Scribd
Upload
45 views

Powerpoint

The document provides step-by-step instructions for completing a simple oil change. It explains that the engine should be warmed up for 5 minutes before draining the oil (Step 1). The car must then be safely jacked up and placed on jack stands (Step 2). The drain plug is removed to drain the old oil, which is disposed of safely (Steps 3-5). The old oil filter is then removed and replaced with a new one, ensuring the rubber gasket is wet with new oil (Steps 6-7). Finally, the drain plug is replaced, the engine is refilled with new oil to the proper level, and the dipstick is checked to complete the change (Steps 8-9 and the

Uploaded by

api-344515183
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
45 views

Powerpoint

The document provides step-by-step instructions for completing a simple oil change. It explains that the engine should be warmed up for 5 minutes before draining the oil (Step 1). The car must then be safely jacked up and placed on jack stands (Step 2). The drain plug is removed to drain the old oil, which is disposed of safely (Steps 3-5). The old oil filter is then removed and replaced with a new one, ensuring the rubber gasket is wet with new oil (Steps 6-7). Finally, the drain plug is replaced, the engine is refilled with new oil to the proper level, and the dipstick is checked to complete the change (Steps 8-9 and the

Uploaded by

api-344515183
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 8

JASON FERGUSON

WITH JTECH

HOW TO DO A SIMPLE OIL CHANGE


IN THIS PRESENTATION I WILL EXPLAIN THE
PROCEDURESYOU MUST FOLLOW TO
SUCCESSFULLY COMPLETE A PROPER OIL CHAN

STEP ONE:
If the engine is cold,crank it and
Let it run for about 5 minutes
To let the oil warm up.

STEP TWO:
Safely jack the car up
and place on jack stands.

Never work undera vechile that is


not
Properly placed on jackstands!

STEPS 3, 4
AND 5
Remove the
Properly drain the Dispose of the
drain plug to the engine oil in a safe oil safely and
oil pan.
container.
properly.

STEPS 6 &7

REMOVE THE OLD USED OIL


FILTER AND REPLACE
WITHNEW OIL FILTER.

REPLACE WITH NEW OIL


FILTER. WET THE RUBBER
GASKET WITH SOME OF
THE NEW OIL. NEVER
TIGHTEN WITH A
WRENCH, ONLY HAND
TIGHTEN.

STEPS 8 &9

INSTALL

NEW DRAIN
PLUG INTO THE DRAIN
HOLE ON THE OIL PAN.
REMOVE FILL CAP AND
FILL MOTOR UP TO THE
RECOMMENDED LEVEL
SPECIFIED ON YOUR
VEHICLES DIP STICK.

FINAL STEP CHECK THE OIL LEVEL


WITH THE DIPSTICK.
CLEAN UP YOUR WORK
STATION AND THE
VEHICLE YOU ARE
WORKING ON.

You might also like