Triad Installation Guide

InWall & InRoom Subwoofers

Products InRoom Bronze PowerSub InRoom Silver PowerSub InRoom Gold PowerSub InRoom Platinum PowerSub InWall Bronze/4 PowerSub InWall Bronze/6 PowerSub InWall Bronze/10 PowerSub InWall Silver/15 PowerSub

Triad Speakers Incorporated

Thank You
For purchasing one of Triad's high performance Subwoofers. Every Triad product is designed and manufactured for both optimum performance and minimum impact on your dcor. All Triad PowerSubs are engineered and handcrafted with pride in the United States of America. Please take the time to review this information. We have developed this manual so you would be familiar with all the performance features, and could better appreciate the superb engineering that has been built into your Triad loudspeakers. Thanks again and happy listening. Larry Pexton President

Table of Contents

Triad Speakers PowerSub Information and Installation Instructions Triad PowerSub Amplifier Features New Construction Installation
L U C A S F I L M

Page: 3 4

Triad PowerSub Amplifier Wiring: Two Channel Stereo Triad PowerSub Amplifier Wiring: Multi Channel Surround InWall PowerSub Amplifier: Speaker Wiring Diagram Volume Control Wiring Diagram Product Specifications InRoom Platinum Specifications InRoom Platinum PowerSub Amplifier Features InRoom Platinum PowerSub Amplifier Wiring Triad Rack Amplifier: Adjustments/Amplifier Wiring Warranty and Dealer Information

7 8 9 10

11

12

13

14

Triad PowerSub Amplifier:

Features & Adjustments
Input Level
This controls the gain of the subwoofer amplifier when using the left and right inputs.
MIN

Lowpass A / Lowpass B:
Each control operates an independent 12dB per octave low pass filter. The two filters are in parallel and their effects are combined to achieve 24dB roll-off above the highest common frequency.
MAX 35 45 65 110 250 35 45 65 110 250 0 -90 -180

INPUT LEVEL

LOWPASS FILTER A (HZ)

Phase Control
The phase control adds up to 180 degrees of phase lag to the subwoofers signal. Use it to improve the subwoofer to main speaker blending, especially where the phase of the main signal may have been inverted.

LOWPASS FILTER B (HZ)

Left & Right Inputs (20Hz)

Use these inputs for increased frequency response below 35Hz, and where you wish to have use of the Input Level control and high pass outputs of the sub.

PHASE CONTROL

Theater Input (35Hz)

Use this input with processors and A/V receivers when you wish to maximize output above 35Hz. This is a fixed input level designed to give maximum headroom. When using this input, the Input Level control does not function.

LEFT LINE LEVEL INPUTS RIGHT

THEATER

High Pass Outputs:

The high Pass outputs provide a signal for your main speaker's amplifier which has a fixed 12dB per octave high pass filter at 100 Hz. Requires use of Left and Right inputs.
LEFT LINE LEVEL HIGHPASS OUTPUTS RIGHT

Left & Right Inputs - Using the PowerSub's Speaker to Line Level Converter These convert speaker level at your receiver or power amp to the line level required for use in your PowerSub's line level inputs.

Converter Required For Speaker Level Inputs See Owners Manual

New Construction Installation

Tools you'll need: Power Screw Driver or Hammer Wire Stripers Level Pencil or Pen Supplies you'll need: Triad (NCB) New Construction Bracket Screws or Nails for attaching NCB to studs
16 inch on center studs

Step One - Mark Locate the area where the speaker will be placed on the stud wall keeping in mind that the speaker when installed will take up the full wall cavity within the NCB location (i.e. free from electrical wires, water pipes, etc.). Position the bracket between the desired two studs. Take special note of the location, of the direction arrows silk screened to the inside of the bracket. As you face the wall these arrows should be facing into the room. With the level resting on top of the NCB make sure the brackets top is level and mark with pencil, the location where the NCB touches the studs. Step Two - Attachment Re-check NCB alignment with marks from step one, and attach screws through attachment holes on NCB. Re-check squareness and adjust if necessary. Step Three - Wire Attach the wires from the source to the speaker. You're done! Now the sheet rock people can sheet rock directly to the NCB for a clean look. When you're ready to install the speaker, refer to step two of the Retro-fit Installation section of this manual.

To Amplifiers

Triad PowerSub Amplifier Wiring Diagram (typical methods)

Two Channel Stereo
Speaker Level Alternate method if no pre-out connection jacks are available or using volume control.

A/V Receiver
Speaker Level Outputs
Right Left
MID 80Hz
+ +

80Hz 0
Wire Nu ts
C C
o

LEFT RIGHT THEATER L/HP

Converter Required for Speaker Level Inputs See Owner's Manual

Triad Speaker to Line Level Converters

R/HP

Converter Required for Speaker Level Inputs See Owner's Manual

Triad PowerSub Amplifier Wiring Diagram (typical methods)

Multi Channel Surround
Line Level Preferred method if subwoofer output is available.

THX/Processor
Line Level Sub-Out
Sub Out/ THX
MID 80Hz 80Hz 0
LEFT RIGHT
o

RCA Cable (not supplied)

THEATER L/HP
Converter Required for Speaker Level Inputs See Owner's Manual

R/HP

Converter Required for Speaker Level Inputs See Owner's Manual

InWall PowerSub: Speaker Wiring Diagram

Triad InWall PowerSub Amplifier with Single Speaker Enclosure:

PowerSub Amplifier:
Speaker Wiring Diagram
BLACK + RED

115v AC

Speaker terminal output

Volume Control Wiring Diagram: Satellites & PowerSub

AMPLIFIER

LEFT

RIGHT

Volume Control
With Triad Satellites & PowerSub

VOLUME CONTROL

TRIAD SATELLITES

TRIAD POWERSUB AMPLIFIER

MID 80Hz 80Hz

TRIAD CONVERTERS

0
LEFT

RIGHT THEATER L/HP

Converter Required for Speaker Level Inputs See Owner's Manual

R/HP

TRIAD POWERSUB

Converter Required for Speaker Level Inputs See Owner's Manual

From the volume control, "Y" the speaker wires so that one set goes to the Satellites, and the other set goes to the Triad PowerSub amplifier through a converter. You may only "Y" one channel if you wish to limit deep bass by using the Theater input on the Triad PowerSub amp.

Product Specifications:
InRoom Bronze PowerSub
Cabinet width 13 1/2" Cabinet height with feet 14 1/4" Cabinet depth 13" Shipping weight 40 lbs.

InRoom Silver PowerSub

Cabinet width 15 1/2" Cabinet height with feet 16 1/4" Cabinet depth 14 1/2" Shipping weight 70 lbs.

InRoom Gold PowerSub

Cabinet width 17 1/4" Cabinet height with feet 18 1/8" Cabinet depth 15 3/4" Shipping weight 76 lbs.

InWall Bronze/4 PowerSub

Cabinet width 14 1/4" Cabinet height 19" Cabinet depth 3 15/16" Shipping weight 24 lbs.

InWall Bronze/6 PowerSub

Cabinet width 14 1/4" Cabinet height 19" Cabinet depth 5 15/16" Shipping weight 24 lbs.

InWall Bronze/10 PowerSub

Cabinet width 13 1/2" Cabinet height 13 1/2" Cabinet depth 9 1/2" Shipping weight 20 lbs.

InWall Silver/15 PowerSub

Cabinet width 14 1/4" Cabinet height 19" Cabinet depth 14 1/2" Shipping weight 61 lbs.

10

InRoom Platinum PowerSub Specifications

InRoom Platinum PowerSub Cabinet width 20 3/8" Cabinet height 20 3/8" Cabinet depth 19 1/4" Shipping weight 92 lbs. THX & Non-THX versions available Built-in 500 watt (into actual load) amplifier with 3 Line level inputs (left, right & Mono/THX) Separate Input Control Adjustable 12dB/Octave low pass filter Adjustable Phase Control: 0 to -180 Frequency Response: 18 Hz to 180 Hz (+/3dB) (1m ground plane measurement) at home theater levels Single 18" cast basket, long-excursion, paper cone woofer with 3" voice coil Can be used as an InCabinet/InWall subwoofer when mounted into false walls with the subwoofer firing through an "E" size frame and flat Acoustimesh metal grill Available in various paint, real wood veneers & custom finishes. THX version includes: video shielding & THX logo.

11

Triad Platinum PowerSub Amplifier:

Features & Adjustments
Bass Extension (Hz)
This control adjusts the Bass Extension Level. This determines how low (lowest frequency note) the speaker will play. For THX settings, set the level at the THX mark. If low frequency extension is desired or when using multiple subs, set level at 18 Hz.
35 32 27 22 18 MIN INPUT LEVEL MAX 50 65 80 110 180 0 -90 -180 PHASE CONTROL

BASS EXTENSION LEVEL (Hz)

Input Level
This control adjusts the PowerSub's loudness. Use this adjustment to match the PowerSub's loudness to your front LCR's or satellites. For THX settings, set the level at the THX mark. When using multiple subs this level should be set closer to the MIN mark.

LOWPASS FILTER (HZ)

Low Pass Filter (Hz)

This control set the highest frequency (note) that your PowerSub plays which adjusts (blends) the crossover point between the PowerSub and satellites. For THX settings, set the level at the THX mark.

Phase Control
This adjusts the phase (timing) of the signal that is fed into the Inputs. Use this to fine tune the musical blend between the sub and satellites. Usually set at 0 or 180 degrees.
LEFT

LINE LEVEL INPUTS

MONO

Mono/THX Input
Connect to this RCA jack input when using the "sub out" from an THX Processor or THX Receiver.

RIGHT

Converter Required for Speaker Level Inputs See Owner's Manual

Left & Right Inputs

Connect to these RCA jack inputs when using pre-amp out from processors/pre-amps.
Powered Subwoofers by Triad

Left & Right Inputs - Using the PowerSub's Speaker to Line Level Converter These convert speaker level at your receiver or power amp to the line level required for use in your PowerSub's line level inputs.

Made in the USA

12

InRoom Platinum PowerSub: Amplifier Wiring Diagram

Multi Channel Surround/ 2 Channel Stereo:
Line Level Preferred method if subwoofer output is available

THX/Processor
Line Level Sub-Out
Sub Out
THX THX THX 0
o

RCA Cable (not supplied)

L U C A S F I L M

LEFT MONO/THX RIGHT

Converter Required for Speaker Level Inputs See Owner's Manual

Powered Subwoofers by Triad

Speaker Level Alternate method if no pre-out connection jacks are available

A/V Receiver
Speaker Level Outputs
Right Channel
+

Left Channel
+

MID MID 80Hz 0

o

Wire Nuts

L U C A S F I L M

C C
Triad Speaker to Line Level Center Channel Converters hook-up is optional and is not needed when 2 channel stereo hook-up is used. (left & right speaker outputs)

LEFT MONO/THX RIGHT

Converter Required for Speaker Level Inputs See Owner's Manual

Powered Subwoofers by Triad

13

Triad Rack Amplifier Wiring:

Front Panel Adjustments

MID 80 80 0

LEVEL

LOWPASS 1 LOWPASS 2

PHASE

A/V Receiver
Speaker Level Outputs
Right Left

LEFT

RIGHT

Triad Speaker to Line Level Converters

THX/Processor
Line Level Sub-Out
Sub Out/THX

THEATER IN

14

Warranty Information
For your convenience, we have included a handy place below for you to record your loudspeakers model and serial numbers, the purchase date, and your dealers name and telephone number. If for some reason service becomes necessary, please keep this book and the sales slip together in a safe place for future reference. Triad products are warranted to be

Subwoofers
Model: Model: Dealer Name: Purchase Date: Phone: Serial #'s Serial #'s

free from defects in materials and workmanship for the period stated below when operated under normal use. Amplifier: Loudspeaker: Warranty three (3) years Warranty ten (10) years

This limited warranty period begins on the date of purchase. This limited warranty is extended only to Triad products and is expressly in lieu of all other warranties expressed or implied. Should any defect in materials and workmanship occur within the limited warranty period, please contact Triad Service at 1-800-666-6316 to obtain a Return Authorization (RA) number. The product should be returned to us prepaid, together with proof and date of purchase and the RA number clearly visible on the outside of the box. At our option, we shall repair or replace the product and return it prepaid. If you do not have suitable packaging for the product, contact your dealer, or we can provide it for you, please contact Triad Service at 1-800-666-6316. This limited warranty is extended only to the original purchaser and is not transferable. Warranty covers only products sold in the United States by authorized Triad Dealers. Transit damage is not covered by this limited warranty and if such damage should occur, we will assist you in filing a claim with the shipping company.

Triad Speakers Incorporated

15835 NE Cameron Boulevard Portland, Oregon 97230 503.256.2600 http://www.TriadSpeakers.com