Scribd
Upload
763 views

Lecture - 4 Wind Energy

Wind power provides a renewable source of energy and its use is growing rapidly in the US and worldwide. The document discusses various aspects of wind energy systems including typical components of wind turbines, factors that determine wind power potential, efficiency limitations, and power regulation methods. The leading manufacturers of wind turbines are presented along with typical costs.

Uploaded by

mkalbasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
763 views

Lecture - 4 Wind Energy

Wind power provides a renewable source of energy and its use is growing rapidly in the US and worldwide. The document discusses various aspects of wind energy systems including typical components of wind turbines, factors that determine wind power potential, efficiency limitations, and power regulation methods. The leading manufacturers of wind turbines are presented along with typical costs.

Uploaded by

mkalbasi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 30

Engineering of Energy Systems

Wind Energy and Wind Turbine

Wind Power - Introduction

Wind power is good renewable, clean and free source of


energy for power production

Reduce dependence on fossil fuels including imported oils


Reduce emission of greenhouse gas and other pollutant
One major concern is the noise can be improved
Intermittency and variability of the wind

Wind Energy in USA


Wind energy use is about 2% of the domestic energy
consumption
Expected to increase to about 20% over next two decades.
Rates of wind turbine installation has been going up at a
higher rate highest in the world
- 8,500 MW in 2008
- 10,000 MW in 2009
Denmark is the world leader
- produces wind power over 20% of the countrys power

Leading Manufacturers of Wind Turbine


1. Vestas (Denmark) - 35,000 MW
2. Enercon (Germany) - 19,000 MW
3. Gamesa (Spain) 16,000 MW
4. General Electric (USA, Germany) 15,000 MW
5. Siemens (Denmark, Germany) 8,800 MW
6. Suzlon (India) 6,000 MW
7. Nordex (Germany) 5,400 MW
8. Acciona (spain) 4,300 MW
9. Repower (Germany) 3,000 MW
10.Goldwind (china) 2,889
Source: Wikipedia

Typical Cost
1.0 2.5 million per MW for large scale
- Most commercial wind turbine are in the
range of 2 MW
$3,000 5000 per kW in range less than 10kW
- $15,000 - $25,00 for residential home
application

The Wind

The wind is created by the movement of

atmospheric air mass as a results of variation of


atmospheric pressure, which results from the
difference in solar heating of different parts of
the earth surface.
Has different wind systems

Equator receives more solar


radiation than higher latitude
regions.

The curvature of the earth surface


causes oblique interaction with
incoming suns ray with increased
altitude.

Wind Energy Conversion

Wind power describes the process by which the wind is


used to generate mechanical energy or electrical
energy.

Wind energy is the kinetic energy of the large mass of


air over the earth surface.

Wind turbines converts the kinetic energy of the wind


into mechanical energy first and then into electricity if
needed.

The energy in the wind turns propeller like blades around


a rotor shaft.
- The rotor is connected to the main shaft, which
spins a generator to create electricity.

It is the design of the blades that is primarily


responsible for converting the kinetic energy into
mechanical energy.

The rate of change of angular momentum of air at


inlet and outlet of a blade gives rise to the
mechanical torque.
- As the air flows over the aerofoil-section of the
blade, it induces a differential pressure distribution
across the top and bottom surfaces of the blade.

Available Wind Power


The kinetic energy of
a stream of air:
1
E mV 2
2
The kinetic energy of the air
stream available for the
turbine

1
E a V 2
2

= Volume of air parcel


available to the rotor

The air parcel interacting with the rotor per unit


time has a cross-sectional area equal to that of the
rotor ( A T ) and thickness equal to the wind velocity
(V).
Power is the energy per unit and expressed

1
3
P a A T V
2

Major Factors: Air density, area of wind rotor and


wind velocity

The most important factor is Wind Speed


(Power varies cubic power of velocity)
- As the velocity doubles, the power is
increased by 8 times.
- The rotor area is reduced by a factor
of 8.

The selection of site is very critical for the success of


a wind power

Wind Turbine Power and


Efficiency

A wind turbine converts a fraction of the wind energy into


mechanical energy
- A part is transferred to the rotor of the wind turbine ( P)T
- Rest is carried away by passing air

The efficiency is the ratio of actual power developed by wind


turbine rotor to the available wind power
- defined as power coefficient and expressed as

Cp

PT

1
a A T V 3
2

The power coefficient or the power picked


up by the wind turbine rotor is influenced
by many factors:
- profile of the rotor blade
- number of blades
- blade arrangement

Wind Turbine Torque


The thrust force developed by the rotor is
1
F a A TV 2
2
The rotor torque is
1
T a A TV 2R
2

Maximum Theoretical
Torque

Where R is the radius of the rotor

Rotor Torque

The torque developed by the rotor shaft is less


than the maximum theoretical torque and
given in terms of coefficient of torque
as
CT

Tr

1
a A T V 2T
2

Rotor Tip Relative Speed

The rotor power at given wind speed depends on the


relative speed between the rotor tip and the wind.

Higher relative speed between the rotor tip and the wind
leads to poor interaction the rotor and the wind.
- For high speed wind approaching a slower moving
rotor, a portion of the wind passes the rotor without
transferring energy.
- For low speed wind approaching a faster moving
rotor, the wind deflects from the rotor and energy is
lost due to turbulence and vortex shedding.

Relative speed is defined as velocity of rotor


tip and wind speed as
R 2NR
Vrw

V
V

N = Rotor rotational speed, rpm

= Angular velocity

Also, it can be shown that power coefficient


and torque coefficient is related by relative
speed:
CP
R
Vrw
CT
V

Types of Wind Turbine

Horizontal axis
- Primarily of the axial flow types
- requires control mechanism to take
account of variation in wind direction

Vertical axis
- Can handle winds from all directions

Betz Law
States the theoretical limit for the conversion of wind
energy in wind turbine

According to this law maximum possible wind


turbine efficiency is less than 59.3 %

Derived assuming a thin rotor from a fluid at a


speed
Major assumptions:
- Rotor without any hub
- Infinite number of blades with no drag
- axial flow in and out

Sizes of Wind Turbines


Single small turbines , below 100 kW are for
homes, water pumps, telecommunication
dishes, stand alone system remote use, off
grid location, hybrid applications, etc.

Utility scale turbines range in sizes from 100 kW


to MW.
- Larger turbines are grouped together into a
wind farms which provide bulk power to the
electrical grid.

Major Components

Rotor
Blades
Low speed shaft
Gear Box
High speed shaft
Generator
Brakes
Controller

Blades

Aerofoil design

Air flow over the blade develops


lift force and causes the blade to rotate

Gear Transmission
Connects the low speed shaft of the rotor to the
high sped shaft of the generator.
Low Speed Gear
Lower
speed shaft

Higher
Speed
shaft
High Speed
Gear

May need multiple

stages to achieve the


speed ratio.

- Speed of a typical rotor may be


30 rpm to 50 rpm.
- Generator speed may be around
1000 rpm to 1500 rpm.
-Need gear trains in the transmission
line to manipulate the speed according
the requirements of the generator.

Additional Consideration for Gear


System

Heat dissipation, power losses and cooling


Compact design
Weight
Bearing system

Power Regulation
Turbine starts generating
power at lower set wind speed.
Power increases with increase

in wind speed up to a rated


wind speed and rated power.
Power output remains
constant at rated power
between the rated wind speed
and the cut-out speed
Turbines stops operating
speeds higher than the rated
speed due to safety reason.

Turbine Power Control

As the wind speed changes (15 m/s to 20


m/s for example over the rated power
range, the rotor speed also changes (30
rpm to 50 rpm for example).

Need to address the rapid acceleration.


Turbine power is regulated.

Common Power Control Methods

Pitch control
- blade pitch and blade angle of attack is decreased
with wind speed greater than rated speed.
- Wind speed and power output and power out put are
continuous monitored by sensors
- Need sophisticated control mechanism
Stall control
- blades are designed in such a that with increase in
wind speed, the angle of attack increases.
- Pressure variation at the tp and bottom surface
changes causing flow separation and vortex shedding
- kills lift forces and leads to blades stalling
- Need very sophisticated blade aerodynamic design

Active stall-Controlled power regulation


- The blades are pitched to to attain its best
performance.
- As the wind speed exceeds the rated velocity, the
blades are turned in the opposite direction to increase
the angle of attack and forces the blade to stall
region.

Yaw Control
- The rotor is partly pushed away from the wind
direction at higher wind speeds.
- The rotor spin axis is pushed to an angle to the
incoming wind direction

You might also like