Scribd
Upload
314 views

Channel Estimation

This document discusses channel equalization techniques. It begins with an introduction to channel equalization and the purpose of equalizers to reduce intersymbol interference caused by signal distortion during transmission. It then describes linear equalizers that use weighted combinations of the received signal to minimize interference, including zero forcing and minimum mean square error equalizers. Decision feedback equalizers are also introduced as a nonlinear technique to cancel interference from already detected symbols. The document outlines adaptive algorithms used for channel equalization, including the stochastic gradient descent method. It concludes by discussing evaluations of these techniques on static and time-varying channels using simulations.

Uploaded by

rameshbe048030
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
314 views

Channel Estimation

This document discusses channel equalization techniques. It begins with an introduction to channel equalization and the purpose of equalizers to reduce intersymbol interference caused by signal distortion during transmission. It then describes linear equalizers that use weighted combinations of the received signal to minimize interference, including zero forcing and minimum mean square error equalizers. Decision feedback equalizers are also introduced as a nonlinear technique to cancel interference from already detected symbols. The document outlines adaptive algorithms used for channel equalization, including the stochastic gradient descent method. It concludes by discussing evaluations of these techniques on static and time-varying channels using simulations.

Uploaded by

rameshbe048030
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 26

Channel Equalization Techniques

Fernando Gregorio
Based on: 1-Adaptive Signal Processing, Benesty-Huang 2-Fundamentals of Adaptive Filtering, Ali H. Sayed

Outline
Introducction Channel equalization Linear equalizers Decision feedback equalizers

Adaptive algorithms for channel equalization Adaptive linear equalizer Adaptive DFE Training and tracking Simulations Static channel Time varying channel
S88-4221 Seminar

Introduction
In a communication system, the transmitter sends the information over an RF channel. The channel distorts the transmitted signal befores it reaches the receiver. The receiver task is to figure out what signal was transmitted Turn the received signal in understandable information.

S88-4221 Seminar

Introduction
Intersymbol Interference (ISI) Noise
Noise

Channel

desired signal

ISI
S88-4221 Seminar

noise

Introduction
The purpose of an equalizer is to reduce the ISI as much as possible to maximize the probability of correct decisions
Noise

Channel

Equalizer

S88-4221 Seminar

Linear Equalizers
The current and the past values of the received signal are linearly weigthed by equalizer coefficients and summed to produce the output.

The ISI can be completely removed, without taking in consideration the resultanting noise enhacement Zero forcing equalizer.

A substantial increment of the noise power is created using ZF equalizer.


S88-4221 Seminar

Linear Equalizers
Mean-Square Error equalizer From the point-of-view of minimizing error probability, it is adventageous to allow some residual ISI if this can reduce the noise power. The MSE criterion attempts to minimize the total error between the slicer input and the transmitted data symbol.

Power noise
S88-4221 Seminar

Transmit signal

Decision-Feedback Equalizers
Simple nonlinear equalizer which is particulary useful for channel with severe amplitude distortion. DFE uses desicion feedback to cancel the interferfence from symbols which have already have been detected.

The basic idea is that if the values of the symbols already detected are known (past decisions are assumed correct), then the ISI contributed by these symbols can be canceled exactly.

S88-4221 Seminar

Decision-Feedback Equalizers
Decision feedback equalizer structure
The forward and feedback coefficients may be adjusted simultaneously to minimize the MSE.
Feed back filter (FBF) Input Feed forward filter (FFF) Adjustment of filter coefficients Output + + Symbol decision

S88-4221 Seminar

Adaptive Equalization
The object is to adapt the coefficients to minimize the noise and intersymbol interference (depending on the type of equalizer) at the output. The adaptation of the equalizer is driven by an error signal.
The aim is to minimize:
Error signal

J E ek

Channel

Equalizer

S88-4221 Seminar

Adaptive Equalization
There are two modes that adaptive equalizers work; Decision Directed Mode: The receiver decisions are used to generate the error signal. Decision directed equalizer adjustment is effective in tracking slow variations in the channel response. However, this approach is not effective during initial acqusition . Training Mode: To make equalizer suitable in the initial acqusition duration, a training signal is needed. In this mode of operation, the transmitter generates a data symbol sequence known to the receiver. Once an agreed time has elapsed, the slicer output is used as a training signal and the actual data transmission begins.
S88-4221 Seminar

Stochastic gradient algorithm


The main idea is to minimize the mean square error between the output of the equalizer, and the transmitted signal. Since the number of samples that the receiver observe is finite, mean square is calculated by using time averages instead of ensemble averages. The resulting adaptation algorithm becomes;

Error signal
S88-4221 Seminar

Received signal

Stochastic gradient algorithm


LINEAR EQUALIZER
Error signal

Trainning mode

Decision directed mode


+

Channel

Equalizer

S88-4221 Seminar

Decision-Feedback Equalizers
Decision feedback equalizer structure
The forward and feedback coefficients may be adjusted simultaneously to minimize the MSE.

Feedback Input F(z) Feed forward C(z) Adjustment of filter coefficients + + Output Symbol decision

S88-4221 Seminar

Decision-Feedback Equalizers

Feedback Input F(z) Feed forward C(z) Adjustment of filter coefficients + + Output Symbol decision

S88-4221 Seminar

Evaluation 1
Linear equalizer
LMS Wiener solution Scenarios
Channel 1 Channel 2 ( Time varying channel)

S88-4221 Seminar

Evaluation 1- Linear Equalizer


Static Channel
Lf=5 Delay=4 SNR=30dB

h = [0.2, -0.15, 1.0, 0.21, 0.03]

S88-4221 Seminar

Evaluation 1- Linear Equalizer


Static Channel
Lf=12 Delay=11 SNR=30dB

h = [0.2, -0.15, 1.0, 0.21, 0.03]

S88-4221 Seminar

Evaluation 1 - Linear Equalizer


Time varying channel
Rayleigh
5 taps, fd=10 Hz , Ts=0.8us

Lf=8 , mu=0.1 Delay=7 SNR=30dB

S88-4221 Seminar

Evaluation 1 - Linear Equalizer


Time varying channel
Rayleigh
5 taps, fd=80 Hz , Ts=0.8us

Lf=8 , mu=0.1 Delay=7 SNR=30dB

S88-4221 Seminar

Evaluation 2
Desicion feedback equalizer
LMS Decision direct mode and trainning mode Scenarios
Channel 1 h = [0.2, -0.15, 1.0, 0.21, 0.03] Channel 2 h = [0.2, -0.35, 1.0, 0.51, 0.03]

S88-4221 Seminar

Evaluation 2
Decision Feedback equalizer (static channel)
Channel 2 Severe ISI

Channel 1

S88-4221 Seminar

Evaluation 3
Decision Feedback equalizer
Rayleigh
5 taps, fd=20 Hz , Ts=0.8us

Lf=8 , mu=0.015 ,Lfeed=5 Delay=7 SNR=30dB

S88-4221 Seminar

Evaluation 3
Decision Feedback equalizer
Rayleigh
5 taps, fd=80 Hz , Ts=0.8us

Lf=8 , mu=0.015 ,Lfeed=5 Delay=7 SNR=30dB

S88-4221 Seminar

Matlab examples

S88-4221 Seminar

Conclusions
Adaptive equalizer is an essential component of communication systems. Low complexity implementation with a good performance in channel with low levels of ISI is obtained using linear equalizers. In case of channels with severe ISI, DFE is the best option.

S88-4221 Seminar

You might also like