Scribd
Upload
237 views

Routing Protocols RIP, OSPF, BGP

- Hierarchical routing divides large networks into smaller subnetworks (areas) to improve scaling and allow independent administration. Protocols like RIP, OSPF, and BGP use different metrics and policies to dynamically share routing information. - OSPF uses link state routing within an autonomous system. Routers flood their local network topology to all other routers and calculate the shortest paths using an algorithm like Dijkstra. Areas and route summaries optimize routing between subnetworks.

Uploaded by

Taha Khan
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
237 views

Routing Protocols RIP, OSPF, BGP

- Hierarchical routing divides large networks into smaller subnetworks (areas) to improve scaling and allow independent administration. Protocols like RIP, OSPF, and BGP use different metrics and policies to dynamically share routing information. - OSPF uses link state routing within an autonomous system. Routers flood their local network topology to all other routers and calculate the shortest paths using an algorithm like Dijkstra. Areas and route summaries optimize routing between subnetworks.

Uploaded by

Taha Khan
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 22

Dynamic routing

Routing Algorithm (Dijkstra / Bellman-Ford) idealization


All routers are identical
Network is flat.
Not true in Practice

Hierarchical routing
Internet = network of networks
Each network admin may want to control routing in its own
routing network.
Hierarchical routing solves
Scale problems.
Administrative autonomy.
Routing Protocols RIP, OSPF, BGP

Dynamic protocols
Sharing neighborhood information
Use different metrics.
RIP (one hop count, how many networks a packet crosses), Networks are treated equally
BGP (depend on the policy, set by administrator)
OSPF (TOS, minimize delay, maximize throughput)
Routing Information Protocol RFC 1058
Receive a RIP message (a response)
Add one hop for each advertised dest
Repeat
If (dest not in routing table)
Add the advertised info to the
table
Else
If (next-hop is the same)
Replace with the
advertised one
Else
If (advertised hop count <
one in the table)
Replace entry in the
routing table
http://www.faqs.org/rfcs/rfc1058.html Return
Distance vector algorithm (Bellman-Ford)
Sharing knowledge about the entire AS
Shares only with neighbors
Shares at regular intervals (different from DVA)
Initializing and Updating Routing Table

Destination Metric Gateway


Dest D G

Rule to implement RIP based in DVA


If Information is not from G
Update to reflect minimum cost
If Information is from G
Always update
RIP message format
RIP messages uses UDP
datagrams on port 520
Implemented in Unix systems by
the routed daemon.
Size of datagram limited to 512
bytes (allow advertisement of 25
routes.

Command: 8 bits
Request (1), reply (2)
Version: 1 or 2
Family: of protocol used for
TCP/IP it is 2
Network address : 32 bytes
Distance: hop count from the
advertising router to the
destination network

Response: solicited or unsolicited.


RIP message example
RIP timers

Periodic timer: control advertising of regular update messages (25-35 sec)


Expiration timer: governs the validity of a route (180 sec)
Every time an update (on a 30 sec average) is received the timer is reset
If no update received within this timer the metric is set to 16
Garbage timer: 120 sec
A route can be advertised with a 16 metric for 120 sec before it get purged
Allow neighbors to have knowledge of the invalidity of a route
Slow Convergence Problem

Solved by limiting number of hops to 15, 16 means


That the destination is unreachable
RIP Instability

Triggered Updates

Split Horizons

Poison reverse
Border Gateway Protocol (RFC 1771)
Based on the path vector routing.
Distance-vector protocol not preferred for inter-AS routing (exterior routing
protocol)
Assumes all routers have a common distance metrics to judge route preferences.
If routers have different meanings of a metric, it may not be possible to create stable, loop
free routes.
A given AS may have different priorities from another AS.
Gives no information about the ASs that will be visited.
Link-state routing protocol
Different metrics.
Flooding is not realistic.
Path vector routing
No metrics,
Information about which networks can be reached by a given router and ASs to be
crossed.
Differs from DVA
Path vector approach does not include a distance or cost estimate
Lists all of the ASs visited to reach destination network.
BGP (continued)

Messages are sent over TCP connections on port 179.


Functional procedures
Neighbor acquisition (open message, acceptance through Keepalive message)
Neighbor reachability (periodic Keepalive messages)
Network reachability (broadcast an update message)
Each routers maintains a database of networks that can be reached
+ preferred route to this network.
RFC does not address
How a router knows the address of another router.
Up to network admin.
BGP (cont.)
Example of Network Reachability Example of Message adverstisements

Network Next router Path


N1 R1 AS14,AS23,AS67
N2 R5 AS22,AS67,AS5,AS89
N3 R6 AS67,AS89,AS9,AS34
N4 R12 AS62,AS2,AS9

Loop Prevention in BGP:


Checks the Path before updating its
database. (If its AS is in the path
ignore the message)
Policy Routing:
If a path consist of an AS against
the policy of the current AS,
message discarded.
BGP message format (Open, Keepalive,
Update, Notification
Open Shortest Path First (RFC 1247)
Uses IP, has a value in the IP Header (8 bit protocol field)
Interior routing protocol, its domain is also an autonomous system
Special routers (autonomous system boundary routers) or backbone routers
responsible to dissipate information about other AS into the current system.
Divides an AS into areas
Metric based on type of service
Minimum delay (rtt), maximum throughput, reliability, etc..
OSPF (type of links)
OSPF (link state advertisement)

Network Link
Router Link
OSPF (LSA cont.)

Summary link to Network

Summary link to AS boundary router

External Link
Shortest Path Calculation
Types of OSPF packets and header format
Link State Update Packet
A router link example
LSA header not covered
Refer to RFC 1247
A Network Link Example
Summary Links state Advertisements

Summary link to network

Summary link to AS boundary

External Link

You might also like