Scribd
Upload
140 views

Chapter 06

The document discusses guidelines for designing addressing and naming models in network design. It covers topics like using structured hierarchical models, public vs private addressing, static vs dynamic addressing, subnetting, Classful vs Classless addressing, IPv4 and IPv6 addressing formats.

Uploaded by

Kamarul Akmal
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
140 views

Chapter 06

The document discusses guidelines for designing addressing and naming models in network design. It covers topics like using structured hierarchical models, public vs private addressing, static vs dynamic addressing, subnetting, Classful vs Classless addressing, IPv4 and IPv6 addressing formats.

Uploaded by

Kamarul Akmal
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 35

Top-Down Network Design

Chapter Six
Designing Models for Addressing and Naming

Copyright 2004 Cisco Press & Priscilla Oppenheimer

Guidelines for Addressing and


Naming
Use a structured model
Assign addresses and names hierarchically
Decide in advance if you will use
Central or distributed authority for addressing
and naming
Public or private addressing
Static or dynamic addressing and naming

Advantages of Structured Models


for Addressing & Naming
It makes it easier to

Read network maps


Operate network management software
Recognize devices in protocol analyzer traces
Meet goals for usability
Design filters on firewalls and routers
Implement route summarization

Public IP Addresses
Managed by the Internet Assigned Numbers
Authority (IANA)
Users are assigned IP addresses by Internet
service providers (ISPs).
ISPs obtain allocations of IP addresses from
their appropriate Regional Internet Registry
(RIR)

Regional Internet Registries


(RIR)
APNIC (Asia Pacific Network Information Centre)
Asia/Pacific Region
ARIN (American Registry for Internet Numbers)
North America and Sub-Sahara Africa
LACNIC (Regional Latin-American and Caribbean IP
Address Registry)
Latin America and some Caribbean Islands
RIPE NCC (Rseaux IP Europens) Europe, the
Middle East, Central Asia, and African countries
located north of the equator

Private Addressing
10.0.0.0 10.255.255.255
172.16.0.0 172.31.255.255
192.168.0.0 192.168.255.255

Criteria for Using Static Vs.


Dynamic Addressing

The number of end systems


The likelihood of needing to renumber
The need for high availability
Security requirements
The importance of tracking addresses
Whether end systems need additional
information
(DHCP can provide more than just an address)

The Two Parts of an IP Address


32 Bits

Prefix
Prefix Length

Host

Prefix Length
An IP address is accompanied by an
indication of the prefix length
Subnet mask
/Length

Examples
192.168.10.1 255.255.255.0
192.168.10.1/24

Subnet Mask
32 bits long
Specifies which part of an IP address is the network/subnet
field and which part is the host field
The network/subnet portion of the mask is all 1s in binary.
The host portion of the mask is all 0s in binary.
Convert the binary expression back to dotted-decimal notation for
entering into configurations.

Alternative
Use slash notation (for example /24)
Specifies the number of 1s

Subnet Mask Example


11111111 11111111 11111111 00000000
What is this in slash notation?
What is this in dotted-decimal notation?

Another Subnet Mask Example


11111111 11111111 11110000 00000000
What is this in slash notation?
What is this in dotted-decimal notation?

One More Subnet Mask Example


11111111 11111111 11111000 00000000
What is this in slash notation?
What is this in dotted-decimal notation?

Designing Networks with


Subnets
Determining subnet size
Computing subnet mask
Computing IP addresses

Addresses to Avoid When


Subnetting

A node address of all ones (broadcast)


A node address of all zeros (network)
A subnet address of all ones (all subnets)
A subnet address of all zeros (confusing)
Cisco IOS configuration permits a subnet
address of all zeros with the ip subnet-zero
command

Practice

Network is 172.16.0.0
You want to divide the network into subnets.
You will allow 600 nodes per subnet.
What subnet mask should you use?
What is the address of the first node on the
first subnet?
What address would this node use to send to
all devices on its subnet?

More Practice
Network is 172.16.0.0
You have eight LANs, each of which will be its
own subnet.
What subnet mask should you use?
What is the address of the first node on the first
subnet?
What address would this node use to send to all
devices on its subnet?

One More

Network is 192.168.55.0
You want to divide the network into subnets.
You will have approximately 25 nodes per subnet.
What subnet mask should you use?
What is the address of the last node on the last
subnet?
What address would this node use to send to all
devices on its subnet?

IP Address Classes
Classes are now considered obsolete
But you have to learn them because
Everyone in the industry still talks about them!
You may run into a device whose configuration
is affected by the classful system

Classful IP Addressing
Class

First
Few Bits

First Byte

Prefix
Length

Intent

A
B
C
D
E

0
10
110
1110
1111

1-126*
128-191
192-223
224-239
240-255

8
16
24
NA
NA

Very large networks


Large networks
Small networks
IP multicast
Experimental

*Addresses starting with 127 are reserved for IP traffic local to a host.

Division of the Classful Address


Space
Class

Prefix
Length

Number of Addresses
per Network

A
B
C

8
16
24

224-2 = 16,777,214
216-2 = 65,534
28-2 = 254

Classful IP is Wasteful

Class A uses 50% of address space


Class B uses 25% of address space
Class C uses 12.5% of address space
Class D and E use 12.5% of address space

Classless Addressing
Prefix/host boundary can be anywhere
Less wasteful
Supports route summarization
Also known as

Aggregation
Supernetting
Classless routing
Classless inter-domain routing (CIDR)
Prefix routing

Supernetting
172.16.0.0

172.17.0.0

172.18.0.0
Branch-Office Router
172.19.0.0

Branch-Office Networks

Move prefix boundary to the left


Branch office advertises 172.16.0.0/14

Enterprise Core
Network

172.16.0.0/14 Summarization
Second Octet in Decimal
in Binary

Second Octet

16

00010000

17

00010001

18

00010010

19

00010011

Discontiguous Subnets
Area 0
Network
192.168.49.0

Router A
Area 1
Subnets 10.108.16.0 10.108.31.0

Router B
Area 2
Subnets 10.108.32.0 10.108.47.0

A Mobile Host

Router A

Router B

Subnets 10.108.16.0 10.108.31.0

Host 10.108.16.1

IPv6 Aggregatable Global


Unicast Address Format
3

13

FP

TLA
ID

24

16

64 bits

RES

NLA
ID

SLA
ID

Interface ID

Public topology

Site
Topology

FP Format Prefix (001)


TLA ID
Top-Level Aggregation Identifier
RES Reserved for future use
NLA ID
Next-Level Aggregation Identifier
SLA ID
Site-Level Aggregation Identifier
Interface ID Interface Identifier

Upgrading to IPv6
Dual stack
Tunneling
Translation

Guidelines for Assigning Names


Names should be
Short
Meaningful
Unambiguous
Distinct
Case insensitive

Avoid names with unusual characters


Hyphens, underscores, asterisks, and so on

Domain Name System (DNS)


Maps names to IP addresses
Supports hierarchical naming
example: frodo.rivendell.middle-earth.com

A DNS server has a database of resource records (RRs)


that maps names to addresses in the servers zone of
authority
Client queries server
Uses UDP port 53 for name queries and replies
Uses TCP port 53 for zone transfers

DNS Details
Client/server model
Client is configured with the IP address of a
DNS server
Manually or DHCP can provide the address

DNS resolver software on the client


machine sends a query to the DNS server.
Client may ask for recursive lookup.

DNS Recursion
A DNS server may offer recursion, which allows the server
to ask other servers
Each server is configured with the IP address of one or more root
DNS servers.

When a DNS server receives a response from another


server, it replies to the resolver client software. The server
also caches the information for future requests.
The network administrator of the authoritative DNS server for a
name defines the length of time that a non-authoritative server
may cache information.

Summary
Use a systematic, structured, top-down
approach to addressing and naming
Assign addresses in a hierarchical fashion
Distribute authority for addressing and
naming where appropriate
IPv6 looms in our future

Review Questions
Why is it important to use a structured model
for addressing and naming?
When is it appropriate to use IP private
addressing versus public addressing?
When is it appropriate to use static versus
dynamic addressing?
What are some approaches to upgrading to
IPv6?

You might also like