Sr.No. Questions Ans.

Before using electrical hand tool, _________

1 A. Check the ON/Off button B. Wear rubber hand gloves D
C. Check the certificate tag D. All of the above
Which of the following can cause Physical Hazard?
2 A. Fall from height B. Electricity D
C. Inhalation D. All of the above
Which colour used for radiation hazard?
3 A. Purple B. Red A
C. Orange D. Green
Which safety activity to be performed before starting
shift?
4 C
A. Take work permit B. Gathered at office
C. Conduct Tool Box Talk D. Report to supervisor
Which precaution required while using welding
machine?
5 D
A. Cable insulation B. Earthing
C. Competency of the
welder D. All of the above
Why should regular safety inspection required at
workplace?
A. To check everyone B. To check all staff members
6 D
doing their job well are present
C. To check the worker's D. To check working
competency environment safe
Defensive Driving is ________
7 A. An attitude about driving B. A way to drive fast A
C. Not required at all times D. required by law
CPR means____________
A. Cathode Proton Ransom B. Cathode Protection Ray
8 D
D. Cardio Pulmonary
C. Critical Phase Reaction Resuscitation
World Steel Safety Day is observed World wide on
_________
9 C
A. 4th March B. 5th June
C. 28th April D. 5th september
In case of emergency siren, ___________
A. Gather at assembly
10 A
point B. Informed to supervisor
C. Informed to co-workers D. Stay at your working place
How can you contribute a positive safety culture at
workplace?
A. Complete your work B. Report unsafe conditions to
11 B
Safely concern person
C. Report SAM & NM
regularly D. All of the above
Work at Height Permit is mandatory at Essar Steel for
the jobs above_________?
12 A
A. 2 meter B. 1.5 meter
C. 2.5 meter D. 3 meter
Which of the following safety precaution require at
moving machine parts?
13 A. Instruction of shift B
incharge B. Guards
C. PPEs D. Awareness

Who is Authorized person to give signal to the Crane

Operator?
14 D
A. Engineer B. Site supervisor
C. Technician D. Certified Rigger

Which type of Permit is mandatory for Electrical work?

15 A
A. Lock Out Tag Out B. Cold work permit
C. Height permit D. Hot work permit
Best tool to improve HSE Culture is __________
16 A. Wear PPEs B. Awareness Session C
C. BBS D. Conduct Tool Box Talk
Full form of SOP __________
A. Safe operate person B. Standard Operate person
17 C
C. Standard Operating
Procedure D. Safety Operating Process
 Which is best suited type of Fire Extiguisher for
extinguishing oil or flammable liquid fire?
18 A
A.Foam B. DCP
C. Vaporizing liquid D. CO2
Which of the following tag indicates that scaffold is
certified?
19 B
A. Red B. Green
C. Yellow D. White
If you observe exposed wires you should
A. Wrap them in tape B. Cut the wires to prevent a fire
20 D
C. Warn others and report
it to a concern Supervisor D. Both A & C
The aim of Safety Action Memo (SAM) and Near Miss
(NM) reporting system is to:
21 C
A. Fault finding B. Accident analysis
C. Prevent accidents D. Safety Participation
Flashback arrester required in __________
22 A- Welding Machine B-Grinder C
C-Gas Cutting Set D-Cutter
What is mandatory thing to access confined
space/vessel entry?
23 D
A.Take Work Permit B. Check O2 level
C. Conduct TBT D. All of Above
Work permit required in which of the following job?
24 A. To operate any machine B. Crane Maintenance B
C. To operate the crane D. Manual Scrap handling
Which of the following parameters consists as Fire
triangle?
25 C
A. Heat,Wood,Oil B. Coal,Wood,Oxygen
C. Heat,Fuel,Oxygen D. Oil,Air,Petrol
What is the speed limit defined for two wheelers and
four wheeler inside Essar Steel premises?
26 A
A. 30 km/hr B. 35 km/hr
C. 20 km/hr D. 25 km/hr
What is a hazard?
A.The likelihood of
27 something going wrong B. Incident waiting to happen C
C. Anything with the
potential to cause harm D. Safety Action Plan
For Confined space entry the minimum limit of Oxygen
shall be___________
28 B
A. 17 % B. 19.5 %
C. 21 % D. 20.5%
Permit acceptor shall be responsible for__________
A.Safety of persons B. Ensure use of required and
29 performing the jobs need base PPEs D
C. Adopt safe method of
working D. All of the above
What is the emergency contact number of Fire Control
Room in AMNS India?
30 A
A. 2222 B. 2300
C. 2666 D. 2323
Which of the following Safety PPE required during
welding job?
31 D
A.Nose mask B. Rubber Hand gloves
C. Ear Plug D. Face Shield
Decibal is an unit used to measure___
32 A.Light B.Noise B
C.Frequency D. Velocity
World Environment Day celebrated world wide on
33 A. 5th June B. 5th October A
C. 28th April D. 4th March
The following safety gears are used as safety device in
machinaries
34 D
A. Safety interlocks B. Limit switches
C. Machine Guards D. All of the above
Class-A fire occures due to___
35 A. Oil B. Transformer C
C. Wood D. Chemical
Which type of protection you will use in a space where
O2 level is very less ?
36 B
 A.Oxygen cylinder B. SCBA
C. Filter mask D. Face shield
which of the following is used for chemical hazard
information?
37 A. Warning sheet B. Chemical awareness C
C. Material Safety Data
Sheet D. General safety data sheet
If electrial wires & appliances are overheated due to
high electric current can cause _________
38 C
A. Fires B. Burns
C. Both a and b D. Freezing
The effect of an electric shock on the body depends
upon one exception, that is__________
39 B
A. Duration B. Weight
C. Path D. Current
Which of the following statement is not correct ?
A. Electricity travels in a B. Electricity tries to travel to
40 ground D
complete circuit
C. Electricity takes the path D. Electricity always travel to
of lease resistance ground
If the capacity of EOT Crane is 12 T, capacity of hook is
10 T and capacity of sling is 15 T, then what could be
41 the safest load lifted? A
A. 8 T B. 11 T
C. 12 T D. 15 T
How many Safety Mandates available in System of
Essar Steel?
42 B
A. 10 B. 11
C. 12 D. 13
Hazardous Gas/Chemicals consists -
43 A. LEL B. UEL D
C. STEL D. All of the above
Which are the two main causes of incidents at work
place?
A.Unsafe m/c and unsafe B. Unsafe people and unsafe
44 C
condition act
C. Unsafe act and Unsafe D. Unsafe people and unsafe
condition m/c
Fire occurred due to short circuit, which class of FE
would be used?
45 C
A. Class A FE B. Class B FE
C. Class C FE D. Class D FE
Good Housekeeping for safe industrial sites, Except -
B.Providing containers for the
A.Keeping sites reasonably
collection of waste, trash and
dry & clear of debris, scrap
46 oily rags D
C. Removing combustible
materials from the D. Storing all flammable wastes
workplace in a barrel
Work Place injuries, illness & penalties resulted into
losses. What is the most practical way to manage these
losses?
47 A.Make sure safety is part A
B. Good Insurance coverage
of labour control
C. Aggressive claims D. Arrange lost control
handling programme
Industrial Safety Management is consist of_______
Total
48 D
A.Reducing B. Controlling Marks Obtained ______ out of 50
C. Eliminating D. All of the above
Indirect cost of accident is directly proportionate to
_________
A. Compensation paid to B. Money paid for treatment of
49 C
worker worker
C. Cost of lost time of
injured worker D. All of the above
What is the last line of action to reduce the hazard
50 A. PPEs B. Engineering control A
C. Eliminate D.Substitution
Note: Each question carries 02 marks. Total Marks Obtained ____ out of
100
Full form of SOP __________
A. Safe operate person B. Standard Operate person
51 C
 C. Standard Operating
Procedure D. Safety Operating Process
Which is best suited type of Fire Extiguisher for
extinguishing oil or flammable liquid fire?
52 A.Foam B. DCP A

C. Vaporizing liquid D. CO2

If you observe exposed wires you should
A. Wrap them in tape B. Cut the wires to prevent a fire
53 D
C. Warn others and report
it to a concern Supervisor D. Both A & C
Defensive Driving is ________
54 A. An attitude about driving B. A way to drive fast A
C. Not required at all times D. required by law
World Steel Safety Day is celbrated World wide on
_________
55 C
A. 4th March B. 5th June
C. 28th April D. 5th september
In case of emergency siren, ___________
A. Gather at assembly
56 A
point B. Informed to supervisor
C. Informed to co-workers D. Stay at your working place
Before using electrical hand tool, _________
57 A. Check the ON/Off button B. Wear rubber hand gloves D
C. Check the certificate tag D. All of the above
Which of the following can cause Physical Hazard?
58 A. Fall from height B. Electricity D
C. Inhalation D. All of the above
Which safety activity to be performed before starting
shift?
59 C
A. Take work permit B. Gathered at office
C. Conduct Tool Box Talk D. Report to supervisor
Which precaution required while using welding
machine?
60 A. Cable insulation B. Earthing D
C. Competency of the
welder D. All of the above
Which HSE System enhanced employees awareness
A. Hazard & Risk
61 D
Assessment B. Job Safety Analysis
C. Follow the SOPs D. All of the above
What is the L.E.L. of Ammonia ?
62 A. 14% B. 16% B
C. 20 % D. 22 %
What is the speed limit of heavy vehicles in essar steel
premises ?
63 A
A. 20 km/hr B. 25 km/hr
C. 30 km/hr D. 15 km/hr
Which are the two main causes of incidents at work place
A.Unsafe m/c and unsafe B. Unsafe people and unsafe
64 condition act C
C. Unsafe act and Unsafe D. Unsafe people and unsafe
condition m/c
Fire occurred due to short circuit, which class of FE would
be used?
65 C
A. Class A FE B. Class B FE
C. Class C FE D. Class D FE
Good Housekeeping for safe industrial sites, Except?
B.Providing containers for the
A.Keeping sites reasonably collection of waste, trash and
dry & clear of debris, scrap oily rags
66 D
C. Removing combustible
materials from the D. Storing all flammable wastes
workplace in a barrel
Work Place injuries, illness & penalties resulted into losses.
What is the most practical way to manage these losses?
A.Make sure safety is part
67 B. Good Insurance coverage A
of labour control
C. Aggressive claims D. Arrange lost control
handling programme
Which analysis method is the most effective at determining
potential problems in a given system
68 B. Failure mode effective B
A. Job Safety Analysis Analysis
C. Fault tree Analysis D. Preliminary Hazard Analysis
Industrial safety management branch is concerned
with_______
69 D
A.Reducing B. Controlling
C. Eliminating D. All of the above
Indirect cost of accident_________
A. Compensation paid to B. Money paid for treatment of
70 worker worker C
C. Cost of lost time of
injured worker D. All of the above
What is the last line of action to reduce the hazard
71 A. PPEs B. Engineering control A
C. Eliminate D.Substitution
Decibal unit used to measure___
72 A.Light B.Noise B
C.Frequency D. Velocity
The following are used as safety device in machines
73 A. Safety interlocks B. Limit switches D
C. Machine Guards D. All of the above
The following are generally provided with limit switch to
prevent motion beyond limit
75 D
A. Hoists B. Machine tools
C. Conveyors D. All of the above
Class-A fire consists of fire due to___
76 A. Oil B. Transformer C
C. Wood D. Chemical
____is best suited to extinguishing oil or flammable liquid
fire
77 A
A.Foam B. DCP
C. Vaporizing liquid D. CO2
Which phenomenon can lead to the creation of an explosion
hazardous area ?
78 B
A. Fire clouds B. Dust clouds
C. N2 clouds D. Steam clouds
Which type of protection do you use in a space with little O2
?
79 B
A.Oxygen cylinder B. SCBA
C. Filter mask D. Face shield
Following which is used for chemical hazard information
80 A. Warning sheet B. Chemical awareness C
C. MSDS D. General safety data sheet
____gloves provides reflective and insulating protection
against heat
81 A
A.Alluminized B. Cotton
C. Rubber D. Leather
What is legal requirement to establish a new plant ?
82 A. Assembly point B. Ambulance point D
C. PSSR D. All of the above
Eye wash station should be installed within ___feet of
hazardous locations
83 A
A.25 B.20
C.35 D. 30
If elect. Wires & appliances are overheated due to high
elect. Current can cause
84 C
A. Fires B. Burns
C. Both a and b D. Freezing
The effect of an electric shock on the body depends upon
all of the following, Except
85 B
A. Duration B. Weight
C. Path D. Current
Colour marking for oxygen cylinder is
86 (a) Black (c) Purple
(b) White (d) Green A
Which colour signifies neutral wire in electric circuit ?
87 (a) Green (b) Yellow
(c) Black (d) Blue C
A barrier placed along the edge of the scaffold platform and
secured there to guard against the falling of material and
88 equipment is known as________
a) Guard Rail c) Transom
 b) brace d) ToeBoard D
Any excavation in the ground where the depth of the
excavation exceeds the width is known as______
89
a) Sheathing c) Strut
b) Cleat d) Trench D
As per AMNS Fatality Prevention Standard, for lines rated
50 kV or below the minimum clearance between the lines
90 and any part of the crane or load shall be
a) 2m c) 3 m
b) 1.5m d) None of the above C
As per AMNS Fatality Prevention Standard, to prevent
fatigue during driving maximum daily driving time on site :
91
a) 9 hours c) 12 hours
b) 8 hours d) 4 hours C
As per AMNS Fatality Prevention Standard, any pit or
trench with a depth equal to or greater than ___________ is
92 classified as a permit-required confined space .
a) 3 feet c) 2 feet
b) 4 feet d) 6 feet A
As per AMNS Fatality Prevention Standard, maximum
validity of the Confined space entry certificate shall be for :
93
a) 8 hours c) 24 hours
b) 12 hours d) 48 hours C
As per AMNS Fatality Prevention Standard, continuous
and/or Periodic monitoring of confined space by the use of
calibrated oxygen meter, LEL-meter, toxic gas detectors
should be in frequency of not more than :
a) 2 hours apart c) 1 hour apart
94 b) 1 hour apart d) 30 min apart A
As per AMNS Fatality Prevention Standard, safety net mesh
openings must have a maximum size __________
95
a) 0.5 cm x 0.5 cm c) 100 cm x 100 cm
b) 5 cm x 5 cm d) 10 cm x 10 cm D
As per AMNS Fatality Prevention Standard, self inspections
of fall arresting devices in frequency of:
96
a) Quaterly c) Monthly
b) Before every use d) Six monthly B
Shape of the label while Transportation of hazardous
chemical
97
a) square c) circle
b) diamond d) triagle B
Welding shields primarily protect against…
98 a) Dust c) Splashes
b) Metal splatter d) Flying particles B
The safest ladder to use around electricity is?
99 a) wood c) aluminum.
b) fiberglass. d) a step stool B
Action taken to eliminate the cause of an existing
nonconformity or other undesirable situation in order to
100 prevent recurrence
a) Corrective action c) Recommendation
b) Preventive action d) Prevention A