Scribd
Upload
103 views

Risc Cisc: Yuan Wei Bin Huang Amit K. Naidu

This document discusses the differences between RISC and CISC processor architectures and how they have converged over time due to technological advances. It notes that originally RISC processors had advantages like fixed instruction length and execution time that made them better suited for early constraints like expensive memory and primitive compilers. However, as transistor counts increased, CISC designs incorporated RISC features like caches, pipelines, and superscalar execution. Now the boundaries have blurred and the main factors driving processor design are performance and the economics of semiconductor manufacturing.

Uploaded by

ZeeJohn123
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
103 views

Risc Cisc: Yuan Wei Bin Huang Amit K. Naidu

This document discusses the differences between RISC and CISC processor architectures and how they have converged over time due to technological advances. It notes that originally RISC processors had advantages like fixed instruction length and execution time that made them better suited for early constraints like expensive memory and primitive compilers. However, as transistor counts increased, CISC designs incorporated RISC features like caches, pipelines, and superscalar execution. Now the boundaries have blurred and the main factors driving processor design are performance and the economics of semiconductor manufacturing.

Uploaded by

ZeeJohn123
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

RISC vs CISC

Yuan Wei
Bin Huang
Amit K. Naidu

Introduction - RISC and CISC


Boundaries have blurred.
Modern CPUs Utilize features of both.
The Manufacturing and Economics
aspect.

Debate becoming moot


Converging implementations , example

Typical RISC features :


Fewer Instructions
Fixed instruction length
Fixed execution time

Lower Cost

No longer restricted to RISC.

Historical Context
Design approaches developed around
available technological resources.

Memory - expensive

Compilers - lousy

VLSI - primitive

No Big Difference Now!


Common Goal of High Performance will
bring them together

Incorporating each others features


Incorporating similar functional units.
Branch Prediction
OOE etc

An exception
Embedded Processors

CISC is unsuitable
MIPS/watt ratio
Power consumption
Heat dissipation
Simple Hardware = integrated peripherals

CISC to RISC (1)


What Intel, the most famous CISC
advocates, and HP do in IA-64:

Migrate to a Common Instruction Set.


Creating Small Instructions
More concise Instruction Set.
Shorter Pipeline
Lower Clock Cycle

CISC to RISC (2)


What Intel, the most famous CISC
advocates, and HP do in IA-64:

Abandon the Out-of-order Execution In


Hardware
Depend on Compiler to Handle Instruction
Execution Order. Shifting the Complexity to
Software.

CISC to RISC (3)


AMD Use Microcode and Direct Execution
to Handle Control in Athlon
CISC Datapaths Support Other RISC-like
Features (such as register-to-register
addressing and an expanded register
count).

RISC to CISC (1)


Additional registers
On-chip caches (which are clocked as fast
as the processor)
Additional functional units for superscalar
execution

RISC to CISC (2)


Additional "non-RISC" (but fast)
instructions
On-chip support for floating-point
operations
Increased pipeline depth

CISC and RISC


Incorporating Same Features

Complex Multi-level Cache


Branch Prediction
Out-of-order Execution

CISC vs RISC
Hard to Distinguish Now. Boundary is
getting vague.
Academia dont Care
Industry doesnt Care (Except for
Advertisements)

RISC vs CISC
Which one is better for general-purpose
microprocessor design?
It does not matter because

The main factor driving general-purpose


microprocessor design has been the
peculiar economics of semiconductor
manufacturing

Economics of IC Manufacturing
Cost per chip

Cost per transistor


$/gate

Transistor count

Transistor count

The graph tells us...


These curves strongly favor designs
near the knee of the curve
All microprocessors in a certain time
have roughly the same number of
transistors
Key design tradeoff: what to do with a
given number of transistors?

RISC vs CISC: 500k transistors


For a few years in the late 80s, designers
had a choice:

CISC CPU and no on-chip cache


RISC CPU and on-chip cache

On-chip cache was probably a slightly better


choice, giving RISC several years of modest
advantage
It is not RISC who gave better performance
at this certain period; it was about the onchip cache!

RISC vs CISC: 2M transistors


Now possible to have both CISC and
on-chip cache
CISC can challenge RISC and it even
has more advantage
RISC chips become more CISC-like

Even More Transistors


Then more transistors became
available than single CISC CPU and
reasonable cache could use What
now?

Multi-processor chips?
Superscalar?
VLIW?

Convergence: 5M transistors
Superscalar won. But

It is really hard to pipeline and schedule


superscalar computations when instruction
cycles, word-lengths differ, and when there
are 100s of different instructions
Compilers used only a small subset of
instructions

This pushed CISC designs to be more


RISC-like

Even more: 50M transistors


The economy of IC manufacturing have
been making RISC and CISC go
together
Maybe one day these two become
historic terms and ?ISC will prevail

Thank You.

You might also like