Scribd
Upload
217 views

Making of Brick by The Using of Red

This document summarizes a study that used red brick dust to make bricks and compared their compressive strength to fly ash bricks. Bricks were made with different ratios of red brick dust, fly ash, stone dust, lime, gypsum and cement. The bricks were cured for 7 days and then tested to determine their compressive strength. Testing found that bricks with a ratio of 50% red brick dust, 30% stone dust and 20% cement had the highest compressive strength of both red brick dust bricks and fly ash bricks.

Uploaded by

Anubhav shukla
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
217 views

Making of Brick by The Using of Red

This document summarizes a study that used red brick dust to make bricks and compared their compressive strength to fly ash bricks. Bricks were made with different ratios of red brick dust, fly ash, stone dust, lime, gypsum and cement. The bricks were cured for 7 days and then tested to determine their compressive strength. Testing found that bricks with a ratio of 50% red brick dust, 30% stone dust and 20% cement had the highest compressive strength of both red brick dust bricks and fly ash bricks.

Uploaded by

Anubhav shukla
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 18

Making of bricks by using of

red brick dust comparing with


compressive strength of fly ash
bricks
BY

ANUBHAV SHUKLA
ANKUR VERMA
ANKIT KUMAR RAWAT
ADITYA RAJPOOT
DHIRAJ KUMAR
ARCHNA VERMA

Under the guidance of respected ( H.O.D. Sir)


Dr. NAKUL GUPTA
Content
Introduction
Material used for bricks
Mixing of material
curing process
Percentage of brick material
compressive Strength of the bricks
testing of specimen
Failure of the bricks
Conclusion and results
Introduction
Red brick dust is the demolished waste of
building. This waste of the bricks is used for
making of red brick dust brick . This
demolished waste is collected from the
building and also from the construction
place. This red brick dust is used for
replacement of fly ash with their suitable
percentage .
This type of red brick dust brick gives the
higher strength as compared to fly ash bricks
Material used for red brick dust bricks and fly ash
bricks

RED BRICK DUST FLY ASH STONE DUST

LIME PPC GYPSUM


Mixing of material

Mixing of material Moulds Filing of materials in


moulds

After removing of Removing of mould Brick with frog


moulds from brick
After making of all bricks with their suitable
percentage

There are 12 bricks are made by the moulds


where 6 bricks is flyash and 6 brick red brick
dust .
This bricks are having a 3 ratio and 2 bricks of
flyash and 2 bricks of brick dust having a same
ratio.
After the 7 days of curing this bricks are filled
the frog by the ratio of 1:3.
For flyash brick in this ratio taken 1part cement
and 3 part flyash.
For red brick dust this ratio is 1part cement and
3part red brick dust
after 24 hour natural drying of this bricks curing
for 3 days.
Bricks are in the curing tank
for the 7 days after curing .
The size of the bricks
70mmX 120mmX230mm.

This bricks after the frog


filled and 3 days curing
then send for the testing of
the bricks in the lab
Specimens after 7 days curing
percentage for the bricks

Fly ash Red bricks dust

first ratio
Flyash-55%
Stone dust-25% First ratio
Lime-15% Red brick dust-55%
Gypsum-5% Stone dust-25%
Ppc-20%
Second ratio
Fly ash -60% Second ratio
Stone dust-20% Red brick dust-60%
Lime-12% Stone dust -20%
ppc-20%
Gypsum-8%
Third ratio Third ratio
Flyash-50% Red brick dust -50%
Stone dust-35% Stone dust -30%
Lime-10% Ppc-20%
Gypsum-5%
Calculation of compressive strength

Size of the brick = 70mmX120mmX230mm


Face area of the brick = 120mmX230mm

Compressive strength of brick =

Load of the brick (KN)


face area of the brick (mm2)
Compressive strength of fly ash brick

Ratio no. Load (KN) Compressive


strength (MPa)

1. 298 10.7

292.3 10.5

2. 250 9.05

271 9.81

3. 330 11.9

336.5 12.92
Graph for fly ash bricks

7 days Avg compressive strength


Avg. Compressive strength (Mpa)

14
12 12.41
10.6
10
9.405
8 7 days Avg
6 compressive
strength
4
2
0
55% 60% 50%
Percentage of fly ash
Compressive strength of Red brick dust

Ratio no, Load (KN) Compressive


strength (MPa)

1. 356 12.89

361.4 13.09

2. 308 11.15

312.4 11.31

3. 398.4 14.43

422 15.28
Graph for red brick dust brick

7 days copressive strength


Avg. compressive strength (Mpa)

16
14.85
14
12.99
12
11.23
10
8 7 days
copressive
6 strength
4
2
0
55% 60% 50%
Percentage of red brick dust
Testing of the specimens
Failure of the bricks
Conclusion

All 3 ratio are considered and we see that


the third ratio Is best proportion of the
material .In the third ratio
1. Red brick dust-50%,
2. stone dust-30% ,
3. cement 20%.

This composition of the bricks is very good


because of this ratio is gives the maximum
compressive strength.

You might also like