Prepared By: Sagar Mona J. ROLL NO:-442
Uploaded by
Sunil PillaiPrepared By: Sagar Mona J. ROLL NO:-442
Uploaded by
Sunil Pillai: PREPARED BY:
SAGAR MONA J.
ROLL NO:-442
Introduction To Access
Techniques
• 1st wireless network has established in 1970
with the primary aim of providing voice
telephony services to mobile subscriber.
• In late 1980 and early 1990 M/S Qualcomm
Inc. proposed a Code Division Multiple Access,
which is a second wireless network. The major
second generation technologies are GSM &
CDMA. GSM works on TDMA & CDMA works on
CDMA access technologies
WHY CDMA
• FREQUENCY DIVISION MULTIPLE ACCESS:
• TIME DIVISION MULTIPLE ACCESS:
• CODE DIVISION MULTIPLE ACCESS:
THEORY IN WHICH CDMA
BASED:
• Spread Spectrum Principle
• Spread Spectrum Communications is distinguished by three
key Elements:
• The signal occupies a bandwidth much greater than that
which is necessary to send the the information. This
results in many benefits, such as immunity to interference
and jamming and multi-users access, which we’ll discuss
later.
• The bandwidth is spread by means of a code which is
independent of data. The independence of the coad
distinguishes this from standard modulation schemes in
which the data modulation will always spread the data
modulation will always spread the spectrum somewhat.
• The receiver synchronizes to the coad to recover the
data. The use of an independent coad and synchronous
reception allows multiple users to access the same
frequency band at the same time.
Types of Spread Spectrum
Communications
• Frequency hopping
• Time hopping
• Direct sequence
Signal transmission consists of
the following steps:
• A pseudo-random code is generated, different
for each channel and each successive
connection.
• The Information data modulates the pseudo-
random code (the Information data is “spread”).
• The resulting signal modulates a carrier.
• The modulated carrier is amplified and
broadcast.
Signal reception consists of the
following steps:
• The carrier is received and amplified.
• 2. The received signal is mixed with a local
carrier to recover the spread digital signal.
• 3. A pseudo-random code is generated,
matching the anticipated signal.
• 4. The receiver acquires the received code and
phase locks its own code to it.
• 5. The received signal is correlated with the
generated code, extracting the Information data.
IMPLIMENTING CDMA
TECHNOLOGY:
• Input data
Spreading codes:
• Orthogonal codes i.e. Walsh Codes
• Pseudo-random Noise (PN) Codes
• Generating Pseudo-Random Codes
• . It must be deterministic. The subscriber station must
be able to independently generate the code that matches
the base station code.
• 2. It must appear random to a listener without prior
knowledge of the code (i.e. it has the statistical
properties of sampled white noise).
• 3. The cross-correlation between any two codes must be
small (see below for more information on code
correlation).
• 4. The code must have a long period (i.e. a long time
before the code repeats itself).
Cross-Correlation:
Auto-Correlation:
Near/Far Problem
• The autocorrelation of the PN code with
the desired coded signal
• The sum of the cross-correlation of the PN
code with all the other coded signals
System Operation
Pilot Codes
GLOBAL PILOT:
SHORT ACCESS PILOT:
LONG ACCESS PILOT:
ASSIGNED PILOT:
HOW CDMA WORK?
• POWER CONTROL
• Handover:
•
FDMA vs. TDMA vs. CDMA:
• Frequency Division Multiple Access
Time Division Multiple Access
Code Division Multiple Access
ADVANTEGES OF CDMA:
• Reduce Service Interruptions.
• Low Maintance & Operational cost.
• Better System Coverge Flexibility.
• Easy Transition To Mobile Services
SALIENT FEATURES OF
CDMA:
• It is an advanced communication
technology
• It has Anti-jam & security features.
• Large capacity as compared to other
technologies like FDMA and TDMA.
• It uses spread spectrum technology.
CONCLUSION:
• CDMA give us the benefits of no
frequency planning , high capacity ,
flexibility along with high performance
quality at a minimum
