Scribd
Upload
58 views

Current & Resistance: - Current and Current Density - Ohm's Law - Resistivity - Resistance

Current is carried by charge carriers (electrons) drifting through a conductor under the influence of an electric field E. The current density J is proportional to E, with the constant of proportionality being the material's conductivity σ. Resistance R is directly proportional to resistivity ρ and length L of the material, and inversely proportional to its cross-sectional area A. Ohm's Law states that the potential difference V across a conductor is equal to the current I through it multiplied by the resistance R.

Uploaded by

Pedro
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
58 views

Current & Resistance: - Current and Current Density - Ohm's Law - Resistivity - Resistance

Current is carried by charge carriers (electrons) drifting through a conductor under the influence of an electric field E. The current density J is proportional to E, with the constant of proportionality being the material's conductivity σ. Resistance R is directly proportional to resistivity ρ and length L of the material, and inversely proportional to its cross-sectional area A. Ohm's Law states that the potential difference V across a conductor is equal to the current I through it multiplied by the resistance R.

Uploaded by

Pedro
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 17

Current & Resistance

- Current and current density


- Ohms Law
- Resistivity
- Resistance
Electrical Current
CURRENT I is the amount of positive charge
flowing past a fixed point in the wire per unit time :
dQ
I if charge dQ flows in time dt
dt
Units: 1 ampere (A) = 1 C/s

Direction: by convention, current is the direction


of movement of positive charge

+ + + - - -
+ + + - - -
I
I
Electron Velocities
Random velocities of electrons are large (several km/s)
Drift velocity is a slow, average motion parallel to E

no field +
E F (e) E

end
end
start start
net displacement
Determining the current

+ + + + + +
E
+ + + + + +

L = vd Dt

Charge Q in length L of wire passes through the


shaded disk of area A in time t :

Q = (number of charge carriers/volume) x


(charge on each one) x volume
Charge: DQ = n q V
= n q (AL)
= n q A vd Dt (since L=vt)

Current: I = DQ/Dt = nqAvd Dt /Dt


So, I = nqAvd

vd = average (drift) velocity of each charge


q = charge on each particle
n = number of charge carriers per unit volume
A = cross section area
L = length
AL = volume
Example The mobile charges in most metals are electrons,
with about one or two electrons per atom being
free to move. So there are about 1023 charges
per cm3 (or 10 29 m-3).

n 1029 electrons/m3
nq ne 1.6 1010 C/m3

Take Area = 1 mm2, assume I = 1 A

vdrift 0.06 mm/s

Which way are the electrons moving?


E = 0 inside ?
Note: in electrostatics, we had E=0 inside a conductor, if
not, charges would move, the conductor would not
be in equilibrium and there would be a current.

For a wire to carry a current, we must have an electric


field inside the conductor, which is caused by the
potential difference between the ends of the wire.
This is no longer electrostatics!
Example
A copper wire of cross sectional area 3x10-6 m2 carries a
current of 10A. Find the drift velocity of the electrons in
this wire. Copper has a density of 8.95g/cm3, and atomic
weight of 63.5g/mole. Avagadros number is 6.02x1023 atoms.
Assume each atom contributes one free electron.
Questions

When you turn on a flashlight, how long does it take for


the electrons from the battery to reach the bulb?

What happens to the wire as the electrons go through


it?

If you double the electric field in the wire, does the


acceleration of the electrons double?

If the electric field remains constant, how do the


electron kinetic energies change with time?
Current Density J

The current density is defined as the current per unit area


in a conductor, where A is the cross section of conductor.
The current density is a vector quantity, units: Amps/m2.

I
J And since I=nqAvd; J nqv d
A
now v d is proportional to the electric field
Where is a constant called the
so J E conductivity of the material.

The current density J and the electric field E are both


established in a conductor as a result of a potential
difference across the conductor.
Because J is proportional to the field, current in a wire is
proportional to the potential difference between the ends
of the wire.
L

A E

Uniform E V EL

J E I V
V I
L
A L A
Resistance, R
RESISTIVITY: the inverse of conductivity.
1 (this depends on

the type of material)

L
V I
A
IR Ohms Law

L (Uniform wire, Length L,


where R
A cross-section area A)

volt
Unit of resistance R is: 1 ohm () 1
amp
Ohms Law
Current density field: J=E
Current potential difference: V = IR

= resistivity, has units of m

A
m2 1
= conductivity units,
V m
m
Resistivities of a few materials

(20C)
(m)
Cu 1.7 x 10-8
Al 2.8 x 10-8
Graphite 3500 x 10-8
Si 640
Quartz ~ 1018
Example
A copper wire, 2 mm in diameter and 30 m in length, has
a current of 5A. Find:
a) resistance 1.7 108 m for Cu
b) potential difference between the ends
c) electric field
d) current density
Quiz
The wire in the previous example is replaced with
a wire of the same length and half the diameter,
carrying the same current. By what factor will
each of the following change?

A) resistance
B) potential difference between the ends
C) electric field
D) electron number density
E) electron drift speed
F) current density
Summary

Current Density: J I
A nqvd
Conductivity: :

J E (defines )
1
Resistivity:

L
Resistance: R
A
Ohms Law: V IR

You might also like