IT-101

Section 001

Introduction to Information
Technology
Lecture #15
Overview
 Communication systems
 Analog Modulation
 AM
 FM
 Digital Modulation
 ASK
 FSK
 Modems
Communication systems

Digital

Analog

 The block diagram on the top shows the blocks common to all
communication systems
Remember the components of a communications
system:
 Input transducer: The device that converts a physical signal
from source to an electrical, mechanical or electromagnetic
signal more suitable for communicating
 Transmitter: The device that sends the transduced signal
 Transmission channel: The physical medium on which the
signal is carried
 Receiver: The device that recovers the transmitted signal from
the channel
 Output transducer: The device that converts the received signal
back into a useful quantity
 Analog Modulation
 The purpose of a communication system is to transmit information signals
(baseband signals) through a communication channel
 The term baseband is used to designate the band of frequencies
representing the original signal as delivered by the input transducer
 For example, the voice signal from a microphone is a baseband signal,
and contains frequencies in the range of 0-3000 Hz
 The “hello” wave is a baseband signal:
 Since this baseband signal must be transmitted through a communication channel
such as air using electromagnetic waves, an appropriate procedure is needed to
shift the range of baseband frequencies to other frequency ranges suitable for
transmission, and a corresponding shift back to the original frequency range after
reception. This is called the process of modulation and demodulation
 Remember the radio spectrum:

 For example, an AM radio system transmits electromagnetic waves with

AM radio FM radio/TV
frequencies of around a few hundred kHz (MF band)
 The FM radio system must operate with frequencies in the range of 88-108 MHz
(VHF band)
 Since the baseband signal contains frequencies in the audio frequency range (3
kHz), some form of frequency-band shifting must be employed for the radio
system to operate satisfactorily
 This process is accomplished by a device called a modulator
 The transmitter block in any communications system contains the modulator
device
 The receiver block in any communications system contains the demodulator
device
 The modulator modulates a carrier wave (the electromagnetic wave) which has
a frequency that is selected from an appropriate band in the radio spectrum
 For example, the frequency of a carrier wave for FM can be chosen from the
VHF band of the radio spectrum
 For AM, the frequency of the carrier wave may be chosen to be around a
few hundred kHz (from the MF band of the radio spectrum)
 The demodulator extracts the original baseband signal from the received
modulated signal
To Summarize:
 Modulation is the process of impressing a low-frequency information signal
(baseband signal )onto a higher frequency carrier signal
 Modulation is done to bring information signals up to the Radio Frequency (or
higher) signal
Basic analog communications system
Baseband signal
EM waves (modulated
(electrical signal) Transmitter signal)

Input Transmission
transducer Modulator
Channel

EM waves (modulated
Carrier signal)
Baseband signal
(electrical signal) Receiver

Output
Demodulator
transducer
 Types of Analog Modulation
 Amplitude Modulation (AM)
 Amplitude modulation is the process of varying the amplitude

of a carrier wave in proportion to the amplitude of a

baseband signal. The frequency of the carrier remains constant
 Frequency Modulation (FM)
 Frequency modulation is the process of varying the frequency

of a carrier wave in proportion to the amplitude of a

baseband signal. The amplitude of the carrier remains constant
 Phase Modulation (PM)
 Another form of analog modulation technique which we will not

discuss
Amplitude Modulation

Carrier wave

Baseband signal

Modulated wave

Amplitude varying-
frequency constant
Frequency Modulation

Carrier wave

Small amplitude: Large amplitude:

Baseband signal high frequency
low frequency

Modulated wave
Frequency varying-
amplitude constant
AM vs. FM
 AM requires a simple circuit, and is very easy to generate.
 It is simple to tune, and is used in almost all short wave broadcasting.
 The area of coverage of AM is greater than FM (longer wavelengths
(lower frequencies) are utilized-remember property of HF waves?)
 However, it is quite inefficient, and is susceptible to static and other
forms of electrical noise.

 The main advantage of FM is its audio quality and immunity to noise.

Most forms of static and electrical noise are naturally AM, and an FM
receiver will not respond to AM signals.
 The audio quality of a FM signal increases as the frequency deviation
increases (deviation from the center frequency), which is why FM
broadcast stations use such large deviation.
 The main disadvantage of FM is the larger bandwidth it requires
Digital Modulation
 The previous section presented analog communication systems
that transmit information in analog form using Amplitude or
Frequency modulation
 Digital communication systems also employ modulation
techniques, some of which include:
 Amplitude Shift Keying
 Frequency Shift Keying
 Phase Shift Keying
 Basic digital communications
system Transmitter EM waves (modulated
Digital signal
signal)
Analog signal

correction
converter
Transmission

coding
Input Modulator

Error
transducer A/D Channel

Carrier EM waves
Receiver (modulated signal)
analog signal digital signal

correction
detection/
converter

Output Error Demodulator

transducer
D/A
 Some Types of Digital Modulation
 Amplitude Shift Keying (ASK)
 The most basic (binary) form of ASK involves the process of switching
the carrier either on or off, in correspondence to a sequence of digital
pulses that constitute the information signal. One binary digit is
represented by the presence of a carrier, the other binary digit is
represented by the absence of a carrier. Frequency remains fixed
 Frequency Shift Keying (FSK)
 The most basic (binary) form of FSK involves the process of varying
the frequency of a carrier wave by choosing one of two frequencies
(binary FSK) in correspondence to a sequence of digital pulses that
constitute the information signal. Two binary digits are represented by
two frequencies around the carrier frequency. Amplitude remains fixed
 Phase Shift Keying (PSK)
 Another form of digital modulation technique which we will not discuss
 Amplitude Shift Keying
Digital 1 0 1 1 0 0 1 0 1 0
information

Carrier wave

ASK
modulated
signal

Amplitude varying-
frequency constant
Carrier present Carrier absent
 Frequency Shift Keying
1 0 1 1 0 0 1
Digital
information

Carrier 1
(frequency #1)
Carrier 2
(frequency #2)
FSK
modulated
signal

Frequency varying-
amplitude constant
Modems
 Modems are devices used to enable the transfer of data over the public switched
telephone network (PSTN)
 The name modem comes from the name MOulator- DEModulator which
describes the function the modem performs to transfer digital information over
an analog network
 The goal is to produce a signal that can be transmitted easily and decoded to
reproduce the original digital data. Primarily used to communicate via telephone
lines, modems can be used over any means of transmitting analog signals
 There are many kinds of modems available today:
 Internal modem:
 A modem card in your computer that is integrated within the system
 Less expensive than external modems
 Disadvantage is that you need to access inside the computer to replace the
modem
 External modem
 A device that connects externally to your computer through a serial port
 External power supply does not drain power from the computer
 Modem activity can easily be observed
 More expensive than an internal modem
Source: http://Wikipedia.com
 DSL (Digital Subscriber Line)
 A high-speed data service that works over conventional telephone lines
and is typically offered by telephone companies
 It does not occupy the phone line-you can still talk on the phone
 Speed is much higher than regular modem

 Cable modem
 A device that connects to the existing cable feed and to an Ethernet
network card in the PC (also called a NIC for Network Interface Card)
 Is different than a common dial up modem
 Supports higher speeds
 Typically offered by cable companies

 Modems are the most popular means of Internet access, UCLA

2001 study of American Internet users shows that 81.3% of them
use telephone modem, and 11.5% cable modem