Scribd
Upload
64 views

Chapter 1: Introduction: Solid State Data Storage Is Gaining Significant Acceptance Today. Storage Based On Ram

Solid-state drives (SSDs) use integrated circuit assemblies rather than mechanical components to store data. SSDs have no moving parts, lower access times than hard disk drives, and are less susceptible to physical shock. While SSDs perform better than HDDs, they are generally more expensive per unit of storage. SSDs are increasingly being used in enterprise applications that require high performance, reliability, and capacity more than consumer products. SSDs access data directly from RAM or flash chips, allowing for much faster data rates than conventional magnetic storage devices like HDDs. SSDs are available in different form factors and solutions that can be installed in servers, storage arrays, and data centers.

Uploaded by

Vinay Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
64 views

Chapter 1: Introduction: Solid State Data Storage Is Gaining Significant Acceptance Today. Storage Based On Ram

Solid-state drives (SSDs) use integrated circuit assemblies rather than mechanical components to store data. SSDs have no moving parts, lower access times than hard disk drives, and are less susceptible to physical shock. While SSDs perform better than HDDs, they are generally more expensive per unit of storage. SSDs are increasingly being used in enterprise applications that require high performance, reliability, and capacity more than consumer products. SSDs access data directly from RAM or flash chips, allowing for much faster data rates than conventional magnetic storage devices like HDDs. SSDs are available in different form factors and solutions that can be installed in servers, storage arrays, and data centers.

Uploaded by

Vinay Sharma
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

CHAPTER 1: INTRODUCTION

A solid-state drive (SSD), sometimes called a solid-state disk or electronic disk, is a data storage device that uses integrated circuit assemblies as memory to store data persistently. SSD technology uses electronic interfaces compatible with traditional block I/O hard disk drives. SSDs do not employ any moving mechanical components, which distinguishes them from traditional magnetic disks such as hard disk drives (HDDs) or floppy disk, which are electromechanical devices containing spinning disks and movable read/write heads. Compared to electromechanical disks, SSDs are typically less susceptible to physical shock, are silent, have lower access time and latency, but are more expensive per unit of storage.

Solid state data storage is gaining significant acceptance today. Storage based on Ram Access Memory (RAM) and Flash chips instead of mechanical hard disk drives is earning much greater attention by meeting the market requirements for reliability, performance, and cost more effectively than ever before.

Additionally, the surge in consumer electronics sales has increased awareness of Flash in particular and solid state storage (SSS) solutions in general. This technology, though available for decades, is finding new ways of providing cost effective solutions in a wide range of commercial and governmental information systems.

These varied environments, often referred to collectively as enterprise applications, typically require higher performance, reliability, and capacity than demanded in consumer products such as music and video players, mobile phones, PCs, and laptops.

Because enterprise-grade solid state storage accesses data directly from RAM or Flash chips, it can achieve input and output data rates far greater than conventional, magnetic storage devices such as hard disk drives (HDD).

SSS products are available in a number of form factors (shapes and sizes) and solution types implemented at different points in the data path. Today, vendors offer SSS products in the size and shape of add in cards that plug into server motherboards, HDD form factor modules

inserted into existing servers and storage arrays, and stand-alone systems intended to be rack mounted alongside other storage media in a data center.

In the past, enterprise SSS solutions have been mostly RAM-based, with batteries and backup HDDs to ensure data persistence. More recently, NAND Flash-based SSS has been introduced into the marketplace as manufacturers have learned to make it reliable and fast enough to meet enterprise needs.

You might also like