Scribd
Upload
230 views

Fluid Mechanics (Chapter 1)

This document provides an introduction to fluid mechanics concepts including properties of fluids. It discusses density, specific gravity, viscosity, surface tension, and classifications of fluids as Newtonian or non-Newtonian. Examples are provided to demonstrate calculations of density, specific weight, specific gravity, and kinematic viscosity for various fluids. Key concepts are defined such as viscosity being a measure of internal fluid friction, and surface tension arising from unbalanced cohesive forces at fluid surfaces. Newtonian fluids obey Newton's viscosity law where viscosity is independent of shear rate, whereas non-Newtonian fluids do not follow this relationship.

Uploaded by

alsahari
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
230 views

Fluid Mechanics (Chapter 1)

This document provides an introduction to fluid mechanics concepts including properties of fluids. It discusses density, specific gravity, viscosity, surface tension, and classifications of fluids as Newtonian or non-Newtonian. Examples are provided to demonstrate calculations of density, specific weight, specific gravity, and kinematic viscosity for various fluids. Key concepts are defined such as viscosity being a measure of internal fluid friction, and surface tension arising from unbalanced cohesive forces at fluid surfaces. Newtonian fluids obey Newton's viscosity law where viscosity is independent of shear rate, whereas non-Newtonian fluids do not follow this relationship.

Uploaded by

alsahari
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 31

EAT 252/4

FLUID MECHANICS
ENGINEERING
CHAPTER 1
INTRODUCTION
(PROPERTIES OF FLUID)

Contents
1.0

Introduction

1.1 Density and Specific Gravity,


Specific Weight
1.2

Viscosity

1.3

Surface Tension

1.4

Newtonian & Non-Newtonian Fluids

Introduction
This chapter will begin with several concepts, definition,
terminologies and approaches which should be understood by
the students.

Then, it introduces the student with typical properties of fluid


which are then being used extensively in the next chapters for
example pressure, velocity, density and viscosity.

Some of these can be used to classify type and characteristic


of fluid, such as whether a fluid is incompressible or not or
whether the fluid is Newtonian or non-Newtonian.

Introduction
Fluid mechanics is a division in applied mechanics
related to the behaviour of liquid or gas which is
either in rest or in motion.
The study related to a fluid in rest or stationary is
referred to fluid static, otherwise it is referred to as
fluid dynamic.
Fluid can be defined as a substance which can deform
continuously when being subjected to shear stress at
any magnitude.
In other words, it can flow
continuously as a result of shearing action. This
includes any liquid or gas.

Cont..
Thus, with exception to solids, any other matters can
be categorised as fluid. In microscopic point of view,
this concept corresponds to loose or very loose bonding
between molecules of liquid or gas, respectively.
Examples of typical fluid used
applications are water, oil and air.

in

engineering

An analogy of how to understand different bonding in


solids and fluids is depicted in Fig.1.1

Figure 1.1
Free surface

k
k

k
k

(a) Solid

(b) Liquid

(c) Gas

For solid, imagine that the molecules can be fictitiously linked to


each other with springs.
In fluid, the molecules can move freely but are constrained
through a traction force called cohesion. This force is
interchangeable
from
one
molecule
to
another.
For gases, it is very weak which enables the gas to disintegrate
and move away from its container.
For liquids, it is stronger which is sufficient enough to hold the
molecule together and can withstand high compression, which is
suitable for application as hydraulic fluid such as oil. On the
surface, the cohesion forms a resultant force directed into the
liquid region and the combination of cohesion forces between
adjacent molecules from a tensioned membrane known as free
surface.

Density,
Definition: mass per unit volume,
slightly affected by changes in temperature and pressure.

Density

= mass/volume

= m/V

Units: kg/m3
Typical values:
Water = 1000 kg/m3; Air = 1.23 kg/m3

Density of Ideal Gas


Equation of state: An equation that relates the
pressure, temperature and density (or specific
volume) of a substance.
Ideal gas equation:

PV = nRT
Where,
R = 8.314 J/mol.K = 0.287 kPa.m3/kg.K
Question:
Write down the equation above in term of density.

Specific Volume,
Specific Volume is volume per unit mass.
Given,
V = 12 m3
m = 3 kg
Then,
= m/V = 3/12 = 0.25 kg/m3
= 1/ = 4 m3/kg

Specific Weight
Definition: weight of the fluid per unit volume
Arising from the existence of a gravitational force, The
relationship and g can be found using the following:
Since
= m/V
therefore
= g
Units: N/m3
Typical values:
Water = 9814 N/m3;

Air = 12.07 N/m3

Specific Gravity
(S.G.)
The specific gravity (or relative density) can be defined
in two ways:
Definition 1: A ratio of the density of a liquid to the
density of water at standard temperature and pressure
(STP) (20 C, 1 atm), or
Definition 2: A ratio of the specific weight of a liquid to
the specific weight of water at standard temperature
and pressure (STP) (20C, 1 atm),
liquid
liquid
SG

water @ STP water @ STP

Unit: ?

Example 1.1
A reservoir of oil has a mass of 825 kg. The reservoir
has a volume of 0.917 m3. Compute the density,
specific weight, and specific gravity of the oil.
Solution:
oil

mass m 825

900kg/ m3
volume V 0.917

weight mg

g 900 9.81 8829N / m3


volume V
oil
900
SGoil

0.9
w @ STP
1000

oil

Example 1.2
Determine the density, specific gravity
and mass of the air in a room whose
dimensions are 4 x 5 x 6 m at 100 kPa
and 25 C?

Example 1.2 (Solution)

Viscosity
Viscosity, , is a measure of resistance to fluid flow as a result of
intermolecular cohesion. In other words, viscosity can be seen as
internal friction to fluid motion which can then lead to energy loss.
Different fluids deform at different rates under the same shear
stress. The ease with which a fluid pours is an indication of its
viscosity. Fluid with a high viscosity such as syrup deforms more
slowly than fluid with a low viscosity such as water. The viscosity is
also known as dynamic viscosity.
Units: N.s/m2 or kg/ms
Typical values:
Water = 1.14x10-3 kg/ms;

Air = 1.78x10-5 kg/ms

Kinematic Viscosity
Definition: is the ratio of the viscosity to the density;

will be found to be important in cases in which significant viscous and


gravitational forces exist.
Units: m2/s
Typical values:
Water = 1.14x10-6 m2/s;

Air = 1.46x10-5 m2/s;

In general,
viscosity of liquids with temperature, whereas
viscosity of gases with

in temperature.

Surface Tension
Surface tension coefficient s can be defined as the intensity of
intermolecular traction per unit length along the free surface of a
fluid, and its SI unit is N/m.
The surface tension effect is caused by unbalanced cohesion forces
at fluid surfaces which produce a downward resultant force which
can physically seen as a membrane.
The coefficient is inversely proportional to temperature and is also
dependent on the type of the solid interface.
For example, a drop of water on a glass surface will have a different
coefficient from the similar amount of water on a wood surface.

Surface Tension
XNNXN

Liquid droplets behave like


small spherical balloons filled
with liquid, and the surface of
the liquid acts like stretched
elastic membrane under tension.
The pulling force that causes
this is:
- due to the attractive forces
between molecules
-Called surface tension.
Attractive force on surface
molecule is not symmetric.
A repulsive forces from interior
molecules causes the liquid to
minimize its surface area and
attain a spherical shape.

Newtonian and Non-Newtonian


Fluid
Fluid

obey

Newtons law
of viscosity

refer

Newtonian fluids

Newtons law of viscosity is given by;

du

dy

(1.1)

= shear stress

= viscosity of fluid
du/dy = shear rate, rate of strain or velocity gradient
The viscosity is a function only of the condition of the fluid, particularly its
temperature.
The magnitude of the velocity gradient (du/dy) has no effect on the magnitude of .

Newtonian and NonNewtonian Fluid


Do not obey

Fluid

Newtons law
of viscosity

Non- Newtonian
fluids

The viscosity of the non-Newtonian fluid is dependent on the


velocity gradient as well as the condition of the fluid.
Newtonian Fluids

a linear relationship between shear stress and the velocity gradient (rate
of shear),
the slope is constant
the viscosity is constant

non-Newtonian fluids

slope of the curves for non-Newtonian fluids varies

If the gradient m is constant, the fluid is termed as Newtonian fluid.


Otherwise, it is known as non-Newtonian fluid. Fig.1.5 shows
several Newtonian and non-Newtonian fluids.

Summary of Chapter 1
Introduction of Fluid Mechanics
(Reading)

Calculation:
Properties of fluid; , , , S.G
Viscosity, and

Surface Tension, Newtonian & Non-Newtonian


fluid (Reading)

Example 1.3 (Tips):


Test 1
(Academic Session 2014/15, Sem 1)

Q1 (a) :
Calculation from Chapter 1, Properties of
fluid, density, specific weight, specific
gravity, viscosity
(7 M)
Q1(b)
Reading: from Chapter 1
(8 M)

Example 1.3

Test 1
(Academic Session 2014/15, Sem 1)
(a)

Calculate the volume of mercury (S.G. =


13.54) that would have the same mass as 0.020
m3 of castor oil, which has a specific weight
of 9.42 kN/m3. If the mercury has dynamic
viscosity of 1.53 x 10-3 Pa.s, calculate the
kinematic viscosity for the mercury.
(7 Marks/ Markah)

(b)

Explain what is meant by Newtonian and NonNewtonian fluids.


(8 Marks/ Markah)

Students Average:
Q1: 4 M; Q2: 1.8 M

Example 1.3
(Solution)

Example 1.3
(Solution)

Example 1.4:
Test 1
(Academic Session 2013/14, Sem 1)
1.

A cylindrical can 150 mm in diameter is filled to


a depth of 100 mm with a fuel oil. The oil has a
mass 1.56 kg. Calculate its density, specific
weight and specific gravity.
[6 M]

2.

By using suitable example, explain what is mean by


fluid viscosity.
[4 M]

3.

By using a simple sketch, explain what is surface


tension.
[5 M]

Example 1.4
(Solution)

Example 1.4
(Solution)

Example 1.4
(Solution)

You might also like