When buying open-cast mining equipment with trade mark BELAZ you can be sure of the most optimal

approach to solving of all production and technological problems and assuring the lowest handling costs due to following features:

complete set deliveries of mining equipment; high-grade unification of parts and assemblies; optimal prices of equipment and spares; wide range of consumption materials used; simple maintenance and repair;

low labour input for maintenance; long operating life; service security and technical support along whole usage period; constant improvement work over trucks being produced and development of new models under account of customers requirements.

Series 7555
High productivity, reliability and cost-efficiency of Series BELAZ-7555 dump trucks are assured due to use of highly efficient diesel engines manufactured by leading engine-building Companies of the world simple and reliable Good maneuverability and smooth ride of this series of dump trucks are secured through optimally chosen geometry of truck and steering system as well as through use of original design pneumohydraulic suspension

The comfort and safety of operators work are assured through comfortable cab, hydrostatic steering, combined with highly efficient hydraulic retarder brake and body design with protective canopy functioning as ROPS.

Long operating life of trucks is attained due to use of up-to-date power units, high technical level of components, use of high-strength materials for frame and body manufacturing.

7555 Engine Model

7555

TT 19

QSK19 C

Power rating, kW (hp) Maximum torque, Nm / rpm Specific fuel consumption at rated engine power, g/kW hr Hydromechanical transmission Number of gears Weight Payload capacity, kg Unladen weight, kg Gross weight, kg

522(709) 2739/1400 209,9

559(760) 3084/1300 1500 211

6+1

55000 40600 95600

60000 44100 104100

Depending on materials handled trucks can be equipped with bodies of increased volume.

Engines and external systems

Diesel, four-cycle engines with in-line cylinders arrangement and direct fuel injection.

Hydromechanical transmission 6+1 ratios gears 1 2 3 4 forward 4,070 2,865 2,045 1,437 reverse 4,530

Air cleaning is performed by three stage fil g

Cooling system is of fluid type with forced circulation, combined with hydromechanical transmission cooling system. Hydromechanical transmission oil cooling through water-to-oil heat exchangers.

Tires Pneumatic, tubeless, with quarry tread pattern (E-4). Designation 24.00-35 42 or Radial Designation 24.00R35 Internal pressure in accordance with tire manufacturer instructions. Rim designation 17.00-35/3.5

Starting preheating system is of fluid type.

Starting system features electric starter.

Electric system voltage, V Fuel tank capacity, l

24 740

Driving axle Hydromechanical transmission

Hydromechanical transmission with complex one-stage four-wheel automatically-locked torque converter, four-shaft gearbox with friction clutches and electro-hydraulic gearshift actuator, hydrodynamic blade-type retarder. Mechanical, with one-stage tapered final drive, tapered differential with four pinions, planetary wheel drives with spur gears. Ratios: final drive 2,73 (2,93) wheel drive 7,62 total of driving axle 20,8 (22,30)

Series 7555
Driveline
Two open-type propeller shafts with joints on needle bearings connecting engine with hydromechanical transmission and driving axle. Front propeller shaft has protective guard and Auxiliary brake - hydrodynamic retarder brake on gear-box driving shaft with fast-speed actuation time and with electro-hydraulic control or multiple-disk oil-cooled brake gears of rear wheels in retarder mode.

Suspension
Conventional suspension for front axle and driving axle, cylinders are pneumohydraulic (nitrogen and oil), two cylinders both on the front axle and on the rear axle. Cylinder stroke front suspension, mm 300 rear suspension, mm 270 till hydraulic buffer

Turning radius, m Overall turning diameter, m Steering system pressure, MPa

9 20,5 12,5

Hydraulic system
Combined hydraulic system for body hoist, steering and brake system. Oil pumps are of gear type. Body hoist cylinders are telescopic with two stages. 15 Laden body raising time, s Body lowering time, s 14

Brakes
Service brake dry friction single-disk brake gears with two clamps per disk and automatic clearance adjustment for front and rear wheels or multiple-disk oil-cooled brake gears for rear wheels. Parking brake shoe-and-drum constantly closed brake gear on driving shaft of final drive. Spring actuation, hydraulic control. Emergency brake parking brake and intact circuit of service brake are used.

Cab
One-seat, two-door, vibro-, heat- and soundinsulated operators cab with ROPS, adjustable steering column and additional fold-back seat for passenger or probationer. Operators seat has pneumatic suspension. Cab meets all standard requirements for internal sound levels, vibration, concentration of poisonous substances and dust.

Body
Bucket type body is a welded structure, has a protective canopy and is heated by exhaust gases. It is equipped with a device for mechanical locking in raised position and with rock-ejectors. Floor and side boards are made of high-strength wear-resistant steel (strength l 1050 MPa, hardness l 360 ).

Frame
Frame is a welded structure of high-strength low-alloyed steel with yield strength of 460 MPa. Longitudinal box-section variable height side rails are interconnected by cross-members.

Body Standard Optional

Struck volume, m 22,1 22,1 28

Heaped volume 3 2:1, m 31,3 35,3 37,3 57,9

1, m

12, m

13, m

14, m

W1, m

W5, m

L1, m

L18, m

Note (body type)

3,630 8,150 0,775 4,620 5,300 4,740 8,890 2,065 3,490 8,200 0,530 4,565 5,700 5,080 9,200 2,300 3,875 8,400 0,775 4,555 5,300 4,740 8,890 2,065 4,630 8,200 0,530 4,630 5,700 5,080 9,200 2,300 Increased width, for coal and other bulk cargo with low density Increased width

For coal

50

Exact loading height can change depending on type and model of tires and on tires inflation pressure.

Overall dimensions, m
W1 W5

4.20

H14

H11 H12

H13

0.60

L18 L1

2.935 3.70

Series 7555
Standard complete set of delivery
Equipment Rock ejectors, rock deflectors, device for body locking in raised position, anti-haul rests, firefighting system, fire extinguishers. Indicators Oil temperature in hydromechanical transmission, oil pressure in engine lubrication system, main pressure in hydromechanical transmission, coolant temperature in engine cooling system, brake system oil pressure. Instruments Tachometer with hourmeter, speedometer, voltmeter.

Cab Fully adjustable operator seat on the pneumatic suspension, three-ply windshield, sliding door vent, hardened side and rear windows, windshield wiper and washer, fan and heater, door locks, sun visor, rear view mirrors. Control lamps Turning indicator, maximum allowable clogging of hydraulic system filters, maximum allowable clogging of engine air filters, parking brake system, emergency pressure in brake system circuits, emergency engine oil pressure, emergency coolant temperature and level, low fuel level in tank, emergency fuel level in tank, emergency air pressure in pneumatic system, torque converter lock-up, oil-cooled brakes oil temperature warning (110 and 125 ) for modifications with multiple-disk oil-cooled brakes. Lighting Head lamps, front and rear lights, body lighting lamp, reverse lamp, side turning lamps, number plate lighting lamp, cab dome light, engine compartment light, portable lamp socket, ladder light, deck light, fog lamps.

Warning system Electric horn, braking signal lamps, reverse horn, sound alarm of emergency coolant temperature, sound alarm of emergency pressure in engine lubrication system, sound alarm of emergency oil pressure in brake system, sound alarm of low coolant level, clogging of air filters, sound alarm of dump truck movement with applied parking brake. Spare parts Set of spare parts, tools and accessories for warranty operation period.

Optional delivery set

Air conditioning system, auxiliary cab heater, cab air cleaning system, heated mirrors, automatic centralized lubrication system, engine starting preheater, radio set and audio-player, special equipment for maintenance and repair of dump truck, set of spare parts for after-warranty operation period, MICHELIN, GOODYEAR, BRIDGESTONE tires, loading control system, telemetering tire inflation control system, complete set of parts from sheet wear-resistant steel for fettling of the bottom body.

Series 7555 Series 7555 e ie

BELAZ 7555B ELAZ 7555B
TRACTION PERFORMANCE
Gross vehicle weight, kg x 1000

BRAKING PERFORMANCE
Gross vehicle weight, kg x 1000

480 T Traction force on wheels, kN 420 360 300 240 180 120 60

Total resistance, % (grade + rolling)

Pa d Payload weight, kg x 1000 t, 00

320 Braking force on wheels, kN 280 240 200 160 120 80 40

Pa d Payload weight, kg x 1000 ht, Total resistance, % (grade rolling) T Traveling speed, km/hr

Traveling speed, km/hr

BELAZ 7555E ELAZ 7555E

TRACTION PERFORMANCE
Gross vehicle weight, kg x 1000
104,00

BRAKING PERFORMANCE
Gross vehicle weight, kg x 1000
104,00

480 Total resistance, % (grade + rolling) Pa d Payload weight, kg x 1000 ht, 00 420 Traction force on wheels, kN 360 300 240 180 120 60

320 280 Braking force on wheels, kN 240 200 160 120 80 40

Pa d Payload weight, kg x 1000 ht, 0 Total resistance, % (grade rolling)

Traveling speed, km/hr

T Traveling speed, km/hr

Under our policy of continuous improvement, P "Belarusian Autoworks" reserves the right to modify PA specifications and design without prior notice.

Distributor
RUPE "Belarusian Autoworks" (BELAZ) 40 let Oktyabrya str. 4, 222160, Zhodino, Republic of Belarus phone: +375 1775 3 27 82, 3 26 23, 3 37 37 fax: +375 1775 7 01 37 e mail: [email protected] www.belaz.minsk.by

. . 2423. . 1500 .