Scribd
Upload
116 views

1 Introduction To Heat Transfer: Prepared by

This document provides an introduction to heat transfer, including definitions, modes of heat transfer, and examples. It discusses the three main modes of heat transfer: conduction, convection, and radiation. For each mode, it provides the definition, governing equations, and examples to illustrate key concepts. The modes of heat transfer contribute to cooling of a hot coffee container placed in a cooler room. An optimal container design would maximize or minimize various heat transfer processes to slow the cooling rate.

Uploaded by

Fatinnnnnn
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
116 views

1 Introduction To Heat Transfer: Prepared by

This document provides an introduction to heat transfer, including definitions, modes of heat transfer, and examples. It discusses the three main modes of heat transfer: conduction, convection, and radiation. For each mode, it provides the definition, governing equations, and examples to illustrate key concepts. The modes of heat transfer contribute to cooling of a hot coffee container placed in a cooler room. An optimal container design would maximize or minimize various heat transfer processes to slow the cooling rate.

Uploaded by

Fatinnnnnn
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 17

CHE 463 HEAT TRANSFER

CHAPTER 1
INTRODUCTION TO
HEAT TRANSFER
Prepared by
NURHASLINA CHE RADZI
FKK, UITM

In this chapter we will learn


What is heat transfer?
How is heat transferred?
Why heat transfer is important?

Definition:
Heat transfer is thermal energy transfer
that is induced by a temperature
difference (or gradient)
Modes of Heat Transfer:
(i)Conduction Heat Transfer
- Occurs when a temperature gradient exists through
a solid or a stationary fluid (fluid/gas)
(ii)Convection Heat Transfer
- Occurs within a moving fluid or between a solid surface
and a moving fluid when they are at different temperatures
(iii)Thermal radiation
- Heat transfer between two surfaces (that are not in
contact)

Modes of Heat Transfer: Examples

Example: Design of a container


A closed container filled with hot coffee is in a room
whose air and walls are at a fixed temperature.
Identify all heat transfer processes that contribute to
cooling of the coffee. Comment on features that
would contribute to a superior container design.

CONDUCTION
Transfer of energy from the more energetic to less
energetic particles of a substance by collisions between
atoms and/or molecules.
Atomic and molecular activity random molecular
motion (diffusion)

T1

T1>T2

qx

T2

T2

Consider a brick wall, of thickness L=0.3 m which in a cold


winter day is exposed to a constant inside temperature,
T1=20C and a constant outside temperature, T2=-20C.
Under steadystate conditions
the temperature
varies linearly as a
function of x.
The rate of
conductive heat
transfer in the xdirection depends
on

q"x

T1 T2

T1=20C

qx

Wall Area, A

T2= -20C

L=0.3 m

The proportionality constant is a transport property,


known as thermal conductivity k (units W/m.K)

q"x

T1 T2
T
k
k
L
L

For the brick wall, k=0.72 W/m.K (assumed


constant), therefore
qx= 96 W/m2
How would this value change if instead of the brick
wall we had a piece of polyurethane insulating foam
of the same dimensions? (k=0.026 W/m.K)
qx is the heat flux (units W/m2 or (J/s)/m2), which is
the heat transfer rate in the x-direction per unit area
perpendicular to the direction of transfer.
The heat rate, qx (units W=J/s) through a plane wall
of area A is the product of the flux and the area: qx=
qx. A

In the general case the rate of heat transfer in the


x-direction is expressed in terms of the Fourier law:
T1(high)

q"x

qx

dT
k
dx

T2 (low)

x1

x2
x

Minus sign because heat flows from high to low T


- For a linear profile
dT (T2 T1 )

0
dx ( x2 x1 )

CONVECTION
Energy transfer by sum of molecular diffusion (as in
conduction) and macroscopic (advection) movement.
Convection: transport by random motion of
molecules and by bulk motion of fluid.
Advection: transport due solely to bulk fluid motion.

Types of convection:
Forced convection: Caused by external means such
as by fan, pump and atmospheric winds
Natural (free) convection: Flow induced by buoyancy
forces which arises from density differences caused by
temperature variations in the fluid
Boiling and condensation: Latent heat exchange is
associated with phase changes

Air at 20C blows over a hot plate, which is maintained


at a temperature Ts=300C and has dimensions 20x40
cm.

T 20 C

Air
q
TS 300 C

The convective heat flux is proportional to

q"x TS T

The proportionality constant is the convection heat


transfer coefficient, h (W/m2.K)

q"x h(TS T )
Newtons law of Cooling
For air h=25 W/m2.K, therefore the heat flux is qx=
7,000 W/m2
How would this value change if instead of blowing
air we had still air (h=5 W/m2.K) or flowing water
(h=50 W/m2.K)
The heat rate, is qx= qx. A = qx. (0.2 x 0.4) = 560 W.
The heat transfer coefficient depends on surface
geometry, nature of the fluid motion, as well as fluid
properties. For typical ranges of values, see Table 1.1
textbook.
In this solution we assumed that heat flux is positive
when heat is transferred from the surface to the fluid

Radiation
Thermal radiation is energy emitted by matter
Energy is transported by electromagnetic waves (or
photons).
Can occur from solid surfaces, liquids and gases.
Does not require presence of a medium

Emissive power E is
the radiation emitted
by the surface
Irradiation G is the rate
of incident radiation
per unit area of the
surface, originating
from its surroundings

Surroundings at Tsur

"
"
qincident
G qemitted
E

Surface at Ts

For an ideal radiator, or blackbody:

qemitted
Eb Ts4

Stefan-Boltzmann law

where Ts is the absolute temperature of the surface


(K) and is the Stefan-Boltzmann constant,
( = 5.67x10-8 W/m2.K4)
For a real surface:
"
qemitted

Ts4

is the emissivity

0 1

The irradiation G, originating from the surroundings is:


"
4
qincident
G Tsur

is the absorptivity
For a grey surface, =

0 a 1

The net radiation heat transfer from the


surface, per unit area is
"
4
qrad
(Ts4 Tsur
)

The net radiation heat exchange can be


also expressed in the form:
qrad hr A(Ts Tsur )
where

2
hr (Ts Tsur )(Ts2 Tsur
)

For a control surface:

qrad

qcond

E in E out 0
or

qconv
T
T
x

"
"
"
qcond
qconv
qrad
0

You might also like