ATAE Cluster Operation and

Maintenance

www.huawei.com

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Change Description

This slide is for OSMU training of ATAE Cluster V2R2C00. It is upda

ted based on the training slide of ATAE Cluster V2R1C01. The main
changes in the ATAE Cluster V2R2C00 are as follows:

Supporting the standby OSMU board for redundancy backup

Adjusting the portal for querying the OSS version number

Allowing users to add remarks for a network interface in the network inte
rface management function

Note: The OSMU of ATAE Cluster V200R002C00 supports M2000 V20

0R013 and U2000 V200R014. This slide is based on the M2000.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page2

References

OSMU user guide

OSMU online help

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page3

Objectives

After this training, you can:

Know the architecture and basic functions of the OSS self main
tenance unit (OSMU).

Know system management of the OSMU.

Know device management, service system management, softw

are management, and maintenance of the OSMU.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page4

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page5

OSMU Overview Why OSMU?

Troubles from ATAE cluster system:

Custom requirements

Installation of 2 ATAE
Subracks
Parameter Modification of
2 ATAE Subracks
Information Collection of
2 ATAE Subracks

..
..
..

Hardware and Software

Monitoring of 2 ATAE Subracks

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page6

Batch Installation
Batch Modification
Batch Maintenance

OSMU Overview Architecture

OSMU Hardware
The OSMU is in the first slot of the MPS subrack.
OSMU network
The OSMU communicates with service boards
by using the BASE Interface. The IP address on
OSMU
the BASE Interface cannot be changed.
The OSMU provides an IP address for
accessing the Internet.

OSMU Software Architecture

OSMU Agent
OSMU Server

Linux

OSMU Agent

The OSMU interacts with the OSMU

agent for processing service logics.
The OSMU agent is installed together
with the operating system (OS) and does
not need to be installed separately.

OSMU Agent
OSMU Board

Service Boards

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page7

OSMU Overview Function List

OSMU
http://x.x.x.x:30080/osmu

Hardware Monitor
One-Click Board
Activation

OSMU
Web
Accessing

GridLayout Data
Import & Export

Supporting IE6 or higher.

Completely Backup
& Restore
Completely
Information
Collection
OSS Software Fast
Installing

Supporting Firefox3.5 or
higher.
Firefox is recommended
because of faster.
Supporting concurrent
login of five users.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 8

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page9

OSMU Self Management Login

Type the IP address and port number of
the OSMU and log in.

If the OSMU have no network connect to

Internet, you should connect your PC to
the MPS subrack by using the network
cable and then use the 192.168.128.100
IP address for login.

Specify User Name, Password, Verify

Code on the login page.
Notes:

The OSMU support user admin only, the

default password of user admin is
Admin@123.

The timeout value of the verify code is 3

minutes.
When input http://10.71.186.11:30080/osmu, if
session is invalid, then the page will redirect
to: https://10.71.186.11:30088/osmu/login, for
login.
If you input https ports then all pages are
https.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page10

OSMU Self Management Logout

After login, you can click Logout
to return to the login page.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page11

OSMU Self Management Main Page &

OSMU Process
Navigate Area

Multi-tab, the limit is

10 tabs.

Modify the password of

user admin

View Operation Logs

Main Working Area

Query all operation logs.

Export operation logs.

Centralized
Task Area

Notes:
If the OSMU is running properly, you do not
need to take care of the OSMU process. You
need to run these commands only when the
OSMU is faulty.

OSMU Process Management: login to the OSMU board with PuTTY

Run rcosmu status to query the status of the OSMU process.
Run rcosmu stop to stop the OSMU process.
Run rcosmu start to start the OSMU process.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page12

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page13

Centralized Task Overview

Most of the operations in the OSMU are executed as tasks. All tasks are displayed in the
Centralized Task Management window. You can execute or delete tasks in the Centralized
Task Management window.
There are two types of tasks: Read Task (read only, have no effect on system running), Write
Task (have same affect of system running).

Click title to sort

Click Refresh to
manually load the
latest data from the
server.

When a task's Status is Waiting, you can

select this task and click Execute to execute it
immediately.
Notes: Manual execution of a task does not
obey the mutex rule in the OSMU. It will
cause this or another task execution to fail.

Select a task and click

Delete to delete the task.
The tasks whose Status
is Running cannot be
deleted.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page14

Centralized Task Column Detail

Waiting: Waiting for execution
Running: Executing
Succeed: Executed success

The end
execution
time of task.

Fail: Executed fail

Created by the OSMU,
the same as the operation
name in Operation Log.

Last and next execution time of

scheduled task.

The start
execution
time of task.

Execution Type:
One-Time: Execution only once.
Scheduled: Execution periodically.

Task
progress

The
creation
time of
task.

Detail message of task

execution result.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page15

Centralize Task The Task Mutex Rule

All tasks are scheduled by the centralize task module, it make all tasks obey the mutex rule for concurrent
executing tasks.
If you select one task and manually execute it, this task does not obey the mutex rule, and this task or
other tasks that are being executed may fail to be executed.

Microsoft Office
Excel 97-2003

Mutex Name

Mutex Value

Mutex Description

Board

An operation that only takes effect on one

board, for example, powering off one board.

Cluster

An operation that takes effect on one

cluster, for example, stopping the M2000 system
service.

OSS System

An operation that takes effect on one OSS

system, for example, changing the IP address of
the M2000 (including all M2000 boards and DB
boards that are used by the M2000).

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page16

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page17

Device Management Device Panel

You can monitor the software and hardware status of the entire ATAE cluster system on the device panel.

You can view the device

status by cabinet.
Area for displaying the
device status

Status
description

After you right-click the OSMU, a board, a switching board,

a service management module (SMM), a fan, or a subrack,
a shortcut menu is displayed.
After you right-click the OSMU, the displayed shortcut
menu includes only Details, Board health Events, and
Board sensor Info. After you right-click a service board,
the displayed shortcut menu includes Details, Board
health Events, Board sensor Info, Power On, Power
Off, Soft Reset, Hard Reset, and Switch.
After you right-click a fan, the displayed shortcut menu
includes Fan base Info, Fan health Events, and Fan
sensor Info. After you right-click a subrack, the displayed
shortcut menu includes Rack info, Rack health Events,
PEM health Events, and PEM sensor Info. After you
right-click an SMM, the displayed shortcut menu includes
SMM base Info, SMM health Events, and SMM sensor
Info.
Note: If Veritas Cluster Server (VCS) resources are not
configured on the service board, Switch in the shortcut
menu is disabled.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page18

Device Management Device Panel

Identifier

Status
Empty
Unknown

Unconfigured

Uninstalled

Power Off
Faulty

Meaning
The board is not present.
The OSMU monitoring module does not submit the status.
The status submitted by the OSMU monitoring module is unknown.
The OSMU does not have the configuration data of the board, but the
board is inserted in the subrack.
The OSMU does not have the configuration data of the board and the
board is not inserted in the subrack.
The board is powered off.
A hardware fault or software fault is detected, which indicates that the
service fails to run properly.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page19

Device Management Device Panel

Identifier

Status

Meaning

Unactivated The board data is configured and the board is powered on but not
activated. Therefore, service software cannot be loaded.
Activated The board is activated and service software can be loaded.
Normal

The service software runs properly.

SwitchOver The services on the active board are properly switched over to the
Service

standby board.
The software service does not run.

Stopped
Standby

The standby board runs properly and no service is running on the

Normal

board, so you can switch over the active and standby boards.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page20

Device Management Device Panel O

SMU active/standby switchover (new)
Data is automatically synchronized between the active and standby OSMU boards every hour.
This function can be executed only when the standby OSMU exists.
After the active and standby OSMU boards are switched, you must manually type the URL for the standby
OSMU board in the address bar of the web browser to log in to the OSMU.

After you right-click on the board and

choose Switch from the displayed
shortcut menu, the Information
dialog box is displayed.

After you click Yes, data synchronization between the active and standby
OSMU boards is automatically conducted once. If the synchronization fails, the
switchover cannot be performed between the active and standby OSMU
boards. The automatic switchover between the active and standby OSMU
boards starts only after the data synchronization succeeds.
After the switchover succeeds, the web page is in disconnected state. You
must manually type the URL for the standby OSMU board in the address bar of
theCo.,
web browser
to logrights
in to thereserved.
OSMU.
Copyright 2014 Huawei Technologies
Ltd. All
Page21

Device Management Batch Configuration

The Batch Configuration function allows you to import the data of the ATAE cluster
GrigLayoutTools into the OSMU to identify the system hardware configuration information, which
is initial information for further system installation.

Click Import to
select the ZIP file
of the
GridLayoutTools.
Click Export to
export the
GridLayoutTools
from the OSMU
system.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page22

Device Management Activate the Board

Activate the board build the entire distributed system for installing service software. The function
involves OS installation, installation volume management and cluster software (VxVM+VCS)
management, Oracle database installation, cluster system setup, database instance creation,
and table entry creation.

Select a task
before executing
it.

Activate the board task status:

Not enabled: The activation task is not
executed.
Succeeded: The task is activated successfully.
Failed: Activating the task failed.
Running: The activation task is running.

View: View the execution status of an activated task.

Continue: After the fault is rectified, continue to execute the
activation task from the failed point.
Activate: Start to execute the activation task from the
beginning. In the initialization, product addition, and product
expansion scenarios, click this button to activate boards.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page23

Device Management
Green: executed success
Red: executed fail

Activate the Board

Activate the board
status

Yellow: being executed

White: not executed

Progress for each

step

Boards which are

activating

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page24

Device Management Hardware Device (1)

On the Hardware Device interface, you can query the basic configuration information about the
rack, subrack, boards, and disk arrays in the ATAE cluster system.
Rack

Subrack

Board

Disk Array

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page25

Alarming When the DC PDB Malfunctions

Due to hardware
restrictions, the monitoring
function is applicable only to
the DC PDB and SMME.

Configure the lines to be

monitored.

Check the SMM model.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page26

Device Management Hardware Device

(2)

On the Hardware Device interface, you can query the basic configuration information about the
rack, subrack, boards, and disk arrays in the ATAE cluster system.
Network Interface

Route

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page27

Device Management - Hardware Device - Board

On the Board management interface, you can change the IP address of a single board or the IP addresses
of multiple boards in batch, and power on, power off, soft reset, hard reset, send magic key one or more
boards.

Application scenarios:
Change IP: After the boards are delivered to the office, the IP addresses of the boards must be set
again according to the IP address planning scheme of the office.
Power On and Power Off: If you need to replace a board, power it off first. Then replace the board with
a new one and power on the new board.
Soft Reset: When the service fails to be started or stopped, you can click Soft Reset to restart the
board OS.
Hard Reset: If soft resetting fails, you can click Hard Reset to restart the board.
Magic Key: If board is hung, you can send magic key to the board, it will dump all information which
located in the memory, and collect it and send back to headquarter to analysis.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page28

Device Management Hardware Device B

oard Change IP Address

1.
2.
3.

If you want to change IP addresses in different network segments,

you must select all boards and change their IP addresses at a time.
If no service system is installed, you need to change the IP
addresses related to the OS and VCS only. Otherwise, you need to
change the IP addresses of the service system.
If the service system is installed, stop the entire service system
(except the database) and then change the IP addresses. Otherwise,
the following dialog box is displayed.

Click OK to generate a
task for changing the IP
address.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page29

Device Management Hardware Board

Power on & Power Off
On the Board management interface, you can power on or power off a single or multiple boards. Before replacing a board,
power it off first. After the board is replaced with a new one, power on the new board.
Notes:
1. Before powering off a board, ensure that the service system on the board is stopped. Otherwise, data in the service
system may be lost or files in the service system may be damaged.
2. Power-on or power-off causes board unavailable within 10-20 minutes.
After you click Power On or Power
Off, a dialog box is displayed for
confirmation. After confirmation, you
can perform the relevant operation.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page30

Device Management Hardware Device

Board Hard (Soft) Reset
When you fail to stop or start the service system, you can use the Soft Reset or Hard Reset function to restart
the OS or board. Soft Reset enables you to restart the OS only. Hard Reset enables the SMM to reset the
board forcibly after the command of restarting the OS fails. Before Soft (Hard) reset board, it is recommended
to stop service and DB first.
After you click Soft Reset or Hard Reset,
a dialog box is displayed for confirmation.
After confirmation, you can perform the
relevant operation.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page31

Device Management Hardware Device

Board Details
On the Board Details interface, you can query the detailed configuration and current real-time
status of each board.
Board selection area. After you select a
board, the detailed information about the
board is displayed in the Board details
area.

Board details display area

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page32

Device Management Hardware Device

Network Interface Adding a Network Interface
You can select to add a network interface on the interface management page and select the
interface type (whether to bond) in the displayed dialog box. After you click Next, the interface
configuration page is displayed. You can select only products whose multi-network plane type
information has been registered in the system configuration. This is generally used in scenarios
where multiple planes are required for services, for example, M2000 southbound and northbound
isolation.
The usage of
network interfaces
is determined by
products.

Product boards
without multi-network
plane information
defined will not be
displayed.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page33

Device Management Hardware Device

Network Interface Changing the IP Address of a
Network Interface
On the Network Interface tab page, users can configure an IP address for a new network
interface or change the IP address of a network interface.

Step 3 Enter the new

IP address and
subnet mask, and
click OK.
Step 1 Select a
board whose IP
address needs to
be changed.

Step 2 Click
Change IP.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page34

Device Management Hardware Device

Route Adding a Route
On the Route tab page, users can add a route for a network interface.

Step 2 Select a
board and network
interface whose
route needs to be
added.

Step 1 Click
Add.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page35

Step 3 Enter route

information to be
configured and click
OK.

Device Management Hardware Device

Route Modifying a Route
On the Route tab page, users can modify a route for a network interface.

Step 1 Select a
board whose route
needs to be
modified.

Step 3 Enter modified

route information and
click OK.

Step 2 Click
Modify.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page36

Device Management Device Information

Device Asset Information

Click the hyperlink to download asset information,

which can be imported into the CAES system.

Notes: The hyperlink display the file which

located on the OSMU server, if the file id
deleted then the link is not able to download
file.
Device asset information to be collected
includes:
ATAE hardware asset information
SMM asset information
Board asset information
Fan asset information
Power board asset information
Disk array hardware asset information
Version information about the software
installed on boards

Collect: Start a collection task to collect asset

information. The collection task can be viewed in
the Centralized Task area.
Refresh: Refresh the information collection status.
Delete: Delete the collected file.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page37

Board Fault Information Can Be Viewed

by Choosing a Shortcut Menu Item

Right-click a board on
the device panel and
choose Board health
from the shortcut menu
to view the detailed fault
information.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page38

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page39

Service System Service Management

Board Services
On the Board Services interface, you can start, stop, and switch over the service system at the
board level.
Note: If VCS resources are not configured on the board, Switch in the shortcut menu is disabled.
Board selection area.

Select one board, and

view the resource status.

Status Message refresh every 30 seconds.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page40

Service System Service Management

Board Services

Start: Start the services on the selected board by starting the service
resources.
Constraints:
1. If you select multiple boards, multiple tasks of starting the system services
are generated and then executed one by one.
2. In the M2000 system, you must start the services on the active board and
then the services on the standby board. Otherwise, the services on the
standby board fail to be started.
3. The database service must be started before the service system is started.
Otherwise, the service system fails to be started.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page41

Service System Service Management

Board Services

Stop: Stop the services on the selected board.

Constraints:
1. Before stopping the database, stop the services on the associated
service board. Before you stop the database, the preceding dialog
box is displayed.
2. If you select multiple boards, multiple tasks of starting the system
services are generated and then executed one by one.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page42

Service System Service Management

Board Services

In a cluster system, the services on only one board

can be switched over to its standby board.

Switch: Switch over the services on the selected board. If an active board
is selected, the services on the active board are switched over to the
standby board. If a standby board is selected, the services on the
standby board are switched over to the active board.
Constraints:
1. In a cluster system, the services on only one board can be switched
over to its standby board. If the services on one board are already
switched over to its standby board, another switchover fails.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page43

Service System Service Management

System Services
On the System Services interface, you can start and stop the service system at the system
level.
Note: Stopping DB system service is not allowed (only stopping one DB board service is
allowed), because all service systems depend on it.

View resource status of a service

system
(M2000/PRS/Nastar/eSAU/eCoo/D
B).

Status message displayed in this box and refresh every

30 seconds.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page44

Service System Service Management Syst

em Services

The subrack No. and slot No. can

identify a unique board in the
service system.

Start: Start the services of the selected service system. The

script for starting the services is provided by the service
department.
Stop: Stop the services of the selected service system. The
script for stopping the services is provided by the service system.

The tasks of starting and stopping services can

be viewed in the Centralized Task area.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page45

Service System Query Version Number

On the Query Version Number, you can query version information of service system
one by one.

Select a product.

Then click View Version Number.

The result displays here.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page46

Service System U2000 OSS M

anagement Tool
After choosing OSS Management Tool in Navigation Tree, the login window of the U2000 OSMU matching the ATAE
cluster version is displayed.
For details about how to use the U2000 OSMU, see the OSMU help.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 47

Service System PRS Administration Tool

For details on how to use the PRS administration tool, see the document related to
the PRS.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page48

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page49

Software Management Software Sourc

e Management
On the Software Source Management interface, you can upload and delete software packages and query
the uploaded software packages. All packages are stored in the /opt/osmu_software_pkg directory on the
OSMU board. All packages are recorded on the OSMU.

If upload big package (> 100 MB), please use

the resumable transfer tool to transfer files.

A sample package

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page50

Software Management Software Sourc

e Management

Click Scan. The OSMU will scan packages

in the /opt/osmu_software_pkg directory
and display on the UI after completed.
Select a package and delete
it, it will delete the package
and the record in the OSMU.

The OSMU supports the function of uploading software

packages with software signatures. The package should
include a software_OSMUADP.xml file.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page51

Software Management Software Install

Service Software
On the Software Install you can install service software
(M2000/PRS/Nastar/eSAU/PSSAU/eCoordinator/antivirus software).

Select a package to install. This

display is from the Software
Source.

Install: Select a package and click Install, it will pop up a wizard for install.
Refresh: Refresh for the latest software package if any other person upload
a new package.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page52

Software Management Software Install

Service Software

Step 1: health check

Check the status of all the boards where the service system is
installed. The check items are as follows:
1.

OS version information (all boards involved in installation)

2.

Oracle version (database board)

3.

Oracle service status (database board)

4.

Oracle listening status (database board)

5.

Oracle character set (database board)

6.

Oracle connection status (database board)

7.

VCS status (all boards involved in installation)

8.

Check SwitchOver status of boards.

You can go to the next step after all the checks are performed.
Constraint:
The database must run on the active board. If the database runs on
the standby board, switch it over to the active board.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page53

Software Management Software Install

Service Software
Step 2: Set common parameters.
Configure the common parameters of the service
software and select the installation language and
installation path of the service software.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page54

Software Management Software Installati

on Service Software Installation

Step 3: Set user names and passwords.

1. Generally, user names do not need to be changed.
2. The default password of user ftpuser is
Changeme_123.
3. The default password of user root is huawei.
4. The default password of user system is
Changeme_123.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page55

Software Management Upgrade M2000

Upgrade
On the M2000 upgrade interface, you can upgrade the M2000 system remotely.
Step 1: Click Upload to select and upload the M2000
upgrade package.

Step 2: Select the uploaded

upgrade package and click Next.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 56

Click this icon to

delete the uploaded
upgrade package.

Software Management Upgrade M2000

The dialog box for uploading auxiliary tools is displayed. If no auxiliary tool is to be uploaded, click Next.

If no auxiliary tool is to be uploaded

during M2000 upgrade, click Next.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 57

Software Management Upgrade M2000

This dialog box allows you to set the upgrade procedure.
Use the default options, which need
not be changed unless specified.

Click Next to go to the

next page.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 58

Software Management Upgrade M2000

Upgrade details display area
Upgrade preparation
procedure display area

Upgrade progress display area

Click Start to make

upgrade preparations.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 59

Software Management Upgrade M2000

Use the default options,

which need not be changed
unless specified.

After the upgrade preparation

procedure is complete, click
Back to return to the dialog box
of selecting the upgrade
procedure.
Click Next to go to the
next page.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 60

Software Management Upgrade M2000

Upgrade procedure display area

Upgrade details display area

Upgrade progress
display area

Click Start to start the

upgrade.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 61

Software Management Upgrade M2000

After the upgrade is

successful, click Next to go to
the completion dialog box.
Click Finish. Then the
upgrade is complete.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 62

Software Management Software Installation

M2000 Expansion
After the platform is expanded, you need to expand M2000 services.

Click Expand. An expansion task is

generated in the Centralized Task
Management window.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page63

Software Management Software Licen

se Management
On the Software License Management interface, you can add, modify, and delete the license
of the storage foundation high-availability (SFHA) software and enable the license in all cluster
systems.

Name the license to identify it.

Enable: The newly added license is not

delivered to each board but is stored on the
OSMU. You need to click Enable to make the
license take effect.
Delete: Deletion of the license from the
OSMU does not affect the license on the
board. An enabled license cannot be deleted.

Enter the license of the SFHA

software.

Caution: A temporary license is provided for delivery. This function is used on site to
change the temporary license into an official license for commercial use. Otherwise,
after the temporary license expires, the SFHA software fails to be started.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page64

Contents
1.
2.
3.
4.

OSMU Overview
OSMU Self Management
Centralized Task
OSMU Function List
4.1 Device Management
4.2 Service System Management
4.3 Software Management
4.4 Maintenance

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page65

Maintenance Backup and Restore

The OSMU provides backup of: OS, OSS static data, DB static data, and OSMU
data, and restore of: OS, OSS static data, OSS dynamic data, and OSMU data.

1. Create an OS backup task by using the wizard.

2. Create a task of backing up static data by using the wizard.
3. Supported OSS: OSS of the M2000/PRS/Nastar/eSAU/eCoo,
OSMU, and Oracle database

1. Create an OS restoration task by using the wizard.

2. Create a task of restoring static data by using the wizard.
3. Create a task of restoring dynamic data by using the wizard.
4. Supported OSS: OSS of the M2000/PRS/Nastar/eSAU/eCoo,
and Oracle database

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page66

Maintenance Backup OSMU Application Data

Back up the OSMU system. Each task
backs up data of a service system.

Backup contents:
OSMU application data.
OSMU database data.
OSMU operation log dump.
OSMU task dump.

Click Finish to start

backup.

All software packages in the software

source will be backed up when backup
disk arrays exist.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page67

Maintenance - Backup - OSS Application Data

Select the system whose static data you want to back up
(only deployed systems are displayed). For example:
M2000: Back up data in /opt/oss.
PRS: Back up data in /opt/PRS.

Back up OSS application data. Each

task backs up data of a service
system.

Click Finish to start

backup.

Click Next to choose the

OSS system.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page68

Maintenance - Backup - DB Application Data

DB application data:
All contents in
/exoprt/home/oracle of
the DB board

Select one or more boards

whose data you want to
back up.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page69

Maintenance Backup OS

Select one or more boards

whose data you want to
back up.

Back up OS data:
All contents in the root
directory

Tips: The board whose OS data is being

backed up does not need to be restarted
(new feature in V2R1C01). This ensures
that services are available on this board.
However, the OS of the board will be
restarted during data restoration.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page70

Maintenance - Restore - OSS Dynamic Data

Warning: During dynamic data
restoration, the M2000 or PRS service
should be stopped first.

Support the function of restoring

dynamic data of:
M2000/PRS/Nastar/eSAU/eCoo

1. Dynamic data is configured and backed up on the

M2000/PRS/Nastar/eSAU/eCoo interface. After backup, the
OSMU backs up dynamic data to the backup disk array.

Select an OSS system

(M2000/PRS/Nastar/eSAU/eCoo) and
backup time to restore it.

2. The OSMU copies the selected backup data from the

backup disk array to the M2000/PRS/Nastar/eSAU/eCoo
and then invokes the M2000/PRS/Nastar/eSAU/eCoo
restoration program to restore the data.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page71

Maintenance - Restore - OSS Application Data

Warning: During dynamic data
restoration, the
M2000/PRS/Nastar/eSAU/eCoo service
should be stopped first.

Restore OSS application

data.

Select an OSS system

(M2000/PRS/Nastar/eSAU/eCoo) and
backup time to restore it.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page72

Maintenance Restore Restore OS

Warning: During data restoration, the
OS of the selected board is restarted.
All the services on the board are
unavailable.

Restore OS data.

Select board and the backup time to restore it.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page73

Maintenance - Time Management - Time Zone

On the Time Management interface, you can change the time and time zone and set the upper-level time
server of the OSMU.
Notes: Change time and time zone take affect for the entire distribute system.

Modify: Click Modify, it pop up the dialog to modify.

Refresh: Click Refresh to display the latest time and time zone.

Display the daylight saving time information if

this time zone having the daylight saving
time.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page74

Maintenance - Time Management - Modify Time

and Time Zone
On the page, you can set the time, time zone, and upper-level
NTP server of this distributed system.
Notes: Modify and time date and time
zone should stop the services of OSS
system.

Select time zone in combo

box and set time data in
time date input box.
Click OK to complete the
modification.
Notes:
1. Changing the data time will cause the
OSMU to restart. You should re-login
after 1 to 2 minutes.
2. When restarting the OSMU, all tasks that

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page75
are being executed will fail.

Maintenance Time Management Upper-le

vel NTP Server Info
Notes:
1. The time difference between an NTP client and the NTP server should be lower than 1000 seconds; otherwise, the NTP
client will be abnormal.
2. A maximum of 10 NTP servers can be set on the OSMU. However, only one preferred NTP server can be set.

Specify the IP address and set the prefer option.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page76

Routine Maintenance Password Management

Change OS/DB User Password
On the Password Management tab page, users can change OS and DB user passwords. Note: The
database users must have the same password.
Warning: Ensure that the service system is stopped before these operations; otherwise,
the service system is affected.

If you select M2000 System in Cluster

System, passwords only of all M2000 board
OS users are changed. It is similar with
other systems.

After related passwords are entered,

click Modify.

If you select M2000 Database System,

only M2000 database user passwords
will be changed.

If the Sybase database is used, M2000 V200R013

allows changing passwords of users sa and sybuser
separately. If the Oracle database is used, M2000
V200R013 allows the administrator user and
common users to set passwords separately and their
passwords
can
only be changed once.
Copyright 2014 Huawei Technologies Co., Ltd. All rights
reserved.
Page77

Maintenance - Service Interface Board Replace

After replacing the RTM of a board, you need to select the replaced board and click Replace on the Service
Interface Board Replace interface. Then the OSMU updates the information about the newly inserted RTM.
This operation is not required when you replace a front board.
Notes: Replace OSMU interface board is not support here, there is another document for this.

After replacing the RTM of a board,

select the replaced board and click
Replace to update the information
about the RTM.

Warning: This operation causes OS restart

and the service system becomes
unavailable. Therefore, use this function
only when you replace the RTM of a board.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page78

Maintenance KVM
On the KVM interface, you can connect to a board and operate the OS of the board. If no OS is
installed on the board, you can log in to the remote monitoring interface directly. If an OS is
installed on the board, the login dialog box is displayed.
KVM function area

KVM operation display

area

Constraints:
1. A maximum of four KVM connection windows can be
opened at a time.
2. Only one KVM connection is allowed for each board.

All the operations that are performed in command line mode on

the board can be performed by using the KVM in the KVM
operation display area.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page79

Maintenance KVM
KVM operation area description

Icon

Description
Disconnect from a board.
Synchronize the operations of the local mouse and remote
mouse.
Send the special combination key.
Set color bits.
Display in full screen.
Display in split screen.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 80

Maintenance KVM
KVM operation area description

Icon

Description
Refresh the screen.
Select the service board that you want to connect remotely. The gray
icon indicates the selected board.
Display the keyboard indicator status of the controlled board.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page 81

Maintenance Collect and Check System Info

On the Collect and Check System Info interface, you can collect the information
about all boards, disk arrays, and service systems to determine the health status of
each board and disk array.

After Collect succeed, click the link

to download the file.
There are two types of files:
Collect: File format is
"OSMUIPAddress_env_info_YearM
onthDayHourMinuteSecond.zip".
Kdump: File format is
"os_dump_original_YearMonthDay
HourMinuteSecond.bz2" and
"os_dump_analysis_YearMonthDay
HourMinuteSecond.bz2".

Collect: Start a new collection task,

which can be viewed in Centralized
Task.
Refresh: Refresh the collection
status on the current interface.
Delete: Delete the collected
information and the related collection
task.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page82

Routine Maintenance Collect and Check

System Info Health Check

After system information is collected and checked, click

Next to create a health check task to check all devices,
including subracks, boards, and disk arrays, in the
system.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page83

Routine Maintenance Collect and Check S

ystem Info Location Information

Select the
location
information to
be collected.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page84

Maintenance Collect and Check System I

nfo - Kdump

Select one or more boards and click Finish to

collect Kdump info.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page85

Maintenance Collect ESN Information

On the Collect ESN Information interface, you can collect the MAC addresses of all the network interface
cards (NICs) of the active and standby boards in the M2000/PRS/Nastar/SAU service system. The collected
MAC addresses are used to apply for a license for the service system.

After data collection, click the

hyperlink to download the collected
data.

Collect: Click Collect to generate a collection

task, whose status can be viewed in
Centralized Task.
Refresh: Refresh the information in the data
collection area.
Delete: Delete the collected information and
centralized task.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page86

Maintenance - Setting Alarm and Heart Port

HeartHands: The OSMU provides a standard handshake interface. The M2000 can detect whether the OSMU works properly by
using the handshake interface. If the handshake is abnormal, the upper-level management system generates an alarm, reporting
the OSMU exception.
NorthToAlarm: The OSMU monitors the other hardware devices in the ATAE Cluster system, for example, OGPU boards, disk
array and so on. If the NorthTOAlarm function is enabled, the OSMU will send these alarms to the M2000.
Type the IP
address of the
upper-level
management
system.
Warning: UniEP V2R1C01(M2000R13.1)
and later support alarm retransmission.
Because the inform protocol is not
compatible with the original trap protocol,
Enable Alarm Retransmission can be
set to Yes only when the M2000 supports
alarm retransmission; otherwise, the
M2000 cannot receive alarms.

Specify the interface type.

After the interface type is specified, the
corresponding port number is displayed in
Port. If Type is set to HeartHands, 23001 is
displayed in Port. If Type is set to
NorthTOAlarm, 31077 is displayed in Port.

New: Create a northbound alarm interface or a heartbeat handshake.

Delete: Delete a northbound alarm interface or a heartbeat
handshake.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Maintenance OSMU Maintenance Vie

w Operation Logs
On the View Operation Logs interface, you can query the operation logs related to all the operations in the current system, including the operation
name, operation result, user who performs the operation, IP address of the user who logs in to the OSMU, and time when the user performs the
operation.
When the number of operation logs exceeds 2000, the OSMU will dump it to file and located it under /opt/osmu/reports/log_dump/ directory, file format
is: log_dump_YYYYMMDDHHmmss.zip.

Refresh: Refresh to the latest operation log.

Export: Export the operation log to a CSV
file.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page88

Maintenance OSMU Maintenance Cha

nge OSMU IP
On the Change OSMU IP interface, you can change the IP address used to log in to
the OSMU.
Enter the new IP address and
subnet mask.
If the new IP address is not
in the same network
segment with the current IP
address of the OSMU,
change the IP address at
the near side. After that, add
the route at the near side.

You can add or modify the

OSMU route. Ensure that the
route is reachable before
changing IP addresses.

After changed the IP address,

the connection to the OSMU
is terminated. You need to use
the new IP address to log in to
the OSMU again.

Site name configured on the OSMU will be

displayed in the additional information about
the reported OSMU alarm and is used to
identify this OSMU.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page89

Adding OSMU Users with Limited Permissions

This area displays the user

name and user group of the
currently logged-in user.

Three types of user groups

The value of Created By is different for the operation logs

recorded for different users.
Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.
Page90

Routine Maintenance OSMU Maintenanc

e Virus Information
You can choose Routine Maintenance > Maintain OSMU > Virus Information
to display the virus information about each board.

Display the virus information about boards.

Warning: You must install the antivirus
software and set a scheduled scanning
task on the server.

The virus information is updated,

and a task is generated in the
Centralized Task Management
window.

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.

Page91

Copyright 2014 Huawei Technologies Co., Ltd. All rights reserved.