CS
CS
UE
NodeB
RNC
MGW/CN
L1 Synchronization
[RRCconnRepTimer1/2(100ms,1s)]
L1 Synchronization
NBAP: Synchronization Indication
RRC: RRC Connection Setup Complete (DCH)
UE
NodeB
RNC
MGW/CN
RAB Establishment
RL modification procedure:
SRB+DCH, HW resources checked
Possible failure in AAL2
setup (Iub, Iur and Iu)
Soft handover is not allowed during the RAB establishment procedure (The mobile can not add or remove cells in
AS) this makes the UE and Node B particularly sensitive to mobility and dominance Timer wf_rb_setup_cpl (6s) is
started when the RRC: Radio Bearer Setup message is sent to the UE In case the timer expires Iu Release Request is
sent to the CN with release cause (radio_conn_lost)
RRC: Radio Bearer Setup Complete
RANAP: RAB Assignment Response
UE
NodeB
RNC
MGW/CN
Call Established
RANAP: Location Report
RRC: Measurement Control
Call Disconnect
RRC: Uplink Direct Transfer (CC: Disconnect)
RANAP: Direct Transfer (CC: Disconnect)
RANAP: Direct Transfer (CC: Release)
RRC: Downlink Direct Transfer (CC: Release)
RANAP: Direct Transfer (CC: Release Complete)
RANAP: Iu Release Command
RANAP: Iu Release Complete
RRC: Downlink Direct Transfer (CC: RRC Connection Release)
RRC: Uplink Direct Transfer (CC: Release Complete)
RRC: Uplink Direct Transfer (CC: Release Complete)
RRC: Uplink Direct Transfer (CC: Release Complete)
NBAP: Radio Link Deletion Request
NBAP: Radio Link Deletion Response
ALCAP: ERQ (Establish Request)
ALCAP: ECF (Establish Confirm)
UE
MGW/CN
RNC
RANAP: Paging
RRC: Paging Type 1
L1 Synchronization
UE
NodeB
RNC
MGW/CN
RAB Establishment
RL modification procedure:
SRB+DCH, HW resources checked
Possible failure in AAL2
setup (Iub, Iur and Iu)
Soft handover is not allowed during the RAB establishment procedure (The mobile can not add or remove cells in
AS) this makes the UE and Node B particularly sensitive to mobility and dominance Timer wf_rb_setup_cpl (6s) is
started when the RRC: Radio Bearer Setup message is sent to the UE In case the timer expires Iu Release Request is
sent to the CN with release cause (radio_conn_lost)
RRC: Radio Bearer Setup Complete
RANAP: RAB Assignment Response
UE
NodeB
RNC
MGW/CN
RANAP: Direct Transfer (CC: Alerting)
RANAP: Direct Transfer (CC: Connect)
Call Established
RANAP: Location Report
MOC
M
T
C
DL SRB
UE in DUAL MODE
Voice AMR
CS call, 64Kbps,
Transparent
Video Call
Video CS 64:
DL SF 32
UL SF 16
Voice AMR:
DL SF 128
UL SF 64