.
6. log x
Negative Marks : –1 If wrong option is selected. Local maximum value of the function is
x
1. The point of the curve y 2 = 2(x − 3) at which the (A) e (B) 1 (C) 1 (D) 2e
normal is parallel to the line y − 2x + 1 = 0 is e
7. If two sides of a triangle be given, then the area of
7
(A) (5,2) (B) ( , 1) the triangle will be maximum if the angle between
2
the given sides be
7
(C) (5, – 2) (D) , −1)
(A) π (B) π (C) π (D) π
(
2
3 4 6 2
2. The normal of the curve x = a(cos θ + θ sin θ )
8. The values of ‘a’ for which the function
y = a(sin θ − θ cos θ ) at any θ is such that
(a + 2)x3 − 3ax2 + 9ax − 1 decreases monotonically
(A) It makes a constant angle with x-axis throughout for all real x, are
(B) It passes through the origin (A) a < −2 (B) a > −2
(C) It is at a constant distance from the origin (C) −3 < a < 0 (D) − ∞ < a ⩽ −3
(D) None of these 9. If f(x) = 2x + cot−1 x + log( √
1 + x2 − x), then f(x) is
3. The angle between curves y 2 = 4x and x2 + y 2 = 5 (A) Decreases in [1, ∞ )
at (1, 2) is
(B) Decreases in [0, ∞ )
(A) tan−1 (3) (B) tan−1 (2)
(C) Neither increases nor decreases in (0, ∞ )
(C) π (D) π
2 4 (D) Increases in (− ∞ , ∞ )
4. For the curve xy = c2 the subnormal at any point 10. The length of the longest interval, in which the
varies as function 3 sin x – 4 sin3x is increasing, is
(A) x2 (B) x3 (C) y2 (D) y3
(A) π (B) π (C) 3 π (D) π
3 2 2
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 12/15 Space for Rough Work English / 13092023

11. The function f(x) = x(x + 3)e−(1/2)x satisfies all the 16. If the Rolle's theorem holds for the function
conditions of Rolle's theorem in [ – 3, 0]. Then f(x) = 2x3 + ax2 + bx in the interval [−1, 1] for the
value of c is 1
point c = , then the value of 2a + b is:
2
(A) 0 (B) −1
(A) 2 (B) −2
(C) −2 (D) −3
(C) −1 (D) 1
12. The sum of all the local minimum values of the 17. If (a, b) be the point on the curve y = x2 − 4x + 3
∣ ∣
∣ ∣
twice differentiable function f : R → R defined by which is nearest to the circle
3f ′ ′ (2)
f(x) = x3 − 3x2 − x + f ′ ′ (1) is: x + y 2 − 4x − 4y + 7 = 0, then (a + b) is equal to -
2
2
(A) −22 (B) 5 (A) 7 (B) 3
4
(C) −27 (D) 0 (C) 0 (D) 2
13. If the tangent to the curve, y = f(x) = xlogex, (x > 18. Let f : S → S where S = (0, ∞ ) be a twice
0) at a point (x, f(c)) is parallel to line - segment differentiable function such that f(x + 1) = xf(x). If
joining the point (1, 0) and (e, e), then c is equal to: g : S → R be defined as g(x) = loge f(x), then the

(A) 1
(B)
1 value of g ′ ′ (5) − g ′ ′ (1) is equal to:
∣
∣ ∣
∣
e
( )
1−e
e−1
(A) 205 (B) 197
(C)
1
(D) e−1
e
(
e−1
)
144 144
e
(C) 187 (D) 1
14. The tangent to the curve, y = xex2 passing through 144
the point (1, e) also passes through the point: 19. If the surface area of a cube is increasing at a rate
4 of 3.6 cm2 / sec, retaining its shape; then the rate of
(A) ( , 2e) (B) (2, 3e)
3 change of its volume (in cm3 / sec), when the length
5 of a side of the cube is 10 cm, is:
(C) ( , 2e) (D) (3, 6e)
3
(A) 9 (B) 18
15. The maximum value of the function
3 2 (C) 10 (D) 20
f(x) = 3x − 18x + 27x − 40 on the set
S = {x ∈ R : x2 + 30 ⩽ 11x} is: 20. The function f(x) = cos x − 2px is monotonically
decreasing for:
(A) 122 (B) −222
1 1
(C) −122 (D) 222 (A) p< (B) p>
2 2
(C) p<2 (D) p>2

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Space for Rough Work Page 13/15

 SECTION : II : (Maximum Marks: 20) 3. The minimum value of the function 2 cos 2x − cos 4x
This section contains 10 questions Candidates have to in 0 ⩽ x ⩽ π is P then the absolute value of P is
attempt any 5 questions out of 10. If more than 5 4. If ab = 2a + 3b, a > 0, b>0 then the minimum
questions are attempted, then only first 5 attempted value of ab is
questions will be evaluated.
5. Let f : [−1, 1] → R be defined as
The answer to each question is a NUMERICAL VALUE. 2
f(x) = ax + bx + c for all x ∈ [−1, 1], where a, b,
For each question, enter the correct numerical value (If
c ∈ R such that f(−1) = 2, f ′ (−1) = 1 and for
the numerical value has more than two decimal places,
truncate/round-off the value to TWO decimal places; e.g. x ∈ (−1, 1) the maximum value of f ′ ′ (x) is 1 . If
2
6.25, 7.00, –0.33, –.30, 30.27, –127.30, if answer is f(x) ⩽ α , x ∈ [−1, 1], then the least value of α is
11.36777..... then both 11.36 and 11.37 will be correct) equal to ______.
by darken the corresponding bubbles in the ORS. 6. Let f(x) be a cubic polynomial with
For Example : If answer is –77.25, 5.2 then fill the f(1) = −10, f(−1) = 6, and has a local minima at
bubbles as follows. x = 1, and f ′ (x) has a local minima at x = −1.
Then f(3) is equal to ______.
7. A wire of length 36 m is cut into two pieces, one of
the pieces is bent to form a square and the other is
bent to form a circle. If the sum of the areas of the
two figures is minimum, and the circumference of
4
the circle is k (meter), then ( + 1) k is equal to
π
_______.
Answer to each question will be evaluated according to
the following marking scheme: 8. The largest area of the rectangle whose base is on
Full Marks : +4 If correct answer is selected. the x-axis and two of its vertices lie on the curve
2
Zero Marks : 0 If none of the option is selected. y = e−x is λ then find the value of e. λ 2
Negative Marks : –1 If wrong option is selected. 9. The set of all values of a for which the function
x
1. In the mean value theorem, f(b) − f(a) = (b − a)f ′ (c) f(x) = a2 − 3a + 2 cos + (a − 1)x possesses critical
( )
2
if a = 4, b = 9 and f(x) = x then the value of c is
√ points is (− ∞ , a] ∪ {b} ∪ [c, ∞ ) when a, b, c ∈ I then
2. Maximum slope of the curve y = −x3 + 3x2 + 9x − 27 a + b + c is equal to
is 10. The three sides of a trapezium are equal each being
6 cm long, then the area of trapezium when it is
maximum is λ then find the value of λ .
√ 3
JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

Page 14/15 Space for Rough Work English / 13092023

 SPACE FOR ROUGH WORK

JEE(M+A) ENTHUSIAST (WD-EVE & W-END BATCH) P - 1 & 2_IT-06 6001CJA10102123012

English / 13092023 Page 15/15