Scribd
Upload
30 views

Computer Communication & Networks

This document provides an overview of key topics related to the physical layer of computer communication and networks. It discusses analog and digital signals and data, including parameters like amplitude, frequency, bandwidth, bit rate, and bit interval. It also covers analog-to-digital conversion using sampling and pulse code modulation. Multiplexing, transmission media, and common transmission impairments like attenuation, distortion, and noise are summarized. Line coding schemes for digital transmission are introduced.

Uploaded by

Ghulam Shabbir
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
30 views

Computer Communication & Networks

This document provides an overview of key topics related to the physical layer of computer communication and networks. It discusses analog and digital signals and data, including parameters like amplitude, frequency, bandwidth, bit rate, and bit interval. It also covers analog-to-digital conversion using sampling and pulse code modulation. Multiplexing, transmission media, and common transmission impairments like attenuation, distortion, and noise are summarized. Line coding schemes for digital transmission are introduced.

Uploaded by

Ghulam Shabbir
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 59

Computer Communication & Networks

Lecture # 04 Physical Layer: Signals & Digital Transmission

Course Instructor: Engr. Sana Ziafat

Physical Layer Topics to Cover


Signals Digital Transmission Analog Transmission Multiplexing Transmission Media

Analog & Digital Data

Data can be analog or digital. The term analog data refers to information that is continuous; digital data refers to information that has discrete states. Analog data take on continuous values. Digital data take on discrete values.

Note

To be transmitted, data must be transformed to electromagnetic signals.

Note

Signals can be analog or digital. Analog signals can have an infinite number of values in a range; digital signals can have only a limited number of values.

Analog Vs Digital

Analog Signals

Sine Wave

Cont

Three parameters to describe a sine wave Peak amplitude Frequency and time period Phase

1. 2. 3.

Note

The bandwidth of a composite signal is the difference between the highest and the lowest frequencies contained in that signal.

Bandwidth

Digital Signals

Digital Signals

In addition to being represented by an analog signal, information can also be represented by a digital signal. For example, a 1 can be encoded as a positive voltage and a 0 as zero voltage. A digital signal can have more than two levels. In this case, we can send more than 1 bit for each level.

Digital Signal

Bit Rate & Bit Interval (contd.)

Bit Interval and Bit Rate


Example
A digital signal has a bit rate of 2000 bps. What is the duration of each bit (bit interval)

Solution
The bit interval is the inverse of the bit rate. Bit interval = 1/ 2000 s = 0.000500 s = 0.000500 x 106 ms = 500 ms

Note

The bit rate and the bandwidth are proportional to each other.

Analog Vs Digital

Analog versus digital signals

Low Pass & Band Pass

Data Rate Limits

Data Rate Limits

A very important consideration in data communications is how fast we can send data, in bits per second, over a channel. Data rate depends on three factors: 1. The bandwidth available 2. The level of the signals we use 3. The quality of the channel (the level of noise)

Noiseless Channel: Nyquist Bit Rate

Defines theoretical maximum bit rate for Noiseless Channel: Bit Rate=2 X Bandwidth X log2L

Example
Consider a noiseless channel with a bandwidth of 3000 Hz transmitting a signal with two signal levels. The maximum bit rate can be calculated as

Bit Rate = 2 3000 log2 2 = 6000 bps

Example 8
Consider the same noiseless channel, transmitting a signal with four signal levels (for each level, we send two bits). The maximum bit rate can be calculated as:

Bit Rate = 2 x 3000 x log2 4 = 12,000 bps

Note

Increasing the levels of a signal may reduce the reliability of the system.

Noisy Channel: Shannon Capacity

Defines theoretical maximum bit rate for Noisy Channel: Capacity=Bandwidth X log2(1+SNR)

Example
Consider an extremely noisy channel in which the value of the signal-to-noise ratio is almost zero. In other words, the noise is so strong that the signal is faint. For this channel the capacity is calculated as C = B log2 (1 + SNR) = B log2 (1 + 0)

= B log2 (1) = B 0 = 0

Example
We can calculate the theoretical highest bit rate of a regular telephone line. A telephone line normally has a bandwidth of 4KHz. The signal-to-noise ratio is usually 3162. For this channel the capacity is calculated as

C = B log2 (1 + SNR) = 3000 log2 (1 + 3162) = 3000 log2 (3163) C = 3000 11.62 = 34,860 bps

Example
We have a channel with a 1 MHz bandwidth. The SNR for this channel is 63; what is the appropriate bit rate and signal level?

Solution
First, we use the Shannon formula to find our upper limit.
C = B log2 (1 + SNR) = 106 log2 (1 + 63) = 106 log2 (64) = 6 Mbps

Then we use the Nyquist formula to find the number of signal levels.
6 Mbps = 2 1 MHz log2 L L = 8

Note

The Shannon capacity gives us the upper limit; the Nyquist formula tells us how many signal levels we need.

Transmission Impairments

Transmission Impairments

Signals travel through transmission media, which are not perfect. The imperfection causes signal impairment. This means that the signal at the beginning of the medium is not the same as the signal at the end of the medium. What is sent is not what is received. Three causes of impairment are attenuation, distortion, and noise.

Transmission Impairments

Decibel

Used to signal gained or lost strength db = 10 log P2/P1 Db= 20 log V2/V1

Example

Suppose a signal travels through transmission medium and its power is reduced to one half. Calculate attenuation loss?

Signal Distortion
attenuation

distortion

noise

Performance

One important issue in networking is the performance of the networkhow good is it?

Performance

Bandwidth Throughput Latency (Delay) Bandwidth-Delay Product

Throughput

Latency

Latency = propagation time + transmission time + queuing time + processing time

Propagation Time

Note

The bandwidth-delay product defines the number of bits that can fill the link.

Physical Layer Topics to Cover


Signals Digital Transmission
Analog Transmission Multiplexing Transmission Media

Analog To Digital Conversion

Sampling
Pulse Code Modulation Sampling Rate: Nyquist Theorem

PCM

Quantization & Encoding Samples

Note

According to the Nyquist theorem, the sampling rate must be at least 2 times the highest frequency contained in the signal.

Transmission Modes

Digital to Digital Conversion

The conversion involves three techniques: line coding, block coding, and scrambling. Line coding is always needed; block coding and scrambling may or may not be needed.

Line Coding & Decoding

Signal Levels (Elements) Vs Data Levels (Elements)

Data Rate Versus Pulse Rate

Number of bits per second = Data Rate Number of signal elements per second = Pulse Rate

Pulse Rate Vs Bit Rate


Example
A signal has two data levels with a pulse duration of 1 ms. We calculate the pulse rate and bit rate as follows:

Pulse Rate = 1/ 10-3= 1000 pulses/s Bit Rate = Pulse Rate x log2 L = 1000 x log2 2 = 1000 bps

DC Component

Lack of Synchronization

Example 3
In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Kbps? How many if the data rate is 1 Mbps?

Solution
At 1 Kbps: 1000 bits sent 1001 bits received1 extra bps At 1 Mbps: 1,000,000 bits sent 1,001,000 bits received1000 extra bps

Line Coding Schemes

You might also like