Scribd
Upload
2K views

Number System in Computer

Number systems define how numbers can be represented using symbols. The most common systems are decimal, binary, hexadecimal, and octal. Decimal uses base 10 with symbols 0-9, binary uses base 2 with symbols 0-1. Other systems use higher bases like 16 for hexadecimal with additional symbols A-F and 8 for octal. Numbers can be converted between systems by repeatedly dividing the number by the base and recording the remainders as the new digits.

Uploaded by

Ghanshyam Parmar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
2K views

Number System in Computer

Number systems define how numbers can be represented using symbols. The most common systems are decimal, binary, hexadecimal, and octal. Decimal uses base 10 with symbols 0-9, binary uses base 2 with symbols 0-1. Other systems use higher bases like 16 for hexadecimal with additional symbols A-F and 8 for octal. Numbers can be converted between systems by repeatedly dividing the number by the base and recording the remainders as the new digits.

Uploaded by

Ghanshyam Parmar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 31

Number Systems

2.1

Introduction

INTRODUCTION

Number system is a crucial parts of human and machine. Same as computer uses Binary Number system. The measure of computer is bit, like 0 & 1. To storing the data in particular device is considering this way to calculate the capacity of device. This are number of number system available.

2.2

A number system defines how a number can be represented using distinct symbols. A number can be represented differently in different systems. For example, the two numbers (2A)16 and (52)8 both refer to the same quantity, (42)10, but their representations are different.

2.3

The decimal system (base 10)


The word decimal is derived from the Latin root decem (ten). In this system the base b = 10 and we use ten symbols S = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9} The symbols in this system are often referred to as decimal digits or just digits.
104 10000 103 1000 102 100 101 10 100 1 10-1 .1 10-2 .01 10-3 .001

2.4

Each digit appearing to left of decimal point represent a value between 0 and 9 times power of ten represented by its position in number.

Digit appearing to the right of decimal point represent a value between 0 to 9 an increasing negative power of ten.

2.5

Example 2.1 The following shows the place values for the integer +224 in the decimal system.

2.6

Example 2.2 The following shows the place values for the decimal number 7508. We have used 1, 10, 100, and 1000 instead of powers of 10.

) Values

2.7

Example 2.3

The following shows the place values for the real number +24.13.

2.8

The binary system (base 2)


The word binary is derived from the Latin root bini (or two by two). In this system the base b = 2 and we use only two symbols,
S = {0, 1}

The symbols in this system are often referred to as binary digits or bits (binary digit).
27 128 26 64 25 32 24 16 23 8 22 4 21 2 20 1 2-1 .5 2-2 .25

2.9

Integers

Figure 2.2 Place values for an integer in the binary system


2.10

Most modern computer system do not represent numeric values using the decimal system. Instead, they typically use a binary or twos complement numbering system. Most modern computer system operate using binary logic. The computer represent values using two voltage level. With two level we can represent exactly two different values.

2.11

These could be any two different values, but by conversion we used the values 0 and 1. These two value, coincidentally, correspond to the two digits used by binary number system. Since there is a correspondence between the logic level used by computer and the two digit used in binary numbering system. It should come as no surprise that computer employ the binary system. The binary system works like the decimal number system except the binary system use base 2 includes the digit 0 and 1.

2.12

Example 2.4 The following shows that the number (11001)2 in binary is the same as 25 in decimal. The subscript 2 shows that the base is 2.

The equivalent decimal number is N = 16 + 8 + 0 + 0 + 1 = 25.

2.13

Reals

Example 2.5 The following shows that the number (101.11)2 in binary is equal to the number 5.75 in decimal.

2.14

The hexadecimal system (base 16)


The word hexadecimal is derived from the Greek root hex (six) and the Latin root decem (ten). In this system the base b = 16 and we use sixteen symbols to represent a number. The set of symbols is

S = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F}

Note that the symbols A, B, C, D, E, F are equivalent to 10, 11, 12, 13, 14, and 15 respectively. The symbols in this system are often referred to as hexadecimal digits.
2.15

Integers

Figure 2.3 Place values for an integer in the hexadecimal system


2.16

Example 2.6 The following shows that the number (2AE)16 in hexadecimal is equivalent to 686 in decimal.

The equivalent decimal number is N = 512 + 160 + 14 = 686.

2.17

The octal system (base 8)


The word octal is derived from the Latin root octo (eight). In this system the base b = 8 and we use eight symbols to represent a number. The set of symbols is

S = {0, 1, 2, 3, 4, 5, 6, 7}

2.18

Integers

Figure 2.3 Place values for an integer in the octal system


2.19

Example 2.7

The following shows that the number (1256)8 in octal is the same as 686 in decimal.

Note that the decimal number is N = 512 + 128 + 40 + 6 = 686.

2.20

Summary of the four positional systems


Table 2.1 shows a summary of the four positional number systems discussed in this chapter.

2.21

Table 2.2 shows how the number 0 to 15 is represented in different systems.

2.22

Conversion
We need to know how to convert a number in one system to the equivalent number in another system. Since the decimal system is more familiar than the other systems, we first show how to covert from any base to decimal. Then we show how to convert from decimal to any base. Finally, we show how we can easily convert from binary to hexadecimal or octal and vice versa.

2.23

Any base to decimal conversion

Figure 2.5 Converting other bases to decimal


2.24

Example 2.8

The following shows how to convert the binary number (110.11)2 to decimal: (110.11)2 = 6.75.

2.25

Example 2.10 The following shows how to convert (23.17)8 to decimal.

This means that (23.17)8 19.234 in decimal. Again, we have rounded up 7 82 = 0.109375.

2.26

Decimal to any base

2.27

Figure 2.6 Converting other bases to decimal (integral part)

Figure 2.7 Converting the integral part of a number in decimal to other bases

2.28

Example 2.11 The following shows how to convert 35 in decimal to binary. We start with the number in decimal, we move to the left while continuously finding the quotients and the remainder of division by 2. The result is 35 = (100011)2.

2.29

Example 2.12 The following shows how to convert 126 in decimal to its equivalent in the octal system. We move to the right while continuously finding the quotients and the remainder of division by 8. The result is 126 = (176)8.

2.30

Example 2.14

Convert the decimal number 0.625 to binary.

Since the number 0.625 = (0.101)2 has no integral part, the example shows how the fractional part is calculated.

2.31

You might also like