Foundation Presentation
Foundation Presentation
MUHAMMAD ABUBAKR
WAQAR JALIL
SYED HANNAN
SADAM BHITTE
MUHAMMAD TAHIR
MUHMMAD KAMIL
MAHAM ASHRAF
MUSTAFA FAIZ
Sumbal
Fizan
Muzamil
DEEP FOUNDATIONS
If the depth of a foundation is greater than its
width, the foundation is known as deep
foundation
A deep foundation is used to transfer the load of
a structure down through the upper weak layer
of topsoil to the stronger layer of subsoil below
When the soil of good bearing capacity is
not available near the ground.
The space is restricted to allow for spread
footings
The subsoil water level is high
The load of structure is heavy
Pile foundations
Well foundations
Caisson foundations
It can defined as a series of columns
constructed or inserted into the ground to
transmit the loads of a structure to a lower level
of subsoil.
Live load
Dead load
Wind load
Seismic load
water load
LOAD BEARING PILES
It bear the load come from the structure
Generally driven vertical or near vertical position
Bearing piles are divided into tow parts
1. Bearing piles
2. Friction piles
Timber piles
Steel piles
Concrete piles
TIMBER PILES
Advantages
Easy handling, noun corrosive matrial,.if permanently submerged then fairly
resistance to decay, relatively inexpensive, usually limited to short length.
low capacity
Disadvantages
may require treatment to prevent decay, insects and borers from damaging pile.
easily damaged during hard driving and inconvenient to splice, low capacity.
STEEL PILES
Advantages
High axial working capacity, wide variety of sizes, easy on side modification,
fairly easy drive, good penetration through hard materials(with shoe).
Disadvantages
high coast, difficulty in delivery, relatively higher corrosion, noisy driving.
CONCRETE PILES
Advantages
High capacity, inexpensive, durable, corrosion resistance.
Disadvantages
Tough handling, splicing and transport difficulties.
PILE SPACING
The center to center distance between successive piles is called
pile spacing.
It has to carefully designed by considering the following factors.
1. Type of pile
2. Material
3. Length
4. Grouping
5. Load coming on piles
1.Dead load
2.Live load
3.Wind load
4.Horizontal force due to water current
5.Longitudinal forces
6.Seismic forces.
Dead loads:
it includes weight of superstructure .
Live loads:
Load caused due to tractive effect of vehicles on bridges and road,
load due to human beings, furniture floors &other materials.
Wind loads:
the wind loads shall be seen only on the exposed area in elevation and
hence acts laterally on the bridge
Earth pressure:
Seismic forces:
Cutting Edge
Well Curb
Bottom Plug
Staining
Top Plug
Well Cap
THANK YOU