Scribd
Upload
5K views

Networking Devices, Media and Connector

Network devices such as hubs, switches, and routers are used to efficiently transmit data between networked devices. Common networking cables include twisted-pair copper cables, coaxial cables, and fiber-optic cables. Twisted-pair cables like Category 5 are widely used for Ethernet networks and come in both unshielded and shielded versions. Coaxial cables like RG-59 and RG-6 are used for cable television and local area networks. Fiber-optic cables can transmit data over much longer distances and come in multimode and single-mode versions.

Uploaded by

miamor07
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
5K views

Networking Devices, Media and Connector

Network devices such as hubs, switches, and routers are used to efficiently transmit data between networked devices. Common networking cables include twisted-pair copper cables, coaxial cables, and fiber-optic cables. Twisted-pair cables like Category 5 are widely used for Ethernet networks and come in both unshielded and shielded versions. Coaxial cables like RG-59 and RG-6 are used for cable television and local area networks. Fiber-optic cables can transmit data over much longer distances and come in multimode and single-mode versions.

Uploaded by

miamor07
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 29

Networking Devices,

Media and Connector

To make data transmission


more extensible and efficient
than a simple peer-to-peer
network, network designers
use specialized network devices
such as hubs, switches, routers,
and wireless access points to
send data between devices.

Common Network Cables

Until recently, cables were the


only medium used to connect
devices on networks. A wide
variety of networking cables are
available. Coaxial and twistedpair cables use copper to
transmit data. Fiber-optic
cables use glass or plastic to
transmit data.

Twisted pair
is a type of copper cabling that is
used for telephone
communications and most
Ethernet networks.

The two basic types of


twisted-pair cables
Unshielded Twisted Pair
(UTP)

Shielded Twisted Pair


(STP)

Unshielded Twisted Pair (UTP)


is the cable that has two or four
pairs of wires. This type of cable relies
solely on the cancellation effect
produced by the twisted-wire pairs
that limits signal degradation caused
by electromagnetic interface (EMI)
and radio frequency interference
(RFI).

Shielded Twisted Pair (STP)


each pair of wire is wrapped in
metallic foil to better shield the wires
from noise. Four pairs of wires are
then wrapped in an overall metallic
braid or foil. STP reduces electrical
noise from within the cable.

Category Rating
UTP comes in several categories
that are based on two factors:
The number of wires in the
cable
The number of twists in those
wires

1. Category 3 is the wiring used for


telephone systems and Ethernet
LAN at 10 Mega byte per second
(Mbps).
2. Category 3 has four pairs of
wires.

3. Category 5 and Category 5e


have four pairs of wires with a
transmission rate of 100 Mbps.
4. Category 5 and Category 5e
is the most common network
cables used.
5. Category 5e has more twists
per foot than Category 5 wiring.

Some Category 6 cables use a plastic


divider to separate the pairs of wires,
which prevents interference.

Coaxial Cable

Coaxial cable
is a copper-cored cable
surrounded by a heavy
shielding. Coaxial cable is used
to connect the computers to the
rest of the network.

Several types of coaxial cable


exist:
Thicknet (10BASE5) is a coaxial
cable used in networks operating
at 10 Mbps, with a maximum
length of 500 meters.
Thinnet (10BASE2) is a coaxial
cable used in networks operating
at 10 Mbps, with a maximum
length of 185 meters.

RG-59 is most commonly


used for cable television in
the U.S.
RG-6 is higher-quality cable
than RG-59, with more
bandwidth and less
susceptibility to interference.

Fiber-Optic Cable
is a glass or plastic conductor
that transmits information
using light. Fiber optic cable
has one or more optical fibers
enclosed in a sheath or jacket.

These are the two types of glass


fiber-optic cable:
Multimode
Single-mode

Multimode
is the cable that has a thicker
core than single-mode cable. It is
easier to make, can use simpler
light sources such as Light
Emitting Diodes (LEDs), and
works well over distances of a few
kilometers or less.

Single-mode
is the cable that has a very
thin core. It is harder to make,
uses lasers as a light source,
and can transmit signals
dozens of kilometers with ease.

You might also like