Scribd
Upload
38 views

Timber Doors and Windows

Timber doors and windows must meet specifications for material type, seasoning, and sizing. Acceptable timber includes teak, shisham, sal, and deodar, and must be seasoned according to IS 1141 standards. Timbers must be free of defects like decay, fungal growth, pitch pockets, borer holes, splits and cracks, and must be straight with smooth, planed edges meeting at right angles. Door frames must be 140 x 65 mm while window and ventilator frames must be 100 x 50 mm, with a general tolerance of +3 mm.

Uploaded by

Shubham Goel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
38 views

Timber Doors and Windows

Timber doors and windows must meet specifications for material type, seasoning, and sizing. Acceptable timber includes teak, shisham, sal, and deodar, and must be seasoned according to IS 1141 standards. Timbers must be free of defects like decay, fungal growth, pitch pockets, borer holes, splits and cracks, and must be straight with smooth, planed edges meeting at right angles. Door frames must be 140 x 65 mm while window and ventilator frames must be 100 x 50 mm, with a general tolerance of +3 mm.

Uploaded by

Shubham Goel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 3

Timber Doors and windows

Specifications

By- Ar Sonu Rai


Timber shall be of the kind as specified may be teak ,
shisham,sal,deodar etc.

Seasoning of Timber shall be in accordance with IS 1141. The timber


shall be free from decay, fungal growth, pitch pockets, streaks on the
exposed edges, borer holes, splits and cracks. All members shall be
straight without any warp or bow and shall have smooth, well planed
edges at right angles to each other
Sizes of Frames (Unless shown differently on drawings) Door Frame: 140 x
65 mm Window/Ventilator Frame: 100 x 50 The general tolerance allowed
shall be + 3 mm

You might also like