Scribd
Upload
273 views

Cuck Converter

The document proposes a Cuk converter-based charging system to improve energy harvesting. It uses an incremental conductance maximum power point tracking technique to maximize the output power from charging systems. The proposed system aims to increase energy gain compared to existing systems using other DC converters. Simulation results show the Cuk converter provides regulated output voltage despite supply and load variations, making it suitable for battery charging applications.

Uploaded by

Technos_Inc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
273 views

Cuck Converter

The document proposes a Cuk converter-based charging system to improve energy harvesting. It uses an incremental conductance maximum power point tracking technique to maximize the output power from charging systems. The proposed system aims to increase energy gain compared to existing systems using other DC converters. Simulation results show the Cuk converter provides regulated output voltage despite supply and load variations, making it suitable for battery charging applications.

Uploaded by

Technos_Inc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 14

Modeling and Simulation of

Incremental Switched Inductor


Algorithm Based Charging System
using CUK Converter
OBJECTIVE
• To improve the Energy harvesting by using the
Cuk Convertor model for an purpose of real time
Charging Applications
ABSTRACT
• This paper proposes Cuk converter based power factor correction converter is
proposed which offers high step-down gain, low current stress, high efficiency and
reduced component counts

• Due to poor efficiency of charging systems some Switched Inductor methods are
proposed. All Switched Inductor methods follow the same goal that is maximizing
the charging system output power by tracking the maximum power on every
operating condition. .

• In this paper maximum power point tracking technique (Incremental conductance)


for Charging systems were introduced to maximize the produced energy.
EXISTING SYSTEM
• Existing system using the some other DC
convertors for the purpose of increasing the
energy gain.
• But the harvested energy was low when
compare to the Proposed system.
DRAWBACKS
• Harvested energy was low compare to the
Proposed system
• No Power Point tracking for the Previous
systems.
• High Production Cost
PROPOSED SYSTEM
• A Charging system converts DC Voltage into
Battery Storage.
• The basic device of a Charging system is the
Charging cell.
• Cells may be grouped to form modules. Battery
can be grouped to form large Charging arrays.
• At time of instance we are using Cuk convertor
for the purpose for increasing the energy from the
Charging battery's
CUK CONVERTOR
Parallel Resistance for Cuk Convertor
SWITCHED INDUCTOR CUK
CONVERTER
HARDWARE BLOCK DIAGRAM
TOOLS AND SOFTWARE USED:

• MP LAB
• ORCAD/PSPICE
• MATLAB/SIMULINK

• OUTPUT:
• HARDWARE
• SIMULATION
Basic CUK Simulation
BASIC CUK SIMULATION RESULT
CONCLUTION
• The switched inductor Cuk converter based
improved power quality AC-DC converter is
proposed for battery charging application.
• The design, simulation and hardware
implementation of proposed converter are carried
out.
• The simulation results are obtained under various
loading conditions and results demonstrate that
the proposed converter is able to provide
regulated output voltage irrespective of supply
and load variations.

You might also like