Scribd
Upload
224 views

Lecture 10,11 (Day 11,12)

This document provides step-by-step instructions for using ETABS software to perform seismic analysis and design of a 10-story reinforced concrete building using equivalent lateral force analysis. It outlines 14 steps for modeling the building, applying loads, running analysis, and reviewing results. It then describes additional steps for running concrete frame and shear wall design and viewing design results. The overall process demonstrates how ETABS can be used to efficiently model, analyze, and design an RC building for earthquake loading.

Uploaded by

Saiful Hoque Sohel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
224 views

Lecture 10,11 (Day 11,12)

This document provides step-by-step instructions for using ETABS software to perform seismic analysis and design of a 10-story reinforced concrete building using equivalent lateral force analysis. It outlines 14 steps for modeling the building, applying loads, running analysis, and reviewing results. It then describes additional steps for running concrete frame and shear wall design and viewing design results. The overall process demonstrates how ETABS can be used to efficiently model, analyze, and design an RC building for earthquake loading.

Uploaded by

Saiful Hoque Sohel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

Civil Engineering Software Program

ETABS
By Md. Saiful Hoque Sohel
B.Sc. in Civil (BUET) M.Sc. In Structure (BUET,ER) MIEB: M/24108, DMINB-CE0334

Lesson 10 & 11: Example

Seismic Analysis & Design of 10 Story RC Building (Equivalent Lateral Force)

Section Properties Member Dimension Beam (width x Height) 30 x 60 cm Column 50 x 50 cm Slab Thickness = 15 cm Shear wall Thickness = 20 cm Plan View (Unit in m)

Story Height Data Story Height Typical Story 3.00 m Story at base of building 4.00 m

Static Load Cases Load Name DEAD Load Type Dead Load Details Self Weight of Structural Members Calculate automatically using Self Weight Multiplier in ETABS Uniform Load on Slabs: (Finishing + Partition Load) Uniform Load on Beams: (Wall Load) LIVE Live Load Uniform Load on Slabs: 2.2KN/m2 Calculate 2KN/m2 Value

Also included with Earth Quake & Wind Load. This Building is located on Dhaka. Assume reasonable value which is required for analysis from BNBC or ACI .

Step by Step
1. Start Model with Template Step 1-1: Select Working Unit and Start New Model using Template Step 1-2: Specify Grid and Story Dimension Step 1-3: Enter Two Way Slab System Parameters Step 1-4: Create Two Way Slab System Model 2. Define Material Properties Step 2-1: Change Working Unit Step 2-2: Check Material Properties 3. Define and Assign Section Properties Step 3-1: Define New Frame Section and Specify Section Properties for Beam Step 3-2: Enter Property Modifiers Step 3-3: Specify Reinforcement Data for Beam Step 3-4: Add Frame Section for Column Step 3-5: Specify Column Section Properties Step 3-6: Specify Reinforcement Data for Column Step 3-7: Define Slab Section Properties Step 3-8: Define Wall Section Properties Step 3-9: Select All Beams and Assign B30x60 Section Properties Step 3-10: Select All Columns and Assign C50x50 Section Properties

Step by Step.Continue
4. Draw Shear Wall and Define Pier Labels Step 4-1: Change View to Plan View and Change Working Unit to Ton-m Step 4-2: Add Nodes at Shear Wall Corner Location Step 4-3: Add 2 Nodes at Shear Wall Corner Location Step 4-4: Select All Stories and Draw Shear Walls Step 4-5: Assign Pier Label for Shear Wall Design 5. Define Similar Stories Option

Step 5-1: Define Master Story


6. Modify Floor Plan at STORY8 to STORY10 Step 6-1: Show Shell Panel in Solid Shade Step 6-2: Select All Slab Panels at STORY10 Step 6-3: Delete All Elements at Bottom-right Corner of Building Step 6-4: Draw Beam at Front of Elevator Step 6-5: Draw Opening at Elevator Area

Step by Step.Continue
7. Modify Floor Plan at BASE to STORY7 Step 7-1: Change View to STORY7 Step 7-2: Draw Beam at Front of Elevator Step 7-3: Draw Opening at Elevator Area 8. Assign Auto Mesh Options at Shell Panels Step 8-1: Use Auto Mesh on Slab and Wall Panels 9. Assign Supports Step 9-1: Change Plan View to BASE and Select All Nodes on BASE Floor 10. Assign DEAD and LIVE Load Step 10-1: Assign DEAD Uniform Load on Slab Panels Step 10-2: Assign DEAD Uniform Load on Beams Step 10-3: Change Load Type for LIVE Load Case Step 10-4: Assign LIVE Uniform Load on Slab Panels

Step by Step.Continue
11. Define and Assign Wind Load Case Step 11-1: Add WINDX Load Case Step 11-2: Specify WINDX Load Case Step 11-3: Add and Specify WINDY Load Case Step 11-4: Draw Null Areas at Side of Building for Wind Pressure Coefficient Step 11-5: Assign Windward Wind Coefficient to Null Areas for WINDX Load Case Step 11-6: Assign Leeward Wind Coefficient to Null Areas for WINDX Load Case Step 11-7: Assign Windward Wind Coefficient to Null Areas for WINDY Load Case Step 11-8: Assign Leeward Wind Coefficient to Null Areas for WINDY Load Case 12. Define Static Load Case for Equivalent Seismic Force Step 12-1: Add EQXA Load Case Step 12-2: Specify EQXA Load Case Parameters Step 12-3: Add EQXB Load Case and Specify Load Case Parameters Step 12-4: Add EQYA Load Case and Specify Load Case Parameters Step 12-5: Add EQYB Load Case and Specify Load Case Parameters Step 12-6: Deactivate Special Seismic Load Effect

Step by Step.Continue
13. Run Analysis and View Results Step 13-1: Start Analysis Step 13-2: Check Error from Analysis Run Record Step 13-3: Display Deformed Shape in 3D View Step 13-4: View Analysis Result Diagrams of Frame Elements (Beam or Column) Step 13-5: View Analysis Result Diagram at Particular Frame Element Step 13-6: Create Elevation View for Display Analysis Results in Wall Panels Step 13-7: Change View to Elevation View at Elevator Location Step 13-8: View Analysis Result Diagrams of Shear Wall (Pier) Step 13-9: View Analysis Result Contour in Shear Wall Panels (Elevation View) Step 13-10: View Analysis Result Contour in Slab Panels (Plan View) Step 13-11: View Analysis Results in Tabular Form 14. Run Concrete Frame Design and View Results Step 14-1: Select Design Code Step 14-2: View Load Combination for Concrete Frame Design Step 14-3: Start Concrete Frame Design Step 14-4: Display Longitudinal Reinforcing for Concrete Frame Design Step 14-5: Display Shear Reinforcing for Concrete Frame Design Step 14-6: Display Concrete Frame Design in Details

Step by Step.Continue
15. Run Shear Wall Design and View Results Step 15-1: Change view to Elevation View Step 15-2: Select Design Code for Shear Wall Design Step 15-3: View Load Combination for Shear Wall Design Step 15-4: Start Shear Wall Design Step 15-5: Display Pier Design Information for Shear Wall Design Step 15-6: Display Pier Design Details for Shear Wall Design

THANK YOU
PRUDENTIAL CONSULTANT
CIVIL ENGINEERING SOFTWARE PROGRAME EMAIL:- [email protected] EMAIL:- [email protected]

Mobile: 01911918547

You might also like