Scribd
Upload
89 views10 pages

Project On Multistoreyed Car AND Bike Parking System: Submitted To:-Prof. J.R.Bhavsar Submitted By: - DE Group 4AG-2

The document discusses a proposed multi-storey parking system for cars and bikes. It would allow compact parking of more vehicles in less space by stacking them across multiple levels. The levels could be above or below ground, accessed by ramps or lifts. The system aims to address lack of parking space in dense urban areas. It is expected to provide parking at lower cost per space than conventional parking lots while using less total area of land.

Uploaded by

Pratik Chaudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
89 views10 pages

Project On Multistoreyed Car AND Bike Parking System: Submitted To:-Prof. J.R.Bhavsar Submitted By: - DE Group 4AG-2

The document discusses a proposed multi-storey parking system for cars and bikes. It would allow compact parking of more vehicles in less space by stacking them across multiple levels. The levels could be above or below ground, accessed by ramps or lifts. The system aims to address lack of parking space in dense urban areas. It is expected to provide parking at lower cost per space than conventional parking lots while using less total area of land.

Uploaded by

Pratik Chaudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

PROJECT ON

MULTISTOREYED CAR
AND
BIKE PARKING
SYSTEM
Submitted to:- Prof. J.R.Bhavsar
Submitted by:- DE Group 4AG-2
ABSTRACT
Multi-Storey Car Parking is a method of parking
and retrieving cars that typically use a system of
pallets and lifts. The intension is to compact more
cars in the same space , reduce the space needed to
park the same number of cars. Car parks can be
situated above or below ground or a combination of
both. This makes the system modernized and thus
space saving one.
INTRODUCTION
Multilevel or multi-storey parking buildings are
parking buildings that have multiple floors to park at.
The design of a multilevel parking building can be
very different. The most common design is a building
with ramps to move from one level to another. Less
common are that who use lifts to go from level to
level. Then there are also parking buildings with
robotic systems that move cars from one level to
another. The floors of the parking building can either
go up, down or both.
THEORY OF PROJECT
The concept of the building is same but we have
thought of a new design in which we can park bike
and scooter along the building. At the enter and
exit gate we can use interior ramps or vehicle lifts.
In the buildings center we can make parts so that
we can park bike and scooter under that.
The building of the design can be made from
same material which is used in other buildings.
This type of design will help the bike and scooter
owners who cant find parking place in the city
where the traffic is too much. It will also help the
car owners as well.
ADVANTAGES
Any like Newyork, Delhi, London has over five
million cars and two-wheelers on its roads, but not
enough parking spaces. The demand for parking
space has, on an average in the main markets of
Delhi, outstripped demand by 43 per cent. It is not
just a problem of Delhi or Mumbai; all the big cities
in India are facing the space crunch.
Parking space is fast becoming a major issue in
other cities like Kolkata, Bangalore, Hyderabad,
Ahmedabad, Chandigarh, Pune and other urban
and semi-urban cities. Multi-storey car parks
provide lower building cost per parking slot, as
they typically require less building volume and
less ground area than a conventional facility with
the same capacity
DISADVANTAGES
Drivers who use multi-story parking facilities,
sometimes known as parking garages, often
enjoy a number of benefits the structures
provide. Despite the ability of the garages to
house a large number of cars, multi-story
parking facilities also carry a number of distinct
disadvantages that arise from their tall, enclosed
and often dimly lit nature.
REVERSE
ENGINEERING

Reverse Engineering, also calledback engineering, is


theprocessesof extracting
knowledgeordesigninformation from anything man-
made and re-producing it or re-producing anything
based on the extracted information. The process often
involves disassembling something (amechanical
device,electronic component, computer program, or
biological, chemical, or organic matter) and analyzing
its components and workings in detail.
The reasons and goals for obtaining such
information vary widely from everyday or socially
beneficial actions, to criminal actions, depending
upon the situation. Often nointellectual property
rightsare breached, such as when a person or
business cannot recollect how something was done,
or what something does, and needs to reverse
engineer it to work it out for themselves.

You might also like