Scribd
Upload
53 views

Umts Ho Intrafreq

The document discusses UMTS intra-frequency handover strategies. It describes intra-frequency handover as handover triggered based on measurements of Ec/No or RSCP through the IntraMeasQuan parameter. It discusses maintaining a list of up to 32 neighboring intra-frequency cells by prioritizing cells and removing lower priority cells if needed. It also outlines several intra-frequency measurement events that define criteria for triggering intra-frequency handover, such as a primary CPICH entering or leaving the reporting range or a non-active cell becoming better than an active one.

Uploaded by

pote
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
53 views

Umts Ho Intrafreq

The document discusses UMTS intra-frequency handover strategies. It describes intra-frequency handover as handover triggered based on measurements of Ec/No or RSCP through the IntraMeasQuan parameter. It discusses maintaining a list of up to 32 neighboring intra-frequency cells by prioritizing cells and removing lower priority cells if needed. It also outlines several intra-frequency measurement events that define criteria for triggering intra-frequency handover, such as a primary CPICH entering or leaving the reporting range or a non-active cell becoming better than an active one.

Uploaded by

pote
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

UMTS_HO

UMTS Handover Overview


Handover types:
Soft handover
Softer handover
Hard handover
Handover technology:
Intra-frequency handover
Inter-frequency handover
Inter-RAT handover
Handover steps:
Measurement
Handover decision
Handover implementation
UMTS Intra-Frequency Handover Strategy
Intra-Frequency Handover
The intra-frequency handover can be triggered based on Ec/No or RSCP measurement through the parameter IntraMeasQuan.
Active set
Monitored set
Detected set

Neighboring Cells Configuration

If the number of intra-frequency neighboring cells exceeds 32, it needs to delete some cells to ensure that there are only 32 intra-frequency
neighboring cells.
Priority combination strategy
Sorting strategy
Cell Priority
The OMCR configuration parameter MeasPrio is used to define the priority of adjacent cells and includes three values:
0: High priority
1: Medium priority
2: Low priority
UMTS Intra-Frequency Handover Strategy

Intra-frequency measurement events

A series of intra-frequency measurement events are defined in 3GPP as the judgment and trigger
criteria for intra-frequency handover.

Event 1A: A Primary CPICH enters the Reporting Range.


Event 1B: A Primary CPICH leaves the Reporting Range.
Event 1C: A Non-active Primary CPICH becomes better than an active Primary CPICH.
Event 1D: The best cell changes.
Merci

You might also like