Scribd
Upload
69 views

05 - Building Design and Drawing - 2

The document discusses the components of building drawings, including scales, conventions, symbols, projections, and line work. It provides details on interpreting engineering drawings and the drawing process. The key steps in the drawing process are developing line plans, elevations, sections, and detailed plans. It also discusses preparing a line plan, projecting plans, elevations and sections, and creating detailed drawings. An example problem is given to design a small house and draw the plan, section and elevation.

Uploaded by

Darshan Chauhan
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
69 views

05 - Building Design and Drawing - 2

The document discusses the components of building drawings, including scales, conventions, symbols, projections, and line work. It provides details on interpreting engineering drawings and the drawing process. The key steps in the drawing process are developing line plans, elevations, sections, and detailed plans. It also discusses preparing a line plan, projecting plans, elevations and sections, and creating detailed drawings. An example problem is given to design a small house and draw the plan, section and elevation.

Uploaded by

Darshan Chauhan
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 31

Building Drawing - 2

Interpretation of engineering drawings


Components of building drawing
Process

Interpretation of engineering
drawings

Scales
Conventions and Symbols
Projections
Line work

Scales

Conventions

Symbols ..contd

Line work

Projections
Third angle
First angle

One Room Building

The following few slides have been taken from Intermediate Vocational Course, 2nd Year : CIVILENGINEERING DRAWING (For the Course of Water Supply and Sanitary Engineering) Author :
Sri P. Venkateswara Rao, State Institute of Vocational Education Andhra Pradesh, Hyderabad.

A typical drawing sheet

Drawing process

Idea or problem
Line plans
Elevation and Section
Detailed plans
Other detailed drawings
Specifications

Preparing a Line Plan


The plan drawn with single line showing different positions of rooms
with dimensions excluding the thickness of walls is called Line Plan.

After determining the plinth area and shape of building, draw the
North line is a corner to facilitate the orientation of different rooms.

Projection of Plan

Top view of lower part of a building projected on a horizontal


plane, by assuming it to be cut by horizontal cutting plane at a
height of 1.5m from plinth level is called a plan.

Projection of Elevation & Section


Projection of Elevation:
The front view projected on a vertical plane is called front
elevation. When the object is looked at from side then it is called
side view.
Projection of Section:
A view obtained on a vertical plane when the building is assumed
to be cut by it is called a section.

Detailed Drawing
A drawing showing a detailed plan section and elevation along
with other necessary data is called a detailed drawing.
While drawing detailed drawing, following should be drawn:

North line
References
Scale
Dimension and heights of rooms.
Lintels over doors and windows and other openings.

Development of a PLAN
SECTION and ELEVATION

DIMENSIONING

Problem 1
Design a small house of built up area maximum 40 m 2
One bedroom, one living room, kitchen and a bath cum
toilet and a verandah
Choose foundation, floor, wall and roof type
Draw Plan, section and Elevation

You might also like