Scribd
Upload
82 views

CCNA 640-802: Chapter 2: Introduction To TCP/IP

This chapter covers the TCP/IP model and network layer protocols. It discusses the four layers of the TCP/IP model - process/application layer, host-to-host layer, internet layer, and network access layer. It describes protocols like TCP, UDP, IP, ICMP, ARP, and addresses, including private addressing classes. The chapter also includes diagrams of protocol headers and addresses, as well as review questions.

Uploaded by

Joy
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
82 views

CCNA 640-802: Chapter 2: Introduction To TCP/IP

This chapter covers the TCP/IP model and network layer protocols. It discusses the four layers of the TCP/IP model - process/application layer, host-to-host layer, internet layer, and network access layer. It describes protocols like TCP, UDP, IP, ICMP, ARP, and addresses, including private addressing classes. The chapter also includes diagrams of protocol headers and addresses, as well as review questions.

Uploaded by

Joy
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 24

CCNA 640-802

Chapter 2: Introduction to TCP/IP

Chapter 2 Objectives
The CCNA Topics Covered in this chapter include:
TCP/IP and the DoD Model
Process/Application Layer
Host-to-Host Layer
Internet Layer
Network Access
IP Addressing
Class A
Class B
Class C
Private Addressing

TCP/IP and the DoD Model


The figure shows a comparison of the DoD model and the OSI
reference model. As you can see, the two are similar in concept,
but each has a different number of layers with different names.

The TCP/IP Protocol Suite


The DoD and OSI models are alike in design and
concept and have similar functions in similar
layers.

Process/Application Layer
This section describes different applications and services typically used in
IP networks. The following protocols and applications are discussed:

Telnet
FTP
TFTP
HTTP
SMTP
LPD
X Window
SNMP
DNS
DHCP
5

Host to Host Layer


The main purpose of the Host-to-Host layer
is to shield the upper-layer applications
from the complexities of the network.
This layer says to the upper layer, Just give
me your data stream, with any
instructions, and Ill begin the process of
getting your information ready to send.
The following sections describe the two
protocols at this layer:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
6

TCP
The figure shows the different fields
within the TCP header.

UDP
This figure clearly illustrates UDPs markedly low
overhead as compared to TCPs hungry usage.

Key concepts of Host to Host


Protocols
TCP
UDP
More bandwidth
Less bandwidth
consumption
consumption
Reliable
Unreliable
Connection-oriented
Connectionless
Virtual circuit
Low overhead
Acknowledgments
No acknowledgment
Windowing flow control
No windowing or flow
control

Port Numbers
Port number examples for TCP and UDP

10

Key Protocols and Port


Numbers
TCP
Telnet 23
SMTP 25
HTTP 80
FTP
21
DNS
53
HTTPS 443

UDP
SNMP 161
TFTP 69
DNS 53

11

Internet Layer
IP Header

12

Internet Layer
Protocol Field in IP Header

13

Internet Layer
Protocol Field in IP Header

Protocol
Protocol Number
ICMP
1
IP in IP (tunneling)
4
IGRP
9
EIGRP
88
OSPF
89
IPv6
GRE
Layer 2 tunnel (L2TP)

41
47
115
14

Internet Layer
ICMP

Internet Control Message Protocol (ICMP)


works at the Network layer and is used by IP
for many different services.
ICMP is a management protocol and
messaging service provider for IP.
Its messages are carried as IP datagrams.
ICMP packets have the following
characteristics:
They can provide hosts with information about
network problems.
They are encapsulated within IP datagrams.
15

Internet Layer
ICMP
E0 of LAB_B goes down. What happens?

16

Internet Layer
ARP
ARP resolves IP addresses to Ethernet (MAC) addresses.

17

Internet Layer
RARP

18

IP Addressing
An IP address is a numeric identifier assigned
to each machine on an IP network.
It designates the specific location of a device
on the network.
IP addressing was designed to allow hosts on
one network to communicate with a host on a
different network regardless of the type of
LANs the hosts are participating in.

19

IP Terminology
BIT: A bit is one digit, either a 1 or a 0.
BYTE: A byte is 7 or 8 bits, depending on whether parity is used.
For the rest of this chapter, always assume a byte is 8 bits.
OCTET: An octet, made up of 8 bits, is just an ordinary 8-bit binary
number. In this chapter, the terms byte and octet are completely
interchangeable.
Network address: This is the designation used in routing to send
packets to a remote networkfor example, 10.0.0.0, 172.16.0.0,
and 192.168.10.0.
Broadcast address: The address used by applications and hosts
to send information to all nodes on a network is called the
broadcast address.
20

Network Addressing
Subdividing an IP address into a network and node address is
determined by the class designation of ones network. This figure
summarizes the three classes of networks

21

Reserved Addressing
Address
Network address of all 0s

Function
Interpreted to mean this network or
segment.
Network address of all 1s
Interpreted to mean all networks.
Network 127.0.0.1
Reserved for loopback tests.
Node address of all 0s
Interpreted to mean network address or
any host on specified network.
Node address of all 1s
Interpreted to mean all nodes on the
specified network
Entire IP address set to all 0s Used by Cisco routers to designate the
default route. Could also mean any
network.
Entire IP address set to all 1s (same as Broadcast to all nodes on the
current network; 255.255.255.255)
sometimes called an all 1s broadcast or
limited broadcast

22

Private Addressing
Address Class
Class A
Class B
Class C

Reserved Address Space


10.0.0.0 through 10.255.255.255
172.16.0.0 through 172.31.255.255
192.168.0.0 through 192.168.255.255

23

Written Labs and Review


Questions
Open your books and go through all the
written labs and the review questions.
Review the answers in class.

24

You might also like