Scribd
Upload
96 views

A Project On Testing The Feasibility of Oil Blends On Fuels

The document discusses testing the feasibility of blends of cottonseed oil and soybean oil as alternative fuels. It outlines objectives to check the performance characteristics and optimal blending percentage of biodiesel blends. The methodology involves physical testing and a load test of the blends. Initial work includes ordering blends and contacting organizations for further testing and analysis. References on using cottonseed oil as a biodiesel feedstock are also provided.

Uploaded by

Zeeshan Ali Akbar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
96 views

A Project On Testing The Feasibility of Oil Blends On Fuels

The document discusses testing the feasibility of blends of cottonseed oil and soybean oil as alternative fuels. It outlines objectives to check the performance characteristics and optimal blending percentage of biodiesel blends. The methodology involves physical testing and a load test of the blends. Initial work includes ordering blends and contacting organizations for further testing and analysis. References on using cottonseed oil as a biodiesel feedstock are also provided.

Uploaded by

Zeeshan Ali Akbar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

TESTING THE FEASIBILITY OF BLENDS ON FUEL

A Project
On
TESTING THE FEASIBILITY OF OIL
BLENDS ON FUELS
By:
Raunak .S. Pai Khot
Zeeshan .A. Yahoo
Pranit .P. Waghdhare
Aishwarya .K. Sathe
Guide :
Prof. Dr. Kaushal Prasad
Mechanical Engineering Department
FAMT, Ratnagiri

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

INTRODUCTION
Abiofuelis afuelthat is produced through
biological processes, such as agriculture and
anaerobic digestion, rather than a fuel produced
by geological processes such as those involved in
the formation offossil fuel , such as coal and
petroleum, from prehistoric biological matter.
Biofuels can be derived directly from plants, or
indirectly from agricultural, commercial,
domestic, and/or industrial wastes.

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

NEED FOR BIOFUELS


PROBLEMS WITH
CONVENTIONAL
FUELS

ADVANTAGES OF
BIOFUELS

High prices
Limited stock
Major contribution
to air pollution

Bio-degradable &
renewable
Non-toxic & lesser
Green house
emissions.
Higher Flash Point.

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

OUR OBJECTIVES
To check feasibility of Cotton seed oil and Soya
bean oil blends as an alternative fuel.
To check performance characteristics of these
biodiesel blends.
To find out the blending percentage of these
blends to give optimum performance.
To perform exhaust gas analysis.

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

METHODOLOGY
Physical testing of biodiesel blends
1. Flash point And Fire Point.
2. Specific Gravity at 15 deg Celsius.
3. Viscosity at 40 deg Celsius.
4. Density.
5. Cetane number.
6. Absolute Viscosity.
7. Calorific Value.
.Performance test
1. Load Test

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

PERFORMANCE TEST PARAMETERS


1.
2.
3.
4.
5.
6.
7.
8.

Brake Horse Power vs Load


BSFC vs Load
BSAC vs Load
Brake Thermal Efficiency vs Load
Smoke vs Load
CO vs Load
NOx vs Load
HC vs. Load

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

SHORT TERM WORKING


Contacted IBDC, Pune; but turned out to be unfruitful due to
prolonged and unsatisfactory process by them.
Contacted IIT Guwahati , IISC Bangalore, COEP Pune , MIT Pune for
load test and exhaust gas analysis due to unavailability of exhaust
gas analysis elsewhere.Turned down by MIT and COEP Pune. No
reply from others yet
Contacted ChemTech pune for testing of physical properties of oil .

TIMELINE : JAN15
Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

CURRENT WORK PROGRESS


Confirmed the order of the various blends from
S.V.M. agroprocesses Nagpur with quotation of
650 per litre = 650 x 12=Rs 7,800
14.5 service tax = Rs. 1131
Trasportation= Rs. 3000
Total= Rs.11,931
Contacted ARAI, Pimpri with reference to
availability biodiesel mentioned aforesaid and
expecting a positive response .

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

REFERENCES
Biodiesel Production from Crude Cottonseed
Oil: An Optimization Process Using
Response Surface Methodology
Ben Morgan: Economic Analysis and Feasibility
of Cottonseed Oil as a Biodiesel Feedstock
Demirbas, A. Studies on cottonseed oil biodiesel
prepared in noncatalytic SCF conditions.
Bioresour. Technol., 2008, 99, 1125-1130.
Cui, L.F.; Xiao, G.M.; Xu, B.; Teng, G.Y.
Transesterification of cottonseed oil to biodiesel
by using heterogeneous solid basic catalysts.
Energy Fuel., 2007, 21, 3740-3743.
Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

TESTING THE FEASIBILITY OF BLENDS ON FUEL

THANK YOU

Dept. of Mech. Engg., FAMT, Ratnagiri

13th Feb 2016

You might also like