Scribd
Upload
50 views

Hybrid Power System For DC Loads

Better way to promote the usage of DC power supply inside house hold rather than converting the entire grid to DC. contact me for more accurate details on the project

Uploaded by

Sudarshan Anbazhagan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
50 views

Hybrid Power System For DC Loads

Better way to promote the usage of DC power supply inside house hold rather than converting the entire grid to DC. contact me for more accurate details on the project

Uploaded by

Sudarshan Anbazhagan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 16

Hybrid Power System for DC Loads

PRESENTED BY : A.Sudarshan, K. Balakumar, J. Bharath Roger

AREA OF THE PROJECT : Power System

GUIDE : S. Rajesh Babu AP/EEE

10/15/2018 DEPARTMENT OF EEE 1


OBJECTIVES
 To integrate DC loads with minimum converters
 Renewable energy sources integration.
 Reduction of end equipment size and cost

10/15/2018 DEPARTMENT OF EEE 2


DIAGRAM OF PROPOSED SYSTEM

10/15/2018 3
DEPARTMENT OF EEE
Layout

Solar
Power
Grid
48V

10/15/2018 DEPARTMENT OF EEE 4


DESCRIPTION OF THE PROJECT WORK

• We simulated the various systems in our project.


• The Converters are designed for meeting our systems needs.
• The systems are built and prototype are designed.
• The system prototyped and tested under various load
conditions.

10/15/2018 DEPARTMENT OF EEE 5


Switch Mode Power Supply

DEPARTMENT OF EEE 10/15/2018


6
Simple Layout Implementation

10/15/2018
12V DC
230V AC

DEPARTMENT OF EEE
SMPS 24V DC
48V DC

7
SIMULATION RESULTS –
Voltage Drop (Matlab)

10/15/2018 DEPARTMENT OF EEE 8


SIMULATION RESULTS
 Wire losses in the DC distribution is negligible.
 Converters can deliver High Efficiency at light loads.

10/15/2018 DEPARTMENT OF EEE 9


EXPERIMENTAL RESULTS
• Over load caused the converters to burn.
• The newly designed converter boards were able to handle our
loads.
• The DC loads were integrated using the same devices used for
the AC supply.

10/15/2018 DEPARTMENT OF EEE 10


PERFORMANCE EVALUATION
 The Voltage drop in our prototype is less than 1%
 The system complexity becomes very low
 DC device meets the specifications of AC loads and hence the
system can integrate directly with the AC system without
notable changes.
 Converters operate at full efficiency and also have built in
protection to overloads hence eliminating the need for fuse.

10/15/2018 DEPARTMENT OF EEE 11


COMPARISON WITH EXISTING
METHODS
Parameter Traditional Method HPS DC Method

Efficiency 89% >89%

Losses Unit loss = 11% unit loss <11%

Cost of end Equipment High Low

Size of the Converter compact bulk

Size of the End Equipment Bigger Smaller

10/15/2018 DEPARTMENT OF EEE 12


Limitations of the Project

• The major limitations are


• Initial Installation cost
• Initial audit of loads is required
• Future expansion of loads need system changes.
• Frequent overloads can reduce the efficiency of the system.

10/15/2018 DEPARTMENT OF EEE 13


SCOPE FOR FUTURE WORK
• This system can be implemented in any household.
• The future demands of the power and need for renewable
sources of power can be meet.
• Project can be developed into a new standard for the Hybrid
Power System network in distribution and consumer end

10/15/2018 14
DEPARTMENT OF EEE
OUTCOME
• The project results to be efficient and will be implemented in
future.

10/15/2018
• The efficiency of the overall system is increased.
• The system will integrate directly with AC loads without any

DEPARTMENT OF EEE
notable changes.

15
CONCLUSIONS
• This project is tested to be efficient and can be implemented.
• The efficiency of the system can be further improved with
help new semiconductor technologies.

10/15/2018 16
DEPARTMENT OF EEE

You might also like