Scribd
Upload
54 views

Fuel System

The document discusses the main components of a fuel system for a gasoline engine, including the carburetor which mixes air and fuel, the venturi which uses pressure differences to draw in fuel, and various carburetor parts that control the air-fuel ratio for different engine conditions like idling, acceleration, and cruising speed. It also covers the choke system, fuel pump, fuel lines, and fuel tank that work together to deliver the proper fuel-air mixture to the engine.

Uploaded by

IanArvinGalicia
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
54 views

Fuel System

The document discusses the main components of a fuel system for a gasoline engine, including the carburetor which mixes air and fuel, the venturi which uses pressure differences to draw in fuel, and various carburetor parts that control the air-fuel ratio for different engine conditions like idling, acceleration, and cruising speed. It also covers the choke system, fuel pump, fuel lines, and fuel tank that work together to deliver the proper fuel-air mixture to the engine.

Uploaded by

IanArvinGalicia
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 19

Fuel System

Carburetor

•A device that mixes air and fuel


in correct proportion for
efficient combustion.

•Stoichiometric Ratio
14.7 : 1 (Air : Fuel)

•CFM of air flow:Cubic feet of


air per minute
Fuel System
Venturi

•Venturi works on high-low pressure.


•As the air speeds up when passing through the air horn(venturi), it
creates vacuum, causing suction to pull fuel from the discharge tube.
Fuel System
Carburetor Parts

Air horn/throat routs outside air into the engine intake manifold.

Throttle plate is a butterfly valve that restricts air flow through the carb,
and this restriction reduces the amount of fuel flowing through the engine.
Fuel System
Carburetor Parts

•Discharge tube uses venturi to discharge fuel into the air horn.
•Needle valve (Idle mixture screw) controls the amount of fuel
passing through the discharge tube
Fuel System
Carburetor Parts
Fuel System
Carburetor Parts
•Idle speed screw sets the engine’s idle speed (800 RPM).
•Float rides on top of the fuel in the bowl to open and close the needle
valve. Maintains the correct level of fuel.
Fuel System

Gasoline engine’s air fuel mixture may vary from rich (8:1) to lean (18:1)

•8:1 for cold starting.


•16:1 for idling.
•15:1 for part throttle.
•13:1 for full acceleration.
•18:1 for normal cruising at highway speeds.

An automobile carburetor must be capable of providing


varying air fuel ratios.
Fuel System
Idle system

•Feeds fuel into air horn when the


throttle is closed (low engine
speed).

•High vacuum below the throttle


plate pulls fuel from the idle port.

•Idle mixture screw allows


adjustment of fuel at idle.

•Air bleed helps premix air and fuel.


Fuel System
Off idle system feeds fuel to the engine when the throttle is opened slightly.
•It adds a little extra fuel to the extra air flowing around throttle valve
Fuel System
Acceleration System

•Accelerator pump squirts fuel into the


air horn every time the throttle is opened.

•This adds fuel to the rush of air entering


the engine and prevents a temporary
lean mixture.

•Pump check ball allows fuel to only


enter the pump reservoir.

•Pump check weight prevents the fuel


being drawn into the air horn by the
venturi vacuum.
Fuel System
Accelerator pumps systems use mechanical linkage from
the throttle lever.
•Upon acceleration, both the throttle valve and pump are actuated.
Fuel System
High speed system (cruising speed)

•The main jet controls the fuel flow and


mixture.

•At higher engine speeds, there is enough


air flow through the venturi to produce
vacuum.

•This pulls fuel through the main


discharge.
Fuel System
Choke System
•When the engine is cold the
thermostatic spring closes the choke.

•High vacuum below the choke pulls large


amounts of fuel out of the main discharge.

•When the engine warms the hot air opens


the spring

•Some chokes are electrically operated.


Fuel System
Fuel pump(mechanical pump operated by cam shaft)

Operates at 3-5 psi.


Fuel System
Fuel Lines (double-lap flair)
•Pressure line brings the fuel from the tank.
•Return line takes the excess fuel back to the tank.
Fuel System
Fuel tank

•Holds fuel.

•Holds fuel sending unit float.


Fuel System
Fuel filter is installed in the pressure line to remove contaminants.
Carburetor Problems
•Carburetor Flooding: Occurs when fuel pours out the top of
the carburetor. Check float level (might be too high).

•Float level too low: Will cause lean AFR. Will cause miss at
high speed and around cornering.

•Clogged idle air bleed: Will effect at Idle, because it can enrich
the mixture.

•Engine Surge: Caused by extremely lean Air Fuel mixture.

•Choke system: will make the engine perform poorly when the
engine is cold.
Fuel System
Credits:
Google search engine

You might also like