Scribd
Upload
26 views

17-7 Drainage Installation With Hot and Cold Water Supply

This document lists the materials needed for a plumbing installation in a two-story building with a basement. It includes pipes, fittings, valves, and fixtures for the drainage system, soil stack, soil and waste branches, waste and vent pipes, cold water supply, hot water supply, and various plumbing fixtures and accessories. PVC and copper pipes, elbows, tees, traps, and other fittings are specified for the drain, waste, and vent system as well as the cold and hot water supply lines. Fixtures such as toilets, bathtubs, sinks, and showers are also included.

Uploaded by

Mark Real Jubilo
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
26 views

17-7 Drainage Installation With Hot and Cold Water Supply

This document lists the materials needed for a plumbing installation in a two-story building with a basement. It includes pipes, fittings, valves, and fixtures for the drainage system, soil stack, soil and waste branches, waste and vent pipes, cold water supply, hot water supply, and various plumbing fixtures and accessories. PVC and copper pipes, elbows, tees, traps, and other fittings are specified for the drain, waste, and vent system as well as the cold and hot water supply lines. Fixtures such as toilets, bathtubs, sinks, and showers are also included.

Uploaded by

Mark Real Jubilo
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

17-7 DRAINAGE

INSTALLATION
WITH HOT AND
COLD WATER
SUPPLY
A PLUMBING INSTALLATION OF
A TWO-STOREY BUILDING WITH
A BASEMENT. THE FOLLOWING
MATERIALS ARE REQUIRED:
A. Materials for House Drain
1 – 100 mm x 3.00 meters Pvc soil pipe
1 – 100 mm x 50 mm Tee to receive waste stack
1 – 100 mm x 100 100 mm Tee
1 – 100 mm long sweep elbow for cleanout
B. Materials for Soil Stack
3 – 100 x 3.00 meters Pvc soil stack
1 – 100 x 50 mm Y
2 – 100 x 100 mm Tee
1 – 100 x 50 mm cross Tee

C. Materials for Soil Branch


2 – 100 mm long sweep elbow
2 – 100 mm Tee
2 – 100 mm for cleanout
1 – 100 mm x 50 mm Tee
1 – 38 mm 50 mm reducer
1 – 38 mm ¼ bend elbow
D. Materials for Waste Branch
1 – 50 mm 1/8 bend elbow
2 – 50 mm Tee
1 – 50 mm long sweep elbow for c.o
1 – 50 mm cleanout cover
1 – 50 mm x 38 mm reducer
1 – 38 mm ¼ bend elbow
1 – 100 mm drum trap
1 – 38 mm 3.00 meters Pvc. pipe

E. Materials for waste and Vest Pipes


7 – 50 mm Tee
2 – 50 mm ¼ bend elbow
7 – 50 mm x 3.00 meters Pvc pipe
F. Materials for Cold Water Supply
2 – 20 mm x 3.00 m. Pvc
2 – 20 mm gate valve
1 – 20 mm Tee
1 – 20 mm x 12 mm elbow reducer
10 – 12 mm ¼ bend elbow pain
8 – 12 mm ¼ bend elbow one end threaded
8 – 12 mm Tee plain
2 – 12 mm Tee one end threaded
10 – 12 mm x 3.00 Pvc pipe
1 – 2 0 mm x 3.00 Pvc pipe
2 – pint solvent cement
5 – rolls Teflon tape
G. Copper pipe for Hot Water Supply
1 Set heater with relief valve, faucet
and accessories
10 – 10 mm x 3.00 copper pipe
7 – 10 mm elbow
2 – 10 mm gate valve
8 – 10 mm Tee
4 – 10 mm elbow
H. Fixtures and Accessories
7 – 10 mm control valve and supply pipe
2 – Hot & cold mixing valve for shower and
bath
2 – Hot & cold mixing valve for lavatories
2 – Hot & cold mixing valve for kitchen sink
2 – Sets Water Closet with tank and
accessories
1 – Set Bathtub with drum trap and
accessories
2 – Lavatories with p-trap and faucets
2 – Kitchen sink with p-trap and strainers
2 – Shower head
THANK YOU!

You might also like