0% found this document useful (0 votes)
355 views

K02 Network Elements

The document describes the Tellabs 8100 network elements, including network terminating units (NTUs), nodes, and common units. The nodes range from micro nodes with limited capacity and interfaces to cluster nodes with master-slave architecture and expandable capacity. Common units include control units, power supply units, and cross-connection units. The network elements are managed by the Tellabs 8000 network manager and support various PDH trunk interfaces.

Uploaded by

mvasquez2011
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
355 views

K02 Network Elements

The document describes the Tellabs 8100 network elements, including network terminating units (NTUs), nodes, and common units. The nodes range from micro nodes with limited capacity and interfaces to cluster nodes with master-slave architecture and expandable capacity. Common units include control units, power supply units, and cross-connection units. The network elements are managed by the Tellabs 8000 network manager and support various PDH trunk interfaces.

Uploaded by

mvasquez2011
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 26

Tellabs 8100 Network Elements

Objectives
> You will know the Tellabs 8100 network elements
> Network terminating units
> Nodes
> Subracks
> Units and modules

> PDH trunks

Tellabs 8100 Network Elements


All elements managed end-to-end by one system:
the Tellabs 8000 network manager

Tellabs 8160
accelerator node A111
Tellabs 8130
micro node

Tellabs 8110 NTU

Tellabs 8120
mini node

Tellabs 8140
midi node
Tellabs 8150
basic node

Tellabs 8170 cluster node

Tellabs 8110
Network Terminating Unit

Baseband NTUs (modems) are usually customer premises equipment


of the Tellabs 8100 network.

NTUs can also be used for point-to-point connections without the


Tellabs 8100 network.

Tellabs 8150 Basic Node


> The Tellabs 8150 basic node
is the basic building
block of the Tellabs 8100 system.
> It is used in local exchange or
backbone networks or
customer premises networks,
depending on the needed services
and applications.
> The cross-connect port capacity is
64 Mbit/s = 32 * 2048 kbit/s port =
8 * 8448 kbit/s port.

Tellabs 8140 Midi Node


> The Tellabs 8140 midi node
is a Tellabs 8150 basic node
with midi subrack (8 unit slots).
> It is a small flexible access node for
customer premises.
> One-slot wide multifunctional
interface unit XCG is designed for
the Tellabs 8140 midi node.
> It supports mainly the same
interface units as Tellabs 8150
basic node.

Tellabs 8120 Mini Node


> The Tellabs 8120 mini node is functionally
very close to the Tellabs 8150 basic node.
> Common units (control unit, crossconnect unit and power supply unit)
are integrated in the node.
> Mechanical space is the limiting factor.
> 2-4 interface modules with variable
number of interfaces/channels supported.

> The cross-connect port capacity is 64 Mbit/s.


> Due to the limitation of 6 physical interfaces it is impossible
to use all the available capacity.

Tellabs 8130 Micro Node


> The Tellabs 8130 micro node
is especially targeted for
mobile networks.
> Suited to be located at base
station sites where space is
usually limited.

> Four G.704/G.703 2048 kbit/s interfaces


> Optional alarm interface module
(6 inputs, 2 outputs)

> The cross-connect capacity is 64 Mbit/s.

Tellabs 8160 Accelerator Node A111


> The Tellabs 8160 accelerator node
A111 is an access node combining
PDH and SDH technologies.
> PDH features:
> Support for many existing interface units
> Two X-buses and consequently
2 x 64 Mbit/s = 128 Mbit/s capacity
> Applications: e.g. DSLAM

> Cross-connections are done only at


TS level, 64 kbit/s

Tellabs 8170 Cluster Node


> Tellabs 8170 cluster node is built in a master-slave architecture.
> a master subrack and 1-8 slave subracks

> The maximum cross-connect port capacity is


8 * 64 Mbit/s = 512 Mbit/s = 256 * 2048 kbit/s port = 64 * 8448 kbit/s
> Each slave subrack adds 64 Mbit/s to the
cross-connect port capacity.
> Cross-connections are done only at
TS level, 64 kbit/s.

> It can be expanded without disturbing


the existing traffic.

End-to-End Connections
R&D
Router
G
M
H

V G
C M
M H

HQ
G
M
H

PBX

V
C
M

Router

PBX

Factory
Tellabs 8100 trunks

G
M
H

V
C
M

PBX

Router

Subracks and Common Units

RESERVED FOR
INTERFACE UNITS
(6 UNIT SLOTS)

RESERVED FOR INTERFACE UNITS


(11..13 5T- SLOTS)

XC
G

PF
PA U-A
U- o
5T r

PF
UA
PF
UB

SX
USX A/B
U- /C
SC A/B
U /C

Single Subrack and Midi Subrack

14 15 16

SINGLE SUBRACK
with SXU-A, SXU-B or SXU-C

MIDI SUBRACK with XCG

SX
U
SX -A/
U B
SC -A/ /C
U B/ C

PF
U
PF -A
UB

Double Subrack

RESERVED FOR INTERFACE UNITS


(11..13 5T- SLOTS)

14 15 16

RESERVED FOR INTERFACE UNITS


(14..15 5T- SLOTS)

PF
U
PF -A
UB

17 18

32

DOUBLE SUBRACK with


SXU-A, SXU-B or SXU-C

Tellabs 8160 A111 Subrack


> For Tellabs 8160 A111 nodes
> Subrack with two shelves
> Differs from double subrack

Master Subrack
> For Tellabs 8170 cluster node
> Motherboard is different than
in the double subrack.

> One to eight slaves

Tellabs 8100 Units


> Several unit types for
different kind of data

> Tellabs 8100 unit


contains: main unit,
interface modules and
power supply module.

> Separate power supply


module is required for
each interface unit.

Tellabs 8100 Common Units

> Example of Tellabs 8150 basic node with single subrack

Tellabs 8100 Common Units


> Control Units
>
>
>
>

SCU
SCU-H
XCG
CCU

Tellabs 8100 Common Units


> Power Supply Units
> PFU-A
> PFU-B
> PAU-5T
> PAU-10T

Tellabs 8100 Common Units


> Cross-Connection Units
> SXU-A
> SXU-B
> SXU-C
> CXU-M
> CXU-A
> CXU-S

Network Hierarchy
> Different node types for different levels

Backbone
level
Intermediate/
Consolidation level
Access level

PDH Trunk Types


> G704 2M
> G704 8M
> 1544 kbit/s
> G704 mod
n x 64 kbit/s

> Split trunk


> 1+1 protected

Cross-Connection Summary

Summary

Answer the questions in your material!

X-bus Capacities
Capacity
32 kbit/s
2 Mbit/s
30 Mbit/s
64 Mbit/s
128 Mbit/s
320 Mbit/s

Tellabs 8120

Tellabs 8130

Tellabs 8150

Tellabs 8160

Tellabs 8170

You might also like