Scribd
Upload
673 views17 pages

Introduction To Computer Networks

A computer network connects two or more computers together. Networks can be either local (LAN), metropolitan (MAN), or wide area (WAN) depending on their geographic size. Computer networks allow for resource and information sharing, communication, and remote computing. Common network topologies include bus, star, tree, ring, and mesh. Key network components are physical media, connecting devices like hubs and switches, computers, networking software, and applications. Popular networking protocols include TCP/IP. Common network applications are email, web browsing, ecommerce, VoIP, and video conferencing.

Uploaded by

khanpmansoor
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
673 views17 pages

Introduction To Computer Networks

A computer network connects two or more computers together. Networks can be either local (LAN), metropolitan (MAN), or wide area (WAN) depending on their geographic size. Computer networks allow for resource and information sharing, communication, and remote computing. Common network topologies include bus, star, tree, ring, and mesh. Key network components are physical media, connecting devices like hubs and switches, computers, networking software, and applications. Popular networking protocols include TCP/IP. Common network applications are email, web browsing, ecommerce, VoIP, and video conferencing.

Uploaded by

khanpmansoor
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 17

Introduction to Computer Networks

INTRODUCTION TO COMPUTER
NETWORKS
Created by:
P.Mansoor khan
III yr CSE
Introduction to Computer Networks

Computer Networks
Computer network
connects two or more
autonomous computers.

The computers can be


geographically located
anywhere.
Introduction to Computer Networks

LAN, MAN & WAN


Network in small geographical Area (Room, Building
or a Campus) is called LAN (Local Area Network)

Network in a City is call MAN (Metropolitan Area


Network)

Network spread geographically (Country or across


Globe) is called WAN (Wide Area Network)
Introduction to Computer Networks

Applications of Networks
Resource Sharing
Hardware (computing resources, disks, printers)
Software (application software)
Information Sharing
Easy accessibility from anywhere (files, databases)
Search Capability (WWW)
Communication
Email
Message broadcast
Remote computing
Distributed processing (GRID Computing)
Introduction to Computer Networks

Network Topology
The network topology defines the way in which computers,
printers, and other devices are connected. A network
topology describes the layout of the wire and devices as well
as the paths used by data transmissions.
Introduction to Computer Networks

Bus Topology
A bus network uses a multi-
drop transmission medium.
This allows only one device
to transmit at a time.
A distributed access
protocol determines which
station is to transmit.
A bus topology connects
each computer (nodes) to a
single segment trunk is
referred to as the 'bus'.
Star topology
Star topology is the network
setup widely used in home
and office.
In Star Topology there is a
central connection point
called the hub or switch.
A major disadvantage of this
type of network topology is
that if the central hub fails, all
computers connected to that
hub would be disconnected
Introduction to Computer Networks

Tree Topology

A tree topology combination


of bus and star topologies.
It consists of groups of star-
configured workstations
connected to a bus cable.
Supported by several
hardware and software
venders.
Introduction to Computer Networks

Ring Topology
A frame is sent around the ring
until it reaches its final
destination. If a node wants to
transmit data, it adds the data as
well as the destination address to
the frame.
The frame then continues around
the ring until it finds the
destination node, which takes the
data out of the frame.
Single ring – All the devices on
the network share a single cable
Dual ring – The dual ring
topology allows data to be sent
in both directions.
Introduction to Computer Networks

Mesh Topology
The mesh topology
connects all devices
(nodes) to each other for
redundancy and fault
tolerance.
It is used in WANs to
interconnect LANs.
this type of topology is
commonly used for
wireless networks.
Implementing the mesh
topology is expensive and
difficult.
Introduction to Computer Networks

Network Components
Physical Media
Interconnecting Devices
Computers
Networking Software
Applications
Introduction to Computer Networks

Networking Media
Networking media can
be defined simply as
the means by which
signals (data) are sent
from one computer to
another (either by cable
or wireless means).
Introduction to Computer Networks

Networking Devices
HUB, Switches, Routers,
Wireless Access Points,
Modems etc.
Introduction to Computer Networks

Computers: Clients and Servers


In a client/server
network arrangement,
network services are
located in a dedicated
computer whose only
function is to respond
to the requests of
clients.

The server contains the


file, print, application,
security, and other
services in a central
computer that is
continuously available
to respond to client
requests.
Introduction to Computer Networks

Networking Protocol: TCP/IP


Introduction to Computer Networks

Applications
E-mail
Searchable Data (Web Sites)
E-Commerce
News Groups
Internet Telephony (VoIP)
Video Conferencing
Chat Groups
Instant Messengers
Internet Radio
Introduction to Computer Networks

Thank you

You might also like