Scribd
Upload
56 views

Introduction To Agvs

The document discusses automated guided vehicle systems (AGVS). It defines AGVS as intelligent, versatile material handling systems that transport materials between locations using programmable driverless vehicles. Different types of AGVS vehicles are described including towing vehicles, unit load transporters, pallet trucks, forklift trucks, and light-load transporters. The key components of an AGVS including the vehicle, guide path, control unit, and computer interface are outlined. Factors involved in AGVS routing, control systems, flow path design, and determining the optimal number of vehicles are also summarized.

Uploaded by

gnanasekar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
56 views

Introduction To Agvs

The document discusses automated guided vehicle systems (AGVS). It defines AGVS as intelligent, versatile material handling systems that transport materials between locations using programmable driverless vehicles. Different types of AGVS vehicles are described including towing vehicles, unit load transporters, pallet trucks, forklift trucks, and light-load transporters. The key components of an AGVS including the vehicle, guide path, control unit, and computer interface are outlined. Factors involved in AGVS routing, control systems, flow path design, and determining the optimal number of vehicles are also summarized.

Uploaded by

gnanasekar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 22

 A material-handling system can be simply defined as an integrated

system involving such activities as handling, and controlling of


materials. Materials include all kinds of raw material, work-in-
progress, sub-assemblies, and finished assemblies. The main motto
of an effective material-handling system is to ensure that the material
in the right amount is safely delivered to the desired destination at
the right time and at minimum cost.
 AGVs commonly known as driverless vehicles, are turning out to be

an important part of the automated manufacturing system.

 With the shift from mass production to mid-volume and mid-variety,

flexible manufacturing systems, are increasingly in use.

 They require not only machine flexibility but also material handling,

storage, and retrieval flexibility.

 It is a battery-powered driverless vehicle with programming


capabilities for destination, path selection, and positioning
 The AGVs belongs to a class of highly flexible, intelligent, and

versatile material-handling systems used to transport materials from


various loading locations to various unloading locations throughout
the facility.

 The capability related to collision avoidance is nicely inbuilt in

AGVS.

 They are becoming an integral part of flexible manufacturing system

installations.
 Now-a-days, AGVS are versatile in nature and possess flexible material-
handling system.

 They use modern microprocessor technology to guide a vehicle along a


prescribed path and makes correction if the vehicle strays from the path.

 A system controller receives instructions directly from the host computer,


communicates with other vehicles, and issues appropriate commands to
each vehicle.

 To avoid collision, communication is necessary among the AGVs. To


facilitate the communication, they are connected through a wire in the floor
or by radio.
 The Vehicle : It is used to move the material within the system without

a human operator.

 The Guide Path : It guides the vehicle to move along the path.

 The Control Unit: It monitors and directs system operations including

feedback on moves, inventory, and vehicles.

 The Computer Interface : It is connected with other computers and

systems such as mainframe host computer, the Automated Storage


and Retrieval System (AS/RS), and the Flexible Manufacturing
System.
 The vehicle types include :

1. AGVS towing vehicles

2. AGVS unit load transporters

3. AGVS pallet trucks

4. AGVS forklift trucks

5. AGVS light-load transporters

6. AGVS assembly line vehicles


 First type of AGV introduced.

 Towing vehicle is called an automated guided tractor

 Flatbed trailers, pallet trucks, custom trailers can be used.

 Generally, used for large volumes (>1000 lb) and long moving

distances (>1000 feet).

Video 1
Video 2
Normal operations carried out in pallet trucks are :

 (i) loads are pulled off onto a spur,

 (ii) lowering of the pallet forks to the floor,

 (iii) pulling out from the pallet, and

 (iv) finally automatically returns empty to the loading area.

Video 3
 An AGVS forklift truck has the capability to pick up and drop off

palletized loads both at floor level and on stands, and the pickup
height can be different from the drop-off height.

 They are capable of picking up and dropping off a palletized load

automatically. AGVS forklift trucks are one of the most expensive


AGVS types. Therefore, they are used in the case of full automation.

 the advantage of greater flexibility in integrating with other

subsystems with various loading and unloading heights throughout


Video 4
the material handling system.
 They are applied in handling small, light parts over a moderate

distance and distribute the parts between storage and number of


work stations.

Video 5
 As the vehicle moves from one station to the next, succeeding

assembly operations are performed. After the loading of part onto


the vehicle, the vehicle moves to an assembly area and stops for
assembly.

 As the assembly process is completed, the operator releases the

vehicle that proceeds to the next part’s staging area for new parts.
After that the vehicle moves forward to the next assembly station. The
process is repeated until the final unloading station is reached.
Video 6
Main advantage

The AGVS assembly line is its lower expense and ease of


installation compared with “hard” assembly lines. The line can be
easily reconfigured by altering the guide path and by reprogramming.
Variable speeds and dwell intervals can be easily programmed into
the system.

However, an extensive planning and complex computer control is


needed in the case of overall integration. Video 6
Some of the guiding factors determining the functioning of
the AGVS are :
 (i) Guidance Systems
 (ii) Routing
 (iii) AGVS Control Systems
 (iv) Load Transfers
 (v) Interfacing with other subsystems
Video 6
 AGVS routing means determining how the vehicle conforms the path

and takes a shortest path between the two points.

 The commonly used methods are :

1.frequency selection method

2.path switch selection method


 Three types of AGVS control systems are available.

(i) Computer-controlled system

(ii) Remote dispatch control system

(iii) Manual control system


 The flow path design is one of the most important processes in the AGVS

design. Some of the important decisions involved in flow path design are:

(i) Type of guide path layout.

(ii) Flow path within the layout.

(iii) The number and locations of load transfer points.

(iv) Load transfer function station storage space.


 The main purpose of a guidance system is to keep the vehicle in the

predestinated path. The main advantage of AGVS guidance system is that


the guide path can be changed easily at low cost compared to the high
cost of modifying fixed-path equipment such as conveyors, chains, and tow
lines. Many guidance systems are available and their selection will depend
on need, application, and environmental constraints. Some of the familiar
guidance systems are wire-guided guidance system, optical guidance
system, inertial guidance system, infrared guidance system, laser
guidance system, and teaching-type guidance system.
 Estimation of the number of AGVs required in the system is an

important element of the system design. Here, we provide a simple


mathematical analysis for the determination of the number of
vehicles.
Dd = Total average loaded travel distance.

Dc = Total average empty travel distance.

Ndr = Number of deliveries required per hour.

Tf = Traffic factor that accounts for blocking of vehicles and waiting of vehicles
in line and at intersection. If there is no congestion, the traffic factor is 1.
However, when more vehicles are involved, the traffic factor value will
certainly be less than 1. Normally, Tf lies between 0.85 and 1.

v = Vehicle speed.

Th = Loading and unloading time.


The total time per delivery per vehicle (Tdv) is given by the sum of
loaded travel time, loading and unloading time, and empty travel time
as follows :

Number of deliveries per vehicle per hour

Number of automated guided vehicles = Ndr / Nd

You might also like