Scribd
Upload
169 views

Final Year Project

This document summarizes a student project to control fan speed based on temperature. The objectives are to measure room temperature, display it on an LCD, and vary the fan speed accordingly to reduce power consumption. The methodology uses an LM35 temperature sensor connected to a microcontroller to read temperature values and control a brushless DC motor fan speed through a MOSFET. When temperature increases, fan speed increases to maintain comfort while using less energy than a conventional on/off fan. Potential applications include computers, UPS systems, appliances, and audio/video devices.

Uploaded by

FaIzAn kHaN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
169 views

Final Year Project

This document summarizes a student project to control fan speed based on temperature. The objectives are to measure room temperature, display it on an LCD, and vary the fan speed accordingly to reduce power consumption. The methodology uses an LM35 temperature sensor connected to a microcontroller to read temperature values and control a brushless DC motor fan speed through a MOSFET. When temperature increases, fan speed increases to maintain comfort while using less energy than a conventional on/off fan. Potential applications include computers, UPS systems, appliances, and audio/video devices.

Uploaded by

FaIzAn kHaN
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 21

Speed control of fan according

to temperature
Prepared by :
FAIZAN KHAN (14-BEE-8012)
MD. ZIAUL HAQUE (14-BEE-8034)
MOHD. SHAHZAD (14-BEE-8042)

Supervisor :
PROFESSOR ANWAR SHAHZAD SIDDIQUI

Faculty of Engineering & Technology


Jamia Millia Islamia
New Delhi
Introduction

Objectives

Literature Review

Methodology

Result and Discussion


The idea behind this project is to control the speed of fan
using microcontroller based on variation in temperature.

Temperature controlled fan is an


alternative way to deal with the speed
of the motor.
Temperature control is a process in
which the temperature of an object is
measured and the passage of heat
energy into or out of the object is
adjusted to achieve a desired
temperature.

Fig:1.1. Temperature
Controlled fan
Objectives

Measure the room temperature

Display the current temperature in the LCD

Vary the speed of fan accordingly

Reducing the power consumption


According to Tito Smailagich, given the
high cost of electrical power, replacing a
conventional on/off temperature control
with a proportional controller can often
save energy and money.

Lawrence Berkeley National


Laboratory in their articles
mentioned that in the
manufacturing sector, fans use
about 78.7 billion kilowatt-hours
of energy each year.

Fig:1.1. Temperature Controlled


Fan
Global Potential Energy Savings
As seen in Table 1, achieving 50% reduction in power consumption using BLDC motors is cost
effective. A combination of BLDC motors and efficient blades can reduce the consumption further.
Block diagram

Fig:3.1. Temperature based fan speed controller


Flow Chart

Fig:3.1. Flow Chart of temperature based fan speed


controller
Methodology

PRINCIPLE OF OPERATION OF TEMPERATURE BASED FAN


SPEED CONTROLLER

In this project we are using LM35 series analog


temperature sensor. This is a precision integrated
circuit, whose output voltage is linearly
proportional to the Celsius (Centigrade)
temperature.

It is rated to operate over a -55 degree to +


150 degree Celsius temperature range. It has
+10.0mV/Celsius linear scale factor. The
output of this sensor will be connected to
ATMEGA-32 Micro-controller s PORT-A.

Fig:3.2. Operation of a Metal Detector


Methodology
COMPONENTS

1. LM35(TEMPERATURE SENSOR)
2. ATMEGA32 micro-controller unit
3. Brushless variable speed DC Motor [DR-6634-514]
4. N-MOSFET (BUK9575-100A)
5. Resistors (10k ohm, 1k ohm)
6. LM7805 Voltage regulator IC
Methodology
MAJOR COMPONENTS

Fig:3.2. LM35(TEMPERATURE SENSOR)


2.

Fig:3.2. ATMEGA32 micro-


controller unit
Fig:3.2. N-MOSFET (BUK9575-100A)
Methodology
APPLICATIONS

Personal computers

Exhaust fans in UPS

Washing machines

CD and DVD players


Advantages and disadvantages

Advantages-
(1) Since it is an automated system ,it is programmed effectively so
that no interruptions would stop its functionality.
(2)To monitor the environment, that is not comfortable or possible
to monitor for humans(especially for extended periods of time)
(3) Prevents waste of energy.

Disadvantages-
(1) It can only be maintained by technical person .
(2) Due to temperature variation, after sometimes its efficiency
may be decreased .
Thank you

You might also like