Scribd
Upload
16 views

Interconnect Network Topologies

This document discusses different network topologies and their characteristics. It describes regular topologies like linear arrays, rings, meshes, tori and hypercubes. It also covers irregular topologies and indirect networks like Clos networks and fat trees. For each topology, it discusses properties like diameter, nodal degree and bisection bandwidth that characterize the performance of the network. It explains how nodes are identified and routing is done in different regular topologies.

Uploaded by

helloitsame
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
16 views

Interconnect Network Topologies

This document discusses different network topologies and their characteristics. It describes regular topologies like linear arrays, rings, meshes, tori and hypercubes. It also covers irregular topologies and indirect networks like Clos networks and fat trees. For each topology, it discusses properties like diameter, nodal degree and bisection bandwidth that characterize the performance of the network. It explains how nodes are identified and routing is done in different regular topologies.

Uploaded by

helloitsame
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 23

Interconnect Network

Topologies

Characteristics of a network
Topology (what)
Physical interconnection structure of the network
graph.
Physically limits the performance of the networks.

Routing algorithm (which)


Restricts the set of paths that messages can follow.

Switching strategy (how)


How data in a message traverses a route (passing
routers)

Flow control mechanism (when)


When a message or portions of it traverse a route
What happens when traffic encountered

Topology
How the components are connected.
Important properties
Diameter: maximum distance between any two
nodes in the network (hop count, or # of links).
Nodal degree: how many links connect to each
node.
Bisection bandwidth: The smallest bandwidth
between half of the nodes to another half of
the nodes.

A good topology: small diameter, small


nodal degree, large bisection bandwidth.

Topology
Regular topologies
Nodes are connected with some kind of
patterns.
The graph has a structure.

Nodes are identified by coordinates.


Routing can usually pre-determined by the
coordinates of the nodes.

Irregular topologies
Nodes are connected arbitrarily.
The graph does not have a structure, e.g. internet
More extensible in comparison to regular topology.

Usually use variations of shortest path routing.

Linear Arrays and Rings


Linear array

Ring (torus)

Short wire torus

Diameter = ?, nodal = ? Bisection bandwidth = ?

Describing linear array and


ring
Array: nodes are numbered from 0, 1,
, N-1
Node i is connected to node i+1,
0<=i<=N-2

Ring: nodes are numbered from 0, 1,


, N-1
Node I is connected to node (i+1) mod
N, for all 0<=i<=N-1

Multidimensional Meshes
and Tori

d-dimensional array/torus
N = k_{d-1} x k_{d-2} x x k_0
Each node is described by a d-vector of coordinate
Node (i_{d-1} x i_{d-2} x x d_0) is connected
to ???

More about multidimensional mesh and tori


d-dimension k-ary mesh (torus)
Each node is described by a d-vector of
coordinates.
The value of each item in the vector is
between 0 and d_i-1.

Diameter = ?
Nodal degree = ?
Bisection bandwidth = ?

Hypercubes

Also call binary n-cubes. # of nodes = N = 2^n


Each node is described by its binary representation.
There is a link between two nodes whose binary representations
differ by one bit.

Diameter=? Nodal degree = ? Bisection bandwidth = ?

K-ary n-cube (n-dimensional,


k-ary mesh/torus)
Extended from binary (hypercube) to k-ary
Each dimension has k elements, n dimensions
Each node is identified by a k-based number (n
digits).
Dimension order routing

4-ary 0-cube
4-ary 1-cube

4-ary 2-cube

4-ary 3-cube

Trees

Fixed degree, log(N) diameter, O(1)


bisection bandwidth.
Routing: up to the common ancestor
than go down.

Irregular topology
Irregular topology does not any
special mathmetic properties
Can be expanded in any way.
No easy way for routing: routes need to
be computed like in the Internet.
Routes can usually be determined in a
regular network by using the coordinates of
the source and destination.

Direct and indirect networks


All the previously discussed networks are
direct networks in that the compute nodes
are directly attached to the nodes in the
topology.
An example mesh system.

Each switch is a 5x5 switch

Indirect networks
Compute nodes are not directly
attached to each switch, but are
rather attached to the whole
network.
Using a central interconnect to connect
all compute nodes
The network emulate the cross-bar
switch functionality.

Fully connected network

Different organizations:
Connected by one switch (crossbar switch), connecting
all nodes, connected with a crossbar.

All permutation communication (each node sends


one message and receives one message) can be
realized.

Multistage interconnection
networks (MIN)

Try to emulate the cross-bar connection.


Realizing permutation without blocking
Using smaller cross-bar(2x2, 4x4) switches
as the building block. Usually O(Nlg(N))
switches (lg(N) stages.

Multi-stage networks
examples

(a) An 8-input butterfly network

(b) An 8-input Benes network

MINs can be blocking or non-blocking


Blocking: there exist some permutation that results in link
contention.
Non-blocking: any permutation can be realized without link
contention

Butterfly network is blocking.


Benes network is non-blocking.

Clos Network
Three stages: ingress
stage, middle stage,
and egress stage
Ingress/egress stage
has r n X m switches
Middle stage has m r
X r switches
Each switch at
ingress/egress stage
connects to all m
middle switches (one
port to each switch).

Clos Network
Clos network is
non-blocking
when m>=2n-1.

Fat-Trees
Fatter links (really more of them) as
you go up, so bisection BW scales
with N
Not practical, root is an NxN switch
Fat Tree

Practical Fat-trees

Use smaller switches to approximate large switches.


Connectivity is reduced, but the topology is not
implementable
Most commodity large clusters use this topology. Also
call constant bisection bandwidth network (CBB)

Clos network and fat-tree


(folded Clos)

A generic 2-level fat-tree


(folded Clos)
A generic 3-stage Clos network

Physical constraint on
topologies
Number of dimensions.
2 or 3 dimensions
Can be layout physically
Short wires, easy to build
Many hops, low bisection bandwidth

>=4 dimensions
Harder to build, longer wires
Fewer hops, better bisection bandwidth

K-ary n-cubes provide a good framework


for comparison.

You might also like